SmugR Posted January 23, 2015 Share Posted January 23, 2015 I`m playing around with a little project and I need a cvd of 125mm long from the centre of the pin in the drive cup, to the centre of the pins on the dogbone end. So far I`ve tried: Lst xxl center shafts, too short by apx 10mm Lst axle shafts, too long by 10mm Looked at some of my buggies and truggies, but couldn`t find anything, so if anyone can help me find a shaft to suit, I`d really appreciate it. Cheers Quote Link to comment Share on other sites More sharing options...
SmugR Posted January 23, 2015 Author Share Posted January 23, 2015 The silver one is too long and the black one is too short???? Quote Link to comment Share on other sites More sharing options...
SmugR Posted February 12, 2015 Author Share Posted February 12, 2015 Still on the hunt, 125-127mm is the sweet spot. Quote Link to comment Share on other sites More sharing options...
evssv Posted February 12, 2015 Share Posted February 12, 2015 Still on the hunt, 125-127mm is the sweet spot.Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=301519984499&alt=web Not a cvd thoughCheck out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=271734039637&alt=web Quote Link to comment Share on other sites More sharing options...
evssv Posted February 12, 2015 Share Posted February 12, 2015 Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=331454590053&alt=web Quote Link to comment Share on other sites More sharing options...
evssv Posted February 12, 2015 Share Posted February 12, 2015 Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=291379414446&alt=web Quote Link to comment Share on other sites More sharing options...
SmugR Posted February 12, 2015 Author Share Posted February 12, 2015 Good shout!! Thanks, 2nd & 3rd ones look interesting, St dogbone I'd just have to add the cup from the diff end. Although the cvd type ones tend to have a longer cup.... Ill try it and report back:D Quote Link to comment Share on other sites More sharing options...
evssv Posted February 12, 2015 Share Posted February 12, 2015 Good shout!! Thanks, 2nd & 3rd ones look interesting, St dogbone I'd just have to add the cup from the diff end. Although the cvd type ones tend to have a longer cup.... Ill try it and report back:Dno probs ... Quote Link to comment Share on other sites More sharing options...
SmugR Posted February 13, 2015 Author Share Posted February 13, 2015 Had some St pro centre cvds off, so tried one and it's too short overall. Will try a dogbone one off the rtr but the overall length ought to be the same.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.