Madmoz7610

My guy on eBay is cheaper, and is a UK seller thank tho

These two almost ready for Sunday's rip 🤠

Save makin a new post, has anyone found a flywheel that works with stock clutch bell? Or found shoes that will fit and bite

Bought another s28 earlier, so now I have 2 s28's, a converted s28 to s50 and a proper s50 in bits 🤠 also got a bid on yet another s28 on eBay that's pretty cheap ATM so if anyone wants to outbid me carry on as the misses is kickin off that IV got too many lol

Just finished stripping a s50 I bought on eBay, thing was in a sad state and only bought it for the ball joint shafts but only 2 usable from it, on the plus side I now have a proper s50 gear box ready to go in my converted s28 when the gears finally give up 🙂 and a spare .50 motor, diffs and suspension arms the rest will go into storage as I highly doubt I'm gona bend a chassis or damage suspension holders as thes are pretty tough 🙂

Well bought a sledgehammer a few days ago as IV always wanted one and finally found one for cheap 🤠 well it's actually a s28 that's been modified with a s50 engine and some dodgy wheel hexs. IV recently give it a food service and put some 30k diff oil in the front and 50wt in the front shocks and used a slightly stiffer spring off one of my old buggys to get rid of the droop it seemed to have. Just done the rear end and found out my hinge pin holder has a crack in 1 but and completely snapped a bit off on another bit lol Put 5k oil in rear diff so have no idea how it's gona handle next time it's taken out. Will add some pictures of how it looked and how it looks now with yet more new wheels fitted an a bit of a clean

https://www.ebay.co.uk/itm/403943242685?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xzouirr0q42&sssrc=2349624&ssuid=9mfga993RLO&var=&widget_ver=artemis&media=COPY Had this kit made up for me buy a very reputable seller on eBay, guys fantastic and this price is very fair for a full set of bearings, this is a kit he's made up using the owners manual as he never heard of this truck before I asked him to make the kit so if any bearings don't fit or missing please let him know and he will do his best to rectify the issues. I'm first to buy this kit and have said I will let him know if there's any that dont fit or missing as he sells complete kits for most RCS or in this case has gone and made up this kit for me, IV used his bearings in a ftx carnage and to be fair they take a beating before needing to be replaced, also if u have any kits u need made up jus send him a msg an he will do his best to either make a kit for u. Cheers for looking and hope this helps some of u guys out looking for bearings

That is correct, didn realise when I ordered the combo that it's only meant for 2s, usually lasts about 10 mins before thermal cut out kicks in but ATM with the added fan and smaller wheels its doin good, think it helps alot puttin the 20t pinion on aswel but it's crazy fast now, flat out it's easily hittin 50mph will be strappin my phone to it tomoz an doin some speed runs

Well blew a 12t and 11t pinion on the carnage, so upgraded to a 20t and added a fan to the 5400kv motor to stop it over heating on 3s 🤠 so far temps are good, havnt had thermal shutdown on either motor or ESC 😎

Fitted a hobbywing max 10 ESC and 5400kv motor with 20t pinion and 49t spur into my ftx carnage, should definitely see over 45mph now and if the online calculator is correct I could possibly see 89/91mph

Broke a RW racing 13t pinion yesterday running the standard 2950kv etronix motor on the ezrun 60 amp esc, got to say the max10 ezrun is soo much better than the 2.1 etronix, gona be buyin a 11t pinion to run the 5400kv hobbywing motor on 3s will update what happens later if I get to run it today

Ah okies bud, IV ordered the hobbywing max10 ezrun with the 5400kv motor not realising its only a 2s motor lol will run my standard etronix motor until I either get some 2s battery's or a 4000kv motor so I can run my 3s battery's

Hi all, is anyone using the hobbywing max10 ezrun 5400kv motor/esc combo in there carnage? Jus wondering what's it like as jus ordered one

Hi bud what motor/esc combo is that?

Amazing il probably go for that one then

I thought it had a 5mm bore but havnt got one so wasn't sure if they made both sizes lol il jus stick to the crappy etronix for now and will look at doin the max10 upgrade when this motor eventually burns out 🤠

IV looked into different pinions, brother in law gave me a few but didn't really make much difference U sure the max10s are a 3.2?

I could but wanted to use these parts with a beefier motor lol, been lookin at the 60a etronix set up but not sure if its gona make that much difference

Basically want to run the rw racing pinion I'm usin on my etronix motor now on a better motor preferably on a 4s compatible motor an esc combo, looked at the max10 but my pinion gear won't fit

Hi all, Wana upgrade my brushless etronix to sumin that uses a 3.2mm pinion shaft and work with 4s lipo

Hi does anyone know if the zeee 3s 5200 mah 80c battery's are any good for the carnage? Already got a abisma 3s 4000mah 50c and it's crazy fast but want a bit more punch and a bit longer run times.. it's pretty much fully upgraded with carbon and ally and have the rw racing spur and pinion, and used to blowing diff up so bought a load of spare gears and housings for that lol jus Wana know if the zeee battery's are worth it or jus get another abisma

No probs buddy, how much u lookin for? Also can u post some pics of it please, I might be tempted myself

Well trenchers fit the rims, got some losi rock Rey rims and they look epic, bit smaller than standard but should have loads of grip an possibly make it a tiny bit quicker lol

IV tried that still no luck

Well pulled the carnage out of storage to fix the center shaft and refit the Dumbo radio gear 🤠 got some mini trenchers goin on in the next few days, for some reason I can't add pics otherwise I'd show u guys when they on