Search the Community

Up for sale is a Baja 5t/5sc roll cage, complete with panels, screen netting and a bolt mod to hold the back pins securely in place. The cage has one or two battle scars but is in otherwise good used condition. I'm asking for

Hi guys, decided as I have started racing my Blitz to go back to 12mm hex. Wheels, 4 x Fastrax Tri-pin 1/8 buggy wheels, each has a row of pins cut off on the outside, one race old with loads of tread left.

Up for sale is a brand spanking new clone Baja 5b/5t rear Dominator pipe, complete with all fittings. These cost around

Blue Monkey RC Trailing arms for the Axial Wraith Im after

http://www.ebay.co.uk/itm/271856878442?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Great exhaust, small scuffs as can be seen and small dent at spring

ALL FOR SALE-- -TURTLE RACING CLUTCH SYSTEM (SMALL CRACK NEAR SCREW DOES NOT AFFECT PERFORMANCE)-

Hello, Today i have for sale a full set of Flextek arms for the savage flux. these arms are probably the most sought after and rare parts for the savage, and for good reasons too! they are literally indestructible and if you manage to break them, they have a life time warranty. im looking for

Today i have 3 2 1 Castle creations Mamba Monster waterproof esc for sale. All of these have just returned from castle as part of their warranty program so they are brand new! Im looking for

less than a month old from wheelspin and selling due to selling my sc10 roller , had 2 runs on a 4000mah 2s battery .

Hi, I have decided that as I have more ESC's than cars I'm going to to sell my LRP iX8. Its in excellent condition as you can see from the pictures and is fully working. It has only had 2 sets of battery's worth of run time. It is 6s capable although I only ran it on 4s in my S-workz race buggy. All the connections are pluggable which is very nice for maintenance/cleaning. Something else worth noting with this ESC is that it MUST be run sensored. To this end you will need a sensored can and sensor cable to make it work. The motor and battery wires have been fitted with 4mm male bullets. You can find the details on it here: https://www.lrp.cc/en/products/electronic-speed-controls/competition/brushless/produkt/ix8-brushless-regler/details/ I am not keen on switches on ESC's as in my experience they tend to be unreliable, for this reason I have removed the switch and soldered the wires together. If you wanted to you could plug in another switch very easily. There are some minor marks on the bottom of the ESC from where is was mounted on my buggy, although these are not at all visible when fitted. These are about

Selling 2 pairs (front and rear) Proline Powerstroke shocks from my Pro2 sct, they were put on the truck but never used so are in as new condition, will also throw in the various spring options I have for these as well. Looking for

FS one Torsen front or rear Diff, could be used for centre with optional spur gear (about a tenner). If you've never come across one before these are more racer than basher - as opposed to a 'normal' rc diff these put the power to the wheel with most traction so aids cornering. More suited to high grip smoother surfaces (like Astro) than loose dirt too. Used, but works as it should, removed from my Franken Hyper. Diff cups show minimal wear, bearings are good though I'd consider them a consumable item (I'd supply new ones but I'm all out currently having just done to strip and rebuilds). Asking

DE Racing front and rear skid plates Price 8quid posted a 35t spur gear for the hpi vorza price 10gbp posted include paypal fees

Roller sold I still have the losi nitro engine forsale will come with losi pipe and clutch assembly the engine is like new only been broken in was in my rtr buggy when bought it broke this in as a spare and put my engine in but never used this. Looking for

Selling this DX4S. The main casing has been painted in Tamiya purple acrylic (TS-24) and then covered in Tamiya acrylic clear coat (TS-13) to protect it. It will also come with 3x Orange RX 3ch Receivers, 1 of which has never been used, as well as the stock steering wheel and the alloy one in the picture (the stock cap got damaged when it was removed) as well as the different sized grips you see in the picture and the bind plug this also includes the manual and the box, i will also be leaving the go pro mounts on it, you may be able to remove them if needed,, you will need your own batteries though. 2 things to mention. first is the spray job is not perfect, there are 1 or 2 blemishes and the paint colour is a bit thin on the bottom curve bit, this is also a used item and there are afew marks where i've put it on the floor, these are mostly on the battery cover (which was also painted) second thing is the scroll wheel is a bit temper mental, scrolling up is fine but scrolling down will register as up if you go too fast, clicking works fine so i tihnk it just not fitted in very well, could be an easy fix if you want to take it apart. Other than that a good solid TX, i will not be splitting off the receivers. i'm asking for

Got 2 pairs of rpm arms in black. They are brand new still in package Price

As title says. Full set of parts to convert to a proper 17mm wheel hex setup allowing you to use any 17mm wheels. All brand new just missing their packets. £43 + fee posted for a full set! That's equal to: £29 for the shafts £4 for the rear axles £10 for the hexes and nuts!!!! 66479 - Universal joint shaft set lightning stadium 2 pro (8x133mm) 101061 - HPI Racing Trophy rear axle shaft 67486 - Wheel Hex Hub (Black/2pcs) x2 67492 - 17mm Wheel Nut (Black/4pcs)

Got a set of hardly used Proline Streetfighters in 2.8 size on Desperado rims with a 12mm hex for sale. They are in really good condition and great for 10th trucks on road. Price is

got this not long ago for my scx10 no longer needed as I have a difront tow hitch on my scx10 d90 would like to get my money back from it

Used only a handful of times on 2s and twice on 3s, never been hot, works as it should. Team Orion Vortex R10 Sport Brushless ESC 2-3S LiPo 60 Amp Deans Designed for brushless motors without sensor Three operating modes for all common RC cars Clean-up and linear control behavior Switched BEC Firmware can be updated via the USB port Simple programming through buttons Dust and splash proof Programmable parameters Operating mode (forward only, forward-backward) Reverse mode programmable in four performance levels Braking mode (5 Step ABS, 8 Step Drag Brake, 4 Step Initial Brake) Startup behavior ( Step 9 from soft to hard) Timing, 8 levels of protection Functions (undervoltage, overheating, loss of transmitter signal blocking of the motor)

For sale is a Jetpro v2 exhaust for the Baja 5b. As you can see from the pics, the exhaust is in great condition. It has a very small dink in it, but this in no way effects performance and is barely noticeable when the pipe is fitted. It's a great sounding pipe and looks fantastic! Priced to sell at

I have a 160A MGM up for grabs. I sent it away last year to be upgraded from a V1 to a V2 and since its been sat in a drawer waiting for a project but due to Chaser and my CNC build eating up vast amounts of money I need to let this mini beast go. It will handle upto 6s all day long spec'd with a High Voltage BEC so ideal for High power/High Voltage servos (no need to the extra faff of an external BEC). Also protected against water but not full submersion. As with other MGM's it has full data logging and a very versatile setup options which can be tweeked via the USBCOM which is also included. This would best suit a 6s powerd Monster Truck or Truggy, but would work in anything that you wanted to chuck upto 6s power in. These go over 300 Euros asking a respectable

Need to change my exhaust for something lower as I am doing a buggy conversion. This one sits too high coming out of the manifold. Don't realy want to sell it as I love this. ( great sound and performance) I would like

CPI Big Bore exhaust to fit hpi/km baja. pipe was powder coated when i got it in silver, includes header and spring as well as the blue silicone holes you see in picture the lower mount was broken and welded on by its last owner, this is at the wrong angle but otherwise it fits well, but of melted plastic from my roll cage which should scrape off) Trade for different exhaust to fit a 5b or sell for