bert uk

SOLD!

price drop.just

SOLD PLEASE CLOSE------------------i have a load of standard maverick scout parts for sale .i would like to get rid of it as a job lot.everything in the pics. ..2 axles one missing stub axles otherwise complete,standard motor with 19t pinion gear,chassis plates,bumpers,drive shafts,one has u/s thread.std servo,and 4 shocks ,battery tray with clips..all very little use.

not sure about that one,however this is what ive done to mine,i put shrink tube round the joins so if they do pop ill find the bits.and it also keeps them clean too.just a thought.

just need rear lockouts and axles now

ok that sounds great .thanks.will pm you etc .cheers

front "c" and steering knuckles.also rear solid axles and lockouts.not fussed what colour .aluminium please.thanks

sorry guys been busy,still looking for price

bi have pictured ax10 scorpion,has 3 lipos.one 1800 and 2 2200,all green is alloy upgraded stuff,axle rear,and steering etc,all electrics moved,lowered etc.used 3 times in last year,all good,drive shafts are booted and greased also stainless grub screws,as said full kit,all you need is lipo charger ,even has duracells in tx.reason for sale one of my motorbikes need help so this has to go.has 45t tekin motor also have original 55t too.thought i'd ask an idea of price before sales section.thanks all.

here's my two staffs.buddy 7 months,and keeks 6 years.

http://www.msuk-forum.co.uk/topic/186893-axial-scorpion/ heres where i put mine on ax10.may be some help?

well it has a 55t ansmann at the moment which is a great glitch free motor,someone s sending me a 45t teken to use so ill see whats best as and when.

fiddling around as usual and this is my take on 4 link.didnt have any alloy plate about so i used 2 old heat sinks from computer parts.they add weight to the axles because they are copper.also i moved the esc to the front behind the servo and put the battery on the rear.apart from the receiver which is under battery tray,all the electrics are now on the axles.got all the movement i want on the suspension and nothing binds or interferes.ive run out of rod ends now for the steering,so when i get some more ill test it outside

tried to pm but no good?

due to being jobless right now i managed to get meself an axial scorpion for cheap.of course ,soon as i got it i took it apart- and went to work oiling greasing and.all i found wrong was a few flea sized grub screws missing.bought 6 of them and loctited them all in.nice now.apart from weather.so i tested it in the house.but the staff in my profile pic didnt like it and chased it all over the place.lol.ive got it in a ally case now .away from chewing teeth thats buddy!! and also its lasted 10 times longer than my glider already! !!

SOLD!

sold pending payment

got this as xmas present from mrs.bless her. so out i go on boxing day with it and.blam!!went up about 4foot and then went over.im affraid it was my fault.itching to test it .watching vids and stupidly filling myself with confidence.that little episode saw any interest drain away rapidly.so im selling it.(she does know ) all that s wrong is the canopy is cracked,the landing gear one part of it has broke,the tail plain bit is gone.however,it will need wiring up to the receiver because i used it for a glider.which i crashed too.oh dear.should of bought a ceiling fan!! everything i got and in the pic is up for grabs.ill split if enough interest. radio is 6 channel 35mhz,with charger and battery pack,lipo is 11.1 2180mah i put it as artf cos it will if these few issues are resolved., ill say

thanks again mate,thats hit the nail on the head"waste my moolah" turning a

thanks alex.

ok mate,just wondered that point seeing as i have enough batteries left to power a small town! also i have "rcgeeks"on my doorstep,only found that out googling the scout!!about 1 mile away.smart!

banners,im in crawley west sussex stretch,thanks for that .i guess upping the voltage is a disaster?lol.

ah i see nice one.im guessing your lipos are 7.2volts?cheers