Search the Community

I am selling my team C V2 car. it is in excellent condition. clean underside with very little marks, nothing is broken. Im selling it because i never use it at all. this is very fast buggy. It has gear diffs (50k) Brass T plate. brand new schumacher stagger cut wide up front. used but not worn rear yellow spikes. new schumacher rims in black the shell is sprayed in silver. new saddle nano-tech 90C 6.0 batteries LRP X12 6.5T motor old hobbywing SD 120A ESC Futaba BLS352 (brushless 0.15 servo) few spares i.e anti-rollbars, wishbone arms, old wheels. You need to put your own radio system on it.

Hey peeps. I am selling my Traxxas Revo 3.3 due to having trouble with the police cause my neighbours keep calling them out. Lately Ive been bashing in Lordship Lane Park and there was a big puddle and the truck went into it. I guess water went in the servos cause once you Turn it on it starts shakeing. and the receiver is blinking red. I tried disconnecting the servos and just turn it on while only 1 servo is connected and the Throttle/Brake servo is ok but if I plug in any other it starts shakeing. Now im not really into repairing it cause I dont have the time to do it. The engine (Dynamite T19 pullstart/was 130pounds) is brand new (2 weeks old) and only 4 liter/1 gallon of fuel has been run thru it.It has fuel filters on both fuel lines. Starts easy, and has allot of torque and a really good top end. Brake in process properly done with good weather conditions and allot of patience. I have allot of spares with the truck: Traxxas 3.3 engine for spares cause compression is really low so if you want to run it it will need a rebuild kit. 2 Traxxas OptiDrive unit EZ Startbox with 1800mah battery and wiring for the truck Stock Air Filter Replacement Steering Servo 60CM Silicon Fuel Line from Proline Racing Multitool for Glowplug/Wheel Nuts Glow Plug Igniter + Charger 2 Sets of AA Arms unopened. 2 Dynamite Glow Plugs The truck doesnt have a bodyshell cause it was too shreded and I throwd it/ The Truck is Located in North London for collection but I can send it via RoyalMail in all the UK. I would like to get 200

Picked this roller up and got a brushless motor for it, but decided I'm putting more funds in to Short Course racing than this project at the moment, which is a shame as it's an excellent condition car. Comes with a standard servo, and silver can. Along with a brand new 5200kv brushless motor. It needs rear body posts, and the shell has a crack in it (you can see in the first photo) and a window cut out. Other than that a very neat and stock roller great for a rally project, wheels are new and need gluing.

Losi dbxl All stock I do have a couple of new upgrades ill include ddm throttle linkage, team twisted throttle pivot and a crazy stu chassis machined from 7075 aluminim

This is in mint condition.. http://www.ebay.co.uk/itm/231651208628?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Up for sale my G_made Sawback.. http://www.ebay.co.uk/itm/231650852545?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Hi All I have an hpi savage 4.6 up for grabs Runs great but i have put the tune back to stock (flush/flush) as i am unsure which fuel you will be using, i was using 25% Come with a savox steering servo so it turns well and also come with a twin exhaust which looks and sounds good. The shocks have socks on them to keep the crap out and it is fitted with a tank guard, it is also on a pull start. Comes with two shells, the original has seen better days but is still usuable and a new dodge shell that has been cut out and ready to paint. Pics below

Hi all Pick up from Romford Essex or if split I can post separate bits like the monster pro max Buyer pays fees and postage

So I'm selling my newly acquired M8, I have run it 8 times on the new Nanotechs I bought to go with it. It's got a few upgrades, t bone bumpers front and back, traxxas shock ends, exotek carbon top plate and spur gear guard. New Associated RC18 pinion and fresh losi spur gear. Mesh is set and runs great. I opened up the diffs when I got it and greased them for peace of mind. This is a tidy little M8 ready to run. Comes with manual, original parts, diff cases, 1/10 touring car wheels and tyres and the turnigy nanotech 2200 2s lipos. Delivered for

Selling this HPI Mini Recon which i converted over to brushless. comes as you see in the picture, running a Turnigy XK2430 - 5800kv brushless motor and a 30a ESC (not sure of brand) battery is a 2s nano-tech 1500mah 25-50c discharge, car runs for about an hour on a single charge. completely stock other than adjustable turn buckles, comes with a RC18 Nissan shell painted green, fits very well. you will need your own charger and your own TX & RX to run Looking for

Hey guys, Going to be getting back into electric so it's finally time to sell my Savage, this has not been used that much and probably once on a weekend here and there due to using my slash a lot more. During the time I've owned it I've tried to take as much care of it as possible as with every RC, it has had after run oil after every run and has been stripped and cleaned after every run as well. I've made some changes such as got rid of the hump pack and changed it over to a lipo so saves having to buy batteries. If collected I will include a nearly full bottle of fuel, it will come with the rotostart with the battery and charger included for that. All you basically need is a TX/RX and a charger for the lipo, overall it's in great condition and engine has still got plenty of compression. The only thing it needs is a one way bearing which broke on the last run however you can grab one off of eBay for around

Selling my baja as it just doesn't ever get used

Losi Mini Rock Crawler in good working order, has been converted to 4-link with a custom 3d printed 4-link/servo mount, the front has been overdriven with a traxxas pinion. RC4WD wheels and Axial ripsaw tyres.includes ESC, Servo and 6 Lipos, just need radio gear.

I'm sort of in two minds about selling this - I got it a few days ago and its been great fun but its just not really what I want. It comes boxed with with everything you see(and a few more plastics in the box too) New servo installed too! It has Alloy big bore shocks on it Brushless 13.5Tmotor (sesored) The ECU has been upgraded to the 8th scale one(as apposed to the standard unit) Sensored CVD driveshafts 3000mah Battery Comes with: Car ready to go 3000mah Battery 2.4 GHZ TX/RX Few spares in the box alternatively I would like say

Losi LST 1/8 monster truck for sale comes almost RTR just need 3ch tx and rx comes with Roto start STS 28 engine and roto starter with 7.2v battery 1600 rechargeable hump pack 2 speed gear box with forward and reverse Hi/low range gearbox for high speed and crawling Fibreclass ford f150 shell Massive bigbore shocks box of spares

4 cars for sale I got these on Ebay and dont have the knowledge or parts to get them working. HPI seems to start and servos work but needs transmitter and reciver, electic Traxxas motor runs and has ESC. Nitro Traxxas X2 need EZstart to see if there running, servos all seem okay other than one. These are listed on Ebay. http://www.ebay.co.uk/itm/252043877666?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Sorry dont know how to add pictures.

Hi Guys, i have for sale a DJI F330 with naza v1 possibly v2 I honestly don't know which (flight controller, pmu v2, gps, iosd and led) comes with a selection of motors and some spare props it also has a fpv camera and a fatshark transmitter there is no Radio gear included in the sale as i am using this on something else. I have managed to get this to fly once but my flying skills are poor to say the least and if I'm honest i just didn't enjoy it (was too scared of flyaways) I'm looking for

hi guys got a schumacher big 6 here i converted to brushless up for grabs is in mint condition usuing the tracstar 1/8 2300 kv combo would be good for some 1 to run in the speed championships seriously quick home made motor mount not drilled any hole in the chassis to make this fit so its not bodged together sorry for putting no pics up as im not sure on how to will put up a link to my swaps page though http://www.swapz.co.uk/swapz/5437174/schumacher_big_6_1_6_scale_brushless_converted_HUGE_/ want to know more please ask

I'm ideally wanting to trade this for something electric, however seeing as I haven't owned anything electric I have no charger, batteries etc. This is an most rtr maxx, just needs the typical consumables like fuel, controller batteries glow plug. The compression is 'ok' but would advise a new piston and liner. Truck is in great condition Looking to trade for something electric and off road, maybe a stadium truck or buggy. Location is Manchester and ideally would prefer a face to face trade. Edit just having issues uploading pics, just working on that now

This is my Mini 8, in very good condition, comes with stock motor and esc, also a new Gens ace 3s, 1800mah lipo. Also comes with the metal geared Allturn servo, but the receiver is NOT included. Hop ups include: Carbon top deck Carbon shock towers losi alloy front hubs losi alloy front knuckles losi alloy rear hubs losi alloy suspension mounts front and rear. hard anodized shock bodies with gold shafts rpm rod ends anti-roll bar kit carbon battery hold down with custom battery tray Looking for offers around

Brand new, boxed, only opened to check and photo. http://www.hongnor-racing.com/pdt_view_cars.asp?area=59&sn=1058# X3 GT Nitro 80% Kit - Built by Hong Nor and sold in the US as an Ofna originally, though now supported by http://www.igt8.com/ due to there being no current US distributor for Hong Nor. Built off the X3 chassis mainly, though obv has some specific parts, and also has a few bits off the OFNA (Hong Nor) DM1. Wheelbase is the same as the Serpent I believe so there's other body options if wanted. Has a 2 speed transmission and comes part built, and includes clutch bell, engine mounts, pipe etc - require engine .21-.32 recommended, servo's, radio gear and flat hump pack (fuel and paint too obv!). It's a very nice kit, includes some of the upgrades (i'm told) from the V2 Pro Buggy. It has been competitive racing in the USA, with very little $$ spent on it, in it's opening season (last year), and from what i've seen has held it's own against the new Mugen this time out. In the speed group I'm a member of someone has pushed one over 130mph - it's seems a very capable design. There's an e version, so stock conversion parts if wanted, though for >100mph you'll be wanting some custom bits. If there's no interest here I'll list on ebay etc for closer to retail, though offering here very cheap first to recoup most of my costs. Asking price is

Perfect running condition, Extras: Hobbywing EZRun 1/10th Brushless System - 9T Motor/ 35A Speed Control Aluminium shaft Configurable steering kit On the price included: Programming card of Speed control Genuine WRC Subaru body Not included: Radio transmitter receiver Battery- charger. If you are interested you can personally check the car and its condition. Collection in person from Leeds.

Perfect running condition, Fully tuned with the following extras: Etronix Photon 2.0 SBS 1/10th Sensorless Brushless System - 12T sts Aluminium shaft Racing springs (set of 4 pairs different stiffness) Alumunium steering kit (bearing) Carbon upper deck Aluminium stabilizer with 3 different bars On the price included: 4 Tamiya original drift tyres 4 HPI racing slick rubber tyres Programming card of Speed control One full box with replacement plastic parts, gears pinion- spur shafts (Almost a new complete car and tuning parts- see picture) Not included: Body cover Radio transmiter receiver Battery- charger. If you are interested you can personally check the car and its condition (perfect running condition).

scx10 axial high clearance knuckles they have been used but astill work perfectly well looking for

For sale phontom vision ... i have this for sale .i have no idea interest in these as i won it so its unwanted ...brand new in box ....collection welcome from wakefield .or can post at your cost...i will put price at