Highlander

We used to have a cat that had 3 legs most of its life after someone ran it over, you'd be amazed at the heights and areas he could get to with 3 legs

How to polish a turd with another turd

Roverman or Victor Meldrew are probably your best bet on here.

To clarify, as i cba to read all the thread, Using a lower MAH pack with a higher MAH pack will see that the lower one discharges to the cut off point before the other. Why? Because when the lower pack's Volts get to the threshold, The other larger pack will still have higher volts due to the higher MAH at this point, which will throw your ESC's LVC off as it cant tell exactly which battery the voltage is coming from. For example, and im pulling these numbers out of thin air. Battery 1: 3.2v -3.2v Battery 2: 3.8v - 3.8v Adding these voltages up gives us a reading of 14V, now the norm for cut-off is 3.2v (usually) which is 12.8v, so if we ran this combo down from 14v to 12.8v, the cells in the lower pack would then be beyond the 3.2v cut-off and risk damaging the pack beyond use. This is why you dont mix different MAH ratings on lipo's. Somebody else probably already pointed this out but i cba to read through all the tripe. I emphasize the word RISK, if you know what your doing and know when to stop using the packs yourself, then by all means go ahead. But read up a bit on it before you delve deeper into the world of lipos.

Merica'

Mayzie got the Fap Fap.

I love how the brightness of a light determines whether your a chav or not

Oh noes! Not that muppet Bez! Good job bud!

Hi, im a nooby at this game so im wondering what u guys think is the better option to go for? Thanks.

Figure of 8's manny, not 8s lipo

They are rears. Far too wide for fronts.

They did repair it, and replace the screws, but it still doesnt work. so there repair was shoddy if indeed done.

The exact same thing happened to me 2yrs ago nick, sold an iphone 3 that worked, broke a week later with the buyer. Didnt matter what was said, PP rewarded full refund. :|

The motor plate in it was probably for nitro fitment?

Sorry think pics broke for me, getting a double image

cant see a point in aluminium cvd's on a 1/5th, fair enough saves a few grams on the drivetrain but they'll get mashed alot quicker.

Instead of wasting YOUR time driving there why dont you just buy it online and save us all the hassle? Baffles me how your determined to waste travel time & fuel to stick a piece of plastic in a machine.

Ive only ever used Hostile or TFE bearings branded too fit in the Hostile hubs. Maybe there are slight differences in other brands if it isnt?

Odd problem, i had a job getting bearings in brand new ones. Are they the standard bearing or the over sized version?