fireblade Posted February 4, 2007 Share Posted February 4, 2007 hi i have purchased a cen gx1 4wd with a .16 engine but it has come with no instructions how to start and i cannot get hold of the seller . can anybody tell me how to start it. also how can i tell if the glowplug is working and if the glowplug heater is working many many thanks to anyone who can help fireblade Quote Link to comment Share on other sites More sharing options...
randomguy Posted February 9, 2007 Share Posted February 9, 2007 you can test whether the glow plug or the glow heater is working by taking out the plug and putting it in the heater. If it glows then everythings fine If it glows for a short time and then goes out then the batteries are flat on the heater If it dosent glow at all then the plug might be blown always carry a few plugs around to test em, and then the fun wont be cut short NP BRad Quote Link to comment Share on other sites More sharing options...
randomguy Posted February 9, 2007 Share Posted February 9, 2007 Quick Guide to starting car Turn on your transmitter Turn on reciver Put glow plug heater on Pull pullstart (quick short pulls) Turning it off Many ways to turn of engine: Put your foot on flywheel is my favourite but you can also cover the Air filter, block the exhaust, pinch fuel line Then turn off reciver Turn off transmitter Quote Link to comment Share on other sites More sharing options...
Samari Posted February 10, 2007 Share Posted February 10, 2007 A good start would be to read the guides at the top of this forum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.