Jump to content

wave ace

Members
  • Posts

    115
  • Joined

  • Last visited

Everything posted by wave ace

  1. picked up a team associated Rc8e roller (bit of a mess) with no electrics or wheels but with LOADS of spears (some still n during the week then got a second hand motor john and esc plus servo and wheels spent a few hours getting it runningwent it for a bit of a bash and runs well a few loose turnbuckles and steering block bushes need doing also need a smaller pinon as motor was getting a bit hot
  2. No you will need an orion one
  3. I think if your tiers are ballooning to much then to you need lower the power down a bit (lot) as all the power is just being wasted
  4. as above I run a 12t on my hyper still goes like ****
  5. agree with the RPM mush stronger but not OTT like aluminum
  6. Swap over the wires on the motor and the few/Rev switch on the transmitter
  7. why do you think a 7.2 volt lipo would be faster then a 8.4 nimh ?
  8. Blown out another battery 3rd one in 3 weeks now skint (again) ordering new ones rather then keep buying secondhand http://www.msuk-forum.co.uk/gallery/image/33159-/ cell 1 & 2 1.8volts cell 3 2.9volts
  9. the sizes are on there Main Compartment Size: 560x360x180mm Medium Compartments Size: 180x290x70mm Small Compartment Size: 140x200x50mm
  10. If not sold I will have this pm sent
  11. yes no problem just takes twice as long to charge
  12. Hoboa part number H90015 cant seem to find anyone with them in stock
  13. getting the right size wheels on will make it go a lot faster
  14. you may have clicked on one of the options on the left
  15. First run with my new (secondhand) Hyper SS cage its FAST running a 2100kv brushless on 2x 3s 5000 19t pinion Tires are ballooning like anything and the motor running HOT so have ordered 14t and 16t pinion to see if that helps
×
×
  • Create New...