Search the Community
Showing results for tags 'Hop-Ups'.
-
FS - Proline Bulldog Truggy shells for the RC8t / Hyper ST - these have been discontinued yet can still be had from the states. In order to make the postage more efficient there's a group buy being organised, info here: http://www.msuk-forum.co.uk/topic/204327-proline-bulldog-truggy-shell-for-rc8t-st-bulk-buy/page-2 cheers
-
decided to go with a different colour set of shocks for my tt02 these are brand new al i've done is build them XD they will be sent with the remaining fluid for them =] they are usually
-
Since I converted my Savage to brushless, I've swapped a few bits out, therefore I'm selling them. IRC Savage XL 1" 6mm Low Centre of Gravity TVPS / Skid Plate and Skid plate braces -TVP's in good used condition, just cosmetic damage from stone chips and fitting to the TVP's, the braces and skid plate are brand new. You need the dog bone as they're not standard length tvps. I have the nitro engine plate for this, but I managed to snap a bolt off in it, and then I had the idea of using it as a esc mount plate for my conversion, and altered it drastically. -
Alpha Dragon .21 with matching Alpha 2090 pipe, brand new not used - not even turned over, seen no fuel so will need full break in.. 3 port little powerhouse, comes boxed as new - with venturis and stingers. I did fit this to my Serpent Truggy including pipe and flywheel/clutch as I was going to use it in there - but didn't! Specs - http://www.amain.com/alpha-a830-dragon-3-port-.21-off-road-engine-turbo-plug/p260749 -
Jetpro exhaust delivered today but it will not fit my losi dbxl because off my e start cost me 165 plus postage will sell 145 posted or swop for samba pipe
-
Guys I've got two packs (four tyres) of the Proline Blockade for sale.
-
STS .28 D28M Nitro Engine. New, bought for my .21 savage but never fitted. Pull start was removed to test roto compatibility and over time the screws have walked so buyer will need to replace. Never ran nor touched, needles should all be at factory settings but buyer's responsibility to set up correctly. These we're the budget / basher go to engine of choice for awhile. Also included a Nova Pro spare head. New, never used nor fitted. However has been stored in the shed and thus has surface corrosion as pictured. I doubt it'll cause cooling issues but it will need a good dremel polish on the base to make a good fit. I don't have any glow plugs to test threads - they look ok though but consider this head US - I don't see why cleaned up it wouldn't be fine to use for a heavy bash session where head / fin damage is possible. I want to clear
-
no longer available please close this thread
-
These were bought from Modelsport, plenty of warranty left although I don't know if the warranty is transferable. Very little use in mint condition both items. Hobbywing Quicrun 8BL150 Waterproof ESC 6s Specs here: http://www.modelsport.co.uk/hobbywing-quicrun-wp8bl150-bl-esc/rc-car-products/382834 Comes boxed with everything included as new apart from stickers Has EC5 battery connector. Price:
-
These came with my tt02 but i have zero use for them, i would like either
-
Tidy Castle Monster ESC in good working order.
-
Hi Guys, For sale are 2 x Savox 1256 Servos, 1 Leopard 2200kv Motor and a set of HPI Goliath Tyres mounted on HPI Blast Wheels. The tyres are belted so don't balloon. They are in very good condition, see photo. All items in great clean condition. Prices below include postage only, please add fees when paying by PayPal. If these are posted by tomorrow (Thursday 18th Dec) you will have them before Christmas via second class recorded. -
Hop-Ups Waterproof Vanguard ESC and Motor (from stock Axial Yeti)
Zombi posted a topic in For RC Sales
For sale, the Castle Creations-made Vanguard ESC and Motor from my Yeti as i've now upgraded. Both are waterproof, and the ESC as a BEC connector that I added on the power cable. Willing to sell both together or separately. -
for sale are a set of 1.9 RC4WD beadlock wheels they have been resprayed flat black and are pin drive and have stainless steel nuts and bolts price is
-
For sale is a brand new alloy throttle/brake linkage set, suitable for the Baja 5b, 5t and 5sc. I'm asking for
-
Hpi new elc-6s never used was a warranty replacement from hpi
-
All prices include Postage & Packaging. All items will be sent recorded delivery. First up is a brake job lot. 4 sets of SPL Pads, 2 CNC brake discs plus all the other brake cams and bits you see in the photo. The SPL Pads alone are -
bought this a while ago, and never used it so i have decided to sell, it is an alloy brace for the hpi blitz and possibly the hpi firestorm i'm only after
-
After installing my new exclusive red alum STRC gear, a second package turned up (the original STRC package sent me, believed lost). So I now have two sets of the following - see below. As you can see it's about $84 (
-
Last few bits Ss shock need rebuilding as i broke the to rear shafts not bleeding them properly after fitting new umbrella seals New shafts included
-
Unsure of brand, couple of small dents
-
Kyosho rb6 custom bodyshell painted by Kifopaint just over A month ago no splits or cracks only selling due to change of car
-
Clearing out my brushed gear to make room for brushless HH BRXL ESC and Torquemaster Pro 27t Includes Castle 10 bec which has be waterproofed with conformal coating and set to 7.4v All works perfectly, signs of use and the Esc lost it stickers and has been carbon wrapped, also the RX cable from the esc has been split, I was running the RX and servo off the Castle BEC and I used the BEC from the Esc to power my lights I'm after -
MONSTER TRUCK WHEELS N TYRES SUITE HPI SAVAGE ON 17MM HEX RIMS ARE HPI ONES AND TYRES ARE KYOSHO POSS OFF A MADFORCE IN GCD JUST NEED TO BE GLUED BETTER
-
Up for sale is a mint condition hobbywing ezrun motor, 4700kv fast and torquey, great for a SCT on 2s. Only had 2 x 2s packs run through it, only some very slight scratches to one part of it (pictured) Free heatsink too. Asking
.thumb.jpg.35b30e5fbc042f55a82e655b6c3220c0.jpg)
