GingGangGooly

pm'd re: Orion 1600's

pm sent re: lipo

The only Atomic shocks I can find are the grease shocks, on eBay in the USA click here Have a read of this article on the Micro-T forum Shocks - how to get best performance, there are tips, videos and lots of other good info on this site for the micro-t

Rcmodelimportsdo a good range of Micro-T hopups, with free shipping. The place is run by Cain and he can normally get hold of other items for Micro-T not listed on the site, can take a week or 2. RCpitstop carry spares - just brought my Losi 1/36 brushless setup from here. Cheapest I could find. There are other sites in HK and US, but you would have to wait for delivery etc. etc. There is also a dedicated Micro-T forum based in the USA, which does have some of us Brits visiting it

Below is a simple 2 channel rx (receiver) that will show the pinouts to test with your meter. If you only have a 2 ch rx, then all the slots will be full - battery on first pins, esc on throttle pins and servo on steering pins. If this is what you have, then use a servo Y-lead to split the battery feed to the rx and fan.

pm sent

I had the E-savage then the E-zilla. Both the same. Best thing I did was to replace the ESC with the Mtroniks truck dual motor ESC, far more reliable IMO and also give you working breaklights you can wire in to your shell

pm'd - Hobao 27mhz radio gear

I got my micro plier set from MachineMart. Cost about

Thanks, I already saw those. They are an extension for 20mm hubs, which alas I don't have.

As per the title, I have a set of 20mm Losi wheels (LST2 I think), which look as they they have never been used, or used once or twice. Anyways, I have a Savage X with 17mm hex (and 23mm adaptors) and would like to put these bad boys on. I can't find a 17mm->20mm adapter or 23mm->20mm downsizer (that sounds wrong). Am I right in thinking I have a couple of options: 1. Sell the Losi 20mm wheels on as is 2. Strip the tyres from the wheels and mount them on 23mm wheels If it is (2) above, will all the 23mm wheels fit or do I neeed to research sizes etc. etc. and is there a n00b guide on this as I have never stripped tyres from where (other than by accident) <- lol Thanks

Thanks for all your quick replies I picked up the diagram below from a different form (can' remember the name - sorry). This is how I intend to wire up my EVX-2 when GV the LiPo Protector arrives from Modelsport.

Sorry to jump in on this thread, however I think my question is relevant. Can somebody explain how the EVX-2 handles the 2 batteries? I have an E-maxx 16.8V, whcih I gather from reading threads is the same ESC as used in the E-Revo. Am I right in thinking that 1 battery is used to power the motors, which can be determined by plugging 1 battery in and seeing if the ESC lights flash. So, what is the second battery used for? Servos? Sorry if this has been asked elsewhere, if there is another thread please can you point me to it. Thanks in advance

I will buy this. Let me know your PP. Cheers

N1 - cheers