jasonr1 Posted July 24, 2014 Share Posted July 24, 2014 Hello people is it ok to use a " HPI Flux Vektor 4800kv Brushless Motor" with a "Castle Mumba Max Pro ESC" ? Thanks friends... Quote Link to comment Share on other sites More sharing options...
Noj Posted July 24, 2014 Share Posted July 24, 2014 You could, although the motor specs advise it is best suited to the flux vapor/vapor promesc, as the can is suitable for 2s only. Quote Link to comment Share on other sites More sharing options...
jasonr1 Posted July 24, 2014 Author Share Posted July 24, 2014 Wot about HPI Flux Shot 4300kv Brushless Motor ? Quote Link to comment Share on other sites More sharing options...
oodboo Posted July 24, 2014 Share Posted July 24, 2014 It will work but you're pairing an 1/8th scale esc with a 540 size motor that's usually used in 1/10th cars. Just make sure you're either choosing the right motor and don't need an 1/8th scale motor or that you have space in the car for the esc. Quote Link to comment Share on other sites More sharing options...
jasonr1 Posted July 24, 2014 Author Share Posted July 24, 2014 Ok so can you recommend me a suitable motor for it ? Quote Link to comment Share on other sites More sharing options...
oodboo Posted July 24, 2014 Share Posted July 24, 2014 What car is for? Quote Link to comment Share on other sites More sharing options...
Noj Posted July 24, 2014 Share Posted July 24, 2014 (edited) Wot about HPI Flux Shot 4300kv Brushless Motor ? catergorically not, as that is a 380 rotor in a 540 sized finned can. Is this for a slash 4x4? If so, an SCT specific set up is what's required, and yes, eighth scale set ups work fine in a Slash Edited July 24, 2014 by Noj Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.