Search the Community
Showing results for tags 'Spares'.
-
this is a joblot sale only i wont be splitting anything from anything if you want something then buy the lot lol i have a set of four topcad black alloy wheels with maxxis trepador 2.2 tyres fitted the tyres are like new ran only twice and the wheels are like new aswell though one of the beadlock screws is missing but this does`nt affect the way they work selling a brand new never ran novac m2 dig 3s esc it will come with two 55t terra claw motors that were never ran but the esc was used once and all the leads needed it is no longer needed so grab a bargain one set of 2.2 axial beadlock wheels with proline badlands tyres both are used but plenty of life left on the tyres as can be seen in pic s looking for
-
http://www.msuk-forum.co.uk/gallery/image/34466-losi-8ight-body/ Hi all For sale I have a Losi 8ight 3.0 clear shell which is brand new out of a kit. This is surplus as its being converted to brushless. These appear to cost around
-
I'm planning on converting my hyper so I'm selling the engine, exhaust and air filter. It's a force 32, it's had roughly 2 UK gallons through it and has tons of compression. Price includes force 32, hobao exhaust, manifold, Hong nor red alloy clutch and 16 tooth pinion, pullstart, OS8 plug and air filter. I will also throw in the fuel tank and lines, the tank is slightly melted on the exhaust side but still sealed perfectly fine. I'm after
-
Up for sale due to me more or less dropping the hobby due to other hobbies is my Cessna EP400 4 channel plane. This plane was last used a couple of years ago but on a fly-by got caught in a tree and this the rear elevator and rudder sheared off. One side of it is left hanging but the rudder went completely. I don't have the charger to charge the LiPo battery so I can't test it properly, so because of this it is sold as spares or repairs. All the electrics are present except from the battery because it looked as if it had swelled. The plane comes with the controller as well. -
A few Overlander Chargers surplus to requirements:- 1/ RC6-Touch - No box but in great condition.
-
I am selling the majority of my kit so first up is my DX4s. Only been used for 2 rounds until I switched to a stick set. I bought it new from wheel spin. Comes complete with original box, logic carry case, 1 receiver, 2spare grips, some stickers, and instructions. Only fault is a nick in the aerial where I lost the aerial tube in a race and the aerial dropped onto the exhaust. Has been used since for racing with no trouble at all.
-
Spares F.s steel hyper shock mounts - read before you assume
ashleysmith posted a topic in For RC Sales
I don't know if anyone remembers the story behind these??... Basically myself and another user came up with the idea of using 6mm steel to make shock towers for the hyper 7 (and other models that take this style of mount) After being screwed around by the laser cutting company I used (who did something to the drawing and didn't cut them 100%!) Can anyone use them? The rears are a slightly loose fit on the housing (though if you still the fixing holes in the right place they WILL work!) and the fronts are a tight fit (will need some material filing off! I'm not sure how much to price these at... I know I'm not going to recoup my money on these so I would be selling at a massive loss! So the price is negotiable!! But sales require a price so... -
Set of four brand new unused Pro-Line Dirt Hawg 1 2.2" buggy tyres with foams. Withdrawn Height: 3.62" (92mm) Width: 1.73" (44mm)
-
7 shorty lipos for sale 2 nanotech's, no swelling as per pic, as only 3 cycles old each 5 ip's, all have swelling,as photo, but still hold full charge and not noticed any performance loss
-
Alpha Z852 combo, just been broke in, was bought for use in my trusty but I've sold that so this is now a spare. Stored with after run oil at bdc after every run. Warmed with engine heater before use. Ran on byron fuel. Roughly half a gallon old like I said it's just been run in. Comes in originals box, not pictured, with all venturis and sticker sheet. Practically brand new! Asking
-
Have 2 body shells, both Hong Nor Style. Condition as the pics (not great but usable) hence price is really only to cover postage. (
-
8.5t thunder power motor perfect working order
-
NOW SOLD
-
four alloy wheels fitted
-
Selling my charger as I will no longer need this. Asking
-
!Only the arms left! So parts are as follows: Truggy 8ight 3.0 - 3.0-E & 8ight RTR Front arms TLR244017...
-
Here I have is a little buggy I picked up the other day, it was all in pieces and iv just put it together to take the pictures of what it looks like, its no good in bits you'll never of known what it was, I'm still none the wiser, i know nothing about nitros, from what I can make out the engine is all there and the head is off, don't no why but when I checked the bore and piston it all looks fine, held the he'd down and turnd it over and its all good, it no interest of mine im into 5th scales, it needs a pull start and a front suspension middle mount, the screws have been snapped off inside, easy fix for about a
-
Tech spec. http://www.tamiyausa.com/items/radio...rushless-45057 Very smooth ESC. New in packet. -
all sold
-
Spares Tamiya CC01 - Junfac Alloy Front Skid Plate (NEW)
RadicalEdward83 posted a topic in For RC Sales
Tamiya CC01 - Junfac Alloy Front Skid Plate (Brand New) -
I got these for a project but never got around to starting it... so just looking to sell them on to someone that can use them and get back what I paid for them... All New - - Don Jar High Jack - Don Jar Land Rover Front Light and Grill Type 3, I have added some axial LED Buckets and Lens just attached with the nut. so can be removed for painting. - Don Jar Rear Land Rover Bumper Type 1 - Comes with mud flaps - Don Jar Wing Vent Covers Type 1 - Comes with fine mess to go behind them. - Thin Metal style grid Land Rover Grill - Comes with 4x Very Small Nuts and Bolts
-
See my post further down for the HPI parts added with prices. Right my project has been abandoned as I've brought a Axial Yeti. So rather than trying to sell it whole I've stripped the Slayer. Most parts are available but I'm probably going to keep the screws, shocks and a few other bits I can use on my Summit. If you see anything you want just pm me. Some things have very slight surface rust from being stood around but it's literally surface. Prices include P&P but you must pay fees, payment by PayPal only I'm afraid. Suspension cantilevers (complete with bearings) and posts -
Here we have most of my parts from my Losi I am breaking, the whole car only had just short of 3 tanks through but no time and to get more of my money from the build I have chose to strip the car. So to start here goes: Wheels and tyres -
-
comes with gv 2 speed clutch and cpv racing twin exit exhaust and air filter all it needs is a need pull start or rotor, it has a 12mm hex thing where the pull start is
-
the clutch housing has had very little used was just brought and left to sit, bearing spin perfectly no dings or any damage apart from little scratches
