tt-01 mamba Posted June 8, 2010 Share Posted June 8, 2010 (edited) Hi, Last year i bought a hyper that looked like it dived headfirst into some concrete, finally got round to cleaning it up and the cost to get it running is too much so it's gotta go. Hinge pin set, Full set of steel hinge pins, bit dirty and one is everso slightly bent but it still goes into the hole and doesn't bind. £3 Mach .28 back plate,Few scratches from the toolbox, offers Mach .28 crankshaft, good condition no signs of wear £5 Hyper 7 front CVD's £5 SOLD Battery box with switch SOLD Rear roll bar, Few spots of rust (yes rust) on the steel ball joints in the mounts. offers Complete arm set. Slight surface rust on the turnbuckles, but a wire brush will get that out easily., no broken bits. £7 Center Diff, Surprisingly good nick The main gear is in great shape, so are the bearings and innards. has been completely rebuilt might need filling with oil. (can't remember if i filled it up) Comes with outdrives and bearings. £8 Front Hubs No problems here, standard hubs with bearings SOLD Wheel nut set and 2 hexes. Can't remove the other two hexes (concrete ) SOLD Wing mount, Good condition £5 Any offers welcome (just not too stupid) I'll accept cheque, cash or paypal here's my feedback to be added in a bit, Thanks for looking Edited June 17, 2010 by tt-01 mamba Quote Link to comment Share on other sites More sharing options...
ravenguard Posted June 8, 2010 Share Posted June 8, 2010 pm'ed Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 8, 2010 Author Share Posted June 8, 2010 (edited) Air filter, no tears anywhere. SOLD Fuel tank, Comes with fuel filter. The exhaust has partly melted one side but it is still watertight. Mach .28 cooling head, Few minor scratches £6 Some chassis braces, One is the center diff/break top part, the other is a hinge pin holder (not sure front or back) £3 for both. Edited June 9, 2010 by tt-01 mamba Quote Link to comment Share on other sites More sharing options...
Stoka Posted June 9, 2010 Share Posted June 9, 2010 If you strip the brake pads let me know Need another front diff housing too and shock towers. Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 9, 2010 Author Share Posted June 9, 2010 Shock towers have been deanodized, they look a bit rough so i'm gonna take them to school to buff them. Brake pads... don't think it actually came with any i've got the break disks. Quote Link to comment Share on other sites More sharing options...
carlcurtis83 Posted June 9, 2010 Share Posted June 9, 2010 How much for the hexes posted? Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 9, 2010 Author Share Posted June 9, 2010 Hexes and nuts, Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 10, 2010 Author Share Posted June 10, 2010 Bump, Offers considered on anything. Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 11, 2010 Author Share Posted June 11, 2010 bump Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 14, 2010 Author Share Posted June 14, 2010 bump, Quote Link to comment Share on other sites More sharing options...
tt-01 mamba Posted June 15, 2010 Author Share Posted June 15, 2010 Bump Quote Link to comment Share on other sites More sharing options...
upthepotters Posted June 16, 2010 Share Posted June 16, 2010 i will have the knuckles mate Quote Link to comment Share on other sites More sharing options...
Smoothybb Posted June 17, 2010 Share Posted June 17, 2010 PM sent on the cvd's mate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.