It just keeps beeping at me

[william smith101]

My Ares gamma 370 pro V2 won't work it just beeps at me and it won't let me the throttle or any of the servos. The beep sound listen like it is coming  from the motor

[c0sie]

Have you set the end points on the ESC? WOT/no throttle etc?

If its beeping it sounds like its expecting to either be bound to a transmitter, or having its end points defined.

[william smith101]

Like I'm still using it stock but it was working yesterday and then left it for a couple hours and then it just started beeping

[william smith101]

Also one time I was trying to fix it it started up to like half throttle even tho the transmitter stick was in its no throttle position and the motor got really hot

[c0sie]

6 minutes ago, william smith101 said:

Also one time I was trying to fix it it started up to like half throttle even tho the transmitter stick was in its no throttle position and the motor got really hot

 

Sounds to me like your throttle points arent set correctly to the ESC - it wouldnt hurt to re-do them, just follow the steps in the manual.

 

Could the beeping be low voltage cut-off at all maybe?

 

[william smith101]

I will look in the Manu to see if I can but I'm kind of new to world of RC so it might be a challenge

[william smith101]

There isn't anything in the Manuel about throttle end point and by voltage cut off do you mean that the esc isn't getting enough power from the battery

 

[c0sie]

On any ESC that is compatible for use with LiPo's the ESC will allow you to have a low-voltage cut-off enabled - that should be mentioned in the manual?

https://www.miniplanes.fr/images/pdf/384385/notice_azsa1600eu.pdf
There is a section in this manual about pairing - does this help at all?

 

[william smith101]

I've got the pro version of the gamma by the way

[william smith101]

Thx for all the help but ive now got it fixed. it turned out one the motor leads were not in completely and the throttle was in reverse

 

So thank you again for all the help!!!