Rustypeb89

So sorry for the slow reply only just seen the reply. they are not ment to the rclab could take saddle pack but need to check the tc4 would need some filing to get rid of the cell holders but will hold lipos i think. not sure if there up for brushless but seen the tc4 brushless before but might be a strain on drive train and diffs. The rclab was great back in the day for to good for me is belt driven. don't think the company is about any more and parts seem imposable to find but there is a load of spares almost hole car enough to having it running minus electrics i think but is sold as seen would prefer to meet and let them see that one and all the spares but happy to post still. To everyone make me a offer you you will be surprised what i will except really need money. can deliver local to swaffham, kings lynn in norflk or can meet half way or post at your expense. If some one wants the tc4 i will chuck in the tc3 for free with any parts i have for it, not in great condition but could be useful i guess

Just make sure they give you the right manual i was given the rtr manual and confused me for awhile, parts are different. manuals are easily downloaded looked at online if needed tho. also check part bags which you wouldn't think have the part in seem to stick some bits in randomly. was a fairly easy build tho and any problems i had i asked on here and were all sorted quickly.

sounds good i recently got the pro kit with the .28 engine in it. its great fun and strong, not broken any thing on it yet and its been crashed plenty of times.

Getting in to off road racing so last night and so far today I have been building a Schumacher couger kf2 the builds going really welll so far and very happy with the quality. No pics yet but will try and get some later.

Bump

http://www.astramodel.cz/manualy/fusion/fusion-P-FS-POD12T.pdf is that it?

Open to offers on the TC4 and RClab 7

Took the st pro out for a bash, jumped it rolled it and crashed it a lot even went straight in to a fence post at one point, not sure how it got there. But not one thing broken so very happy with that. Also cut out and started spraying a new body shell for it I got from carpi-boy.

Haha very true, have got the bits to reinforce my body shell so will get that done instead tonight.

Think I might be slowly getting there had it running really well. In the end I had to open the idle a fraction after making it about .3mm so I could turn the throttle trim down and after the engine was up to temp I richened the HSN to about 5-5 1/2 turns and the LSN to 3 1/2. Had good acceleration and too end and dropped rpm after full throttle then held that rpm for 10-15 seconds before dropping down again. Got it all nice and muddy again so more cleaning tonight and hopefully I will get a chance to have another go over the weekend.

Schumacher Fireblade now with its new owner.

No air leaks on the engine, exhaust, fuel lines but there is a small one on the fuel tank lid still but that is cured by pushing it closed firmly not just letting it closed its self. I have also closed the idle so it's just a fraction bigger then .3mm. Will hopefully get to have a go seeing if that's helped tonight.

Thanks will give it a read before I start

Thanks agin locky, think I will go through and rule a few things out so will remove the engine then check for air leaks if there are any will fix them and check again when I'm happy there is non I will put the engine back and re check the idle gap. I have some .3mm wire so will make it a tiny little bit bigger then that so about .5mm. I will then put the needles back to stock tho in the manual it does say there both 3.75 turns out which seems a bit lean for the high end so might start that about 5 turns out and see if I can get it tuned from there. Thanks again

Yeah I think it should be too rich but if I lean it a little more it seems to hold the rpm after full throttle. Unless it holding rpm is a LSN issue? This engine is confusing me quite a bit, might try and find someone local who might be able to help me with it tho don't know anyone at the moment. But think it would be easier for someone with experience to see it in person then me trying to explain it which I don't do very well. Edit, to add when I was at your settings the performance was a lot better but seemed to be too lean as it was holding rpm and sounding buzzy after letting go of the throttle, to get rid of that I had to go this rich but now it is very boggy and rough sounding, after a couple of tanks it got up to temp I guess and did lean out. Unfortunately I wasn't able to see what it was like too much after this as I had to stop.

Had a little play after work today defiantly think that before I was playing with the needles before the engine got up to its proper temp. This time i richened it quite a lot the HSN was about 7 1/2 turns out and the LSN 3 1/2 so was very boggy to start had to put half a tank through on blocks before it would move with out bogging down and cutting out but after that I drove it around and after 2 more tanks it started leaning its self out so guessing it was getting up to temp about then? Unfortunately it was getting dark by then and had to sort the dog out so had to stop. But at least I think I know how to start the tuning now. Hoping I can get my head around it a bit more before this Sunday as hopefully going to go to a local club, unfortunately no one runs nitro there at the moment but they said I'm welcome to have a try on there 1/8th track when there not racing.

Great thanks, if you can send me your PayPal and the amount with shipping I will get that payed now.

Hi, if you have any of the 1/8th truggy shells left I'm after buying one.

I'm selling a few of my old cars. I will try and explain there condition and show it in the pics as best as I can if you have any questions or want more pics please ask. No electronics are included the ones in the pics don't work. I would prefer collection from Narborough, Norfolk so you can look at them before buying or I am happy to post tracked or by courier. I am open to offers on the prices. Payment by cash or Paypal. PM me or ask on here for any more info. Team associated TC4, This is in good condition as I quit racing soon after buying this car, I have also recently rebuilt the shocks. £70 (On hold) Fireblade evo, ok condition needs shocks and diff rebuilt also a split in diff housing tried to show in last pic, could do with new wheels/tires too. body and under shell are usable but not the best. electronics will be removed. Good for spares or to get going again. £50 (Sold) RClab 7-6.0 not the best condition probably needs a complete rebuild, chassis has a chip/ spilt shown in pics. Comes with lots of spares too many to list but has new chassis for it. don't think the company is around any more so parts might not be available. £80 Thanks for looking, any questions please ask.

Thanks, will have to check it out and get one if you have one left after I get payed on Friday. They do look very nice, nicer then the stock I think. Thats good, yeah think I will have to do that mine has cracked in places I wasn't expecting at all. But yeah has been in cold weather and been rolled a few times so not surprising really. Thanks have been having great fun with it. Ah ok that makes sense it has a lot of stress on it I guess. Will look in to that but will probably run it until it breaks or I can afford something that isn't on its limit. Would I be after something higher the 20kg or just a better quality servo like the savox?

Sorry my bad complete missed that part was searching that page for it too.

I will have a look and do my research, I was mainly wondering about the question on if i needed to put a price or not as it doesn't actually say anything in the selling rules about it just payment types so wanted to make sure before i made the post.

Like your idea, honestly don't even know what I want for them, will sort some pics out as soon as I can and go from there.

Thanks will get some pics after work and what condition they are and spares I have for them. Not expecting them to be worth anything but the longer they sit here the more I want to get them running again and just can't afford too or have the time at the moment. There is a team associated tc3 and tc4, rclab 7-6.0 and a Schumacher fireblade evo.

Hi, sorry if this is the wrong section. I'm thinking about selling my old cars, now they are old and some in not very good condition so not expecting much if anything for them but don't have a clue of there value or what to ask do is it ok to make a add with just saying make a offer for them or do I need to put a price on the add? Thanks