Jonmurgie

Yeah had that advice on a FB group, will look at that... can I salvage this wheel with some glue/screws or am I "screwed"? lol

Third proper outing and the THIRD time the front left wheel has worked its way loose, this time with a nyloc and loctite!! More annoyingly this time the hex has rounded out the wheel so that’s fit for the bin 🙄 Anyone had a single spare they’re willing to sell or suggest any alternatives? Otherwise it’s a new pair for ~£35 and a lot more loctite 🙈

Added some Arrma body clip retainers to the MT10

Welcome from a fellow recent newbie 👋

I should have trusted your review 🤣 I have opened a case with them so see what they do, has useless replies from them so far, no surprise

Yep, trying to save a few ££ with eBay and now no oil means I should have just stumped up the £20 to get the proper upgrades... lesson learned

Installed a wheelie bar to youngest sons FTX Tracer, yet to be tested. Was also hoping to fit some oil filled shocks to replace the original very bouncy stock shocks but they arrived with 3 having zero oil 🙄 annoying, will order up some oil now.

From eBay but as I say they are empty apart from 1 so you’ll likely need to buy some oil too! https://www.ebay.co.uk/itm/234068297743 Piston pushed up, dry as a bone in there…

Had ordered up some "cheap" oil filled shocks for one of my boys Tracers to try out (as we all know they are hideously bouncy on the stock friction shocks) but 3 out of 4 of them arrived devoid of oil (shocker, pun intended!) 🙈 So looking to get some shock oil, what's recommended weight wise? They are also a bit long… what are others using? (links would be great!)

I guess that’s not ideal! What diff oil you replacing it with?

Defo looks better with those wheels 👍

Took the MT10 and FTX Tracer to BMX track near work for a little bash about, both did great 😝 MT10 took a right good bashing though the freshly nyloc’d wheel nuts still came loose on one side so they’ve now had a drop of threadlock added all round. Also checked the pinion gear and the grub screw was seemingly immovable so figured it’s unlikely to rattle loose 🤔 Mighty impressed with both cars but the little Tracer is insanely good for the money, it’s for my boys really and have some oil shocks on order cause the stock friction are utter pony 😂

Welcome to the fun!

Built a little bit of storage in the shed… and repaired the MT10 after a wheel came off on its first outing and lost a hex pin, swapped to nyloc nuts in the process 🙈

Post up a vid if you can, would help possibly identify the noise 👍