martin34

no, so long as you only use the google play store for apps you'll be fine. Obv don't install any 'new' app that offers (illegal)free movies etc

Thanks for the replys.MAZ I will let you know how it goes.I got it because my local store were doing the hudl 2 and galaxy young 2 for

Oh and yes it runs kit kat.God knows what that means tho lol.

Thanks for that.I dont have any red here just blue.Would that be ok or do i take it it wouldnt dry?

blue drys hard, red doesnt

Well i have used a bit of ptfe tape and it has worked.the bearings are nice and firmly in place now.

Its a 20 tooth

try 18t pinion and check temps, if they are cool then go up a tooth, if hot go down a tooth until it gets cool

Thanks mate I will order an 18t and give it a go

Glad I don't live at your house then!

I think its because the 2nd gear has some sort of slipper and if grease gets on it it will mess up the gearchange and if any grit gets in the gearbox it will stick to the gears and grind them down

So Nitroholic can I get the grease off and out of the 3 speed without stripping all the gears down?

Nope. Only way to get the grease out is to strip the gearbox...and that means taking one chassis side off

I had one on mine and seemed ok, certainly looked good

Cheers AJ I will order one on payday

No mate. http://dhrc.rchomepage.com/RolloutCalc.htm

I cant click on the link mate?I was going to run an 18th pinion with 44th spur.If I left the pinion 20th what size spur would I need to make the equivalent of 18/44?Hope that made sense

ditch drag brake for sure !

drag brakes ruin your jumps{bring the nose down too soon},touring car thing really

Drag brakes are for rock crawlers, you dont want it for racing, buggies, any rc really exept rock crawling :-)

Thanks I see what you mean but the flames will be prity small so they will be hard to mask around.I am now thinking I should do the shell red with white flames.That will be alot easier

you can do it, aslong as the white is sprayed thick enough it shouldn't make a difference

mask off the areas to be white, shoot more coats of the red so say 5-7 coats thinly. once fully dry, remove mask and spray the rest white, the thicker red coat will help stop pinking and give that lush red on the can, its more consuming with time doing it this way, you will struggle to blend the flame coloring to the white shell

worn ball joints and ptfe tape. Why didn't I think of that!

it's nuggets like that which make me always scan the status updates now!

I even put some round the part of the screw that is inside the ball when needed For imo it provides the perfect balance odf slop removal yet maintain the "give"

soon the bells will start

I cant wait lol

lol

Nor can i if i get a fusion of some kind lol

Legit

The rx is missing.If I remember rite it stopped working so the lst got left in the shed.I wander if my mini 8 motor could be made to fit

It could do its got to be worth a try

I just compared the length and there no clearance issues

I take it,it is stronger?

not so much stronger, just slightly different flavor. Made with fruit of the amarula tree

I will have a look for it in the morning:)

What did you use to do that? I might de-purple my Flux parts too.

I used costic soda.A bowl of water with some of the costic soda takes the anodising off in no time but dont make the mixture to strong or it will burn the ali.

lipo does wake up stock set up!

Might give it a try. Been thinking about it, as original batteries "shot", but was a bit wary about increasing voltage by 50%.

From what I have read its fine to run a lipo in the stock non brushed truggy.I was recommended to get some brass pinions tho.R46 it certainly does:)

i thought that.i looked at your profile and saw all largescale cars and a savage xs:)

i got an Ep8 too, its supposed to be sold but its lingering like a bad smell :/

Hopefully you will be gone soon mate and the sale will be sorted

KHZ!