dye29

im in need of the pinion gear and ring gear for the losi 8ight 2.0 any ideas where I can buy please

hi can anyone tell me what oils I need please for the diffs on Neo ive been told its oil then grease .

hi all can some kind person tell me the base settings for the losi 350 nitro engine please

Any factory settings for novarossi loco please 3.5

Hello all ive just acquired a novarossi loco engine but doesn't seem to run right not even on tick over so ive fully cleaned carb fresh fuel and lines but still no good . does anyone know the factory settings for this please so I can get started at least . thanks very much

hi all first thing does anyone recommend and tyres for the RF5 as stock ones are poor , also the clutch is there different types as from new this takes ages to set off im easy on half throttle before it moves and then it doesn't move fast at all .

My bad ill try again

good evening im unsure what model losi this is if someone can help please and I would like to know the stock settings for engine .I will add another pic of buggy tomorrow . IMG_0593.HEIC

Thank you very much for advice

good evening all I have just purchased the above but don't know much about these , are these good little buggies also what size lips can I use on this .

hi all I purchased a brand new hyper 7 mach 28 early in year but from day one its a nightmare to start even though I warm the engine , so I haven't even run this in at all I just chucked in box and left it so now im starting again can anyone tell me the factory or good settings to get this thing started please thanks ste

hard to say really when I press throttle fast it will die but if I press it smooth and steady she builds up power ok

hi all ive just run in my new hyper 7 mach 28 and as im tuning when I go too press throttle fast she bogs down but top end is max screaming so I was thinking its the low end needle , ive tryed richening this another half turn in increments but still no good so then tryed leaning it same half turn in increments and still bogs any tips please I have heard these engines are crap but is it my tuning skills haha please advise

a strange on after reading loads of posts on factory settings ive put HSN to 4.5 turns out and LSN 3.5 turns out from flush and she starts and runs surely that's too much is it

Sorry ignore the pic as i had needle fully out to change oring

Hi all i aquired a hyper 7 21 nitro buggy . As ive been goin through fixing some issues i put in some 20% fresh fuel and glow plug glows thats a T8 came with it so not sure if correct or not , i then put all needles back to factory setting H 2.5 out and L flush but its a nightmare to fire up then it runs but as soon as i remove glow starter she cuts out any ideas please . i blow through fuel pipe from exhaust side until i see fuel in carb then pull away .

Hi all sorry to be a pain im really getting back in rc again love my crawler and just got a new hyper7 tq nitro and doing up a hpi savage x nitro anyway ive just purchased a NB4 transmitter kit and wondering can i use both rc from this one transmitter like have profiles if so do i need several flysky receivers i know mine came with a large one and smaller one can these be used please explain as im newbie again thanks

hi all I had loads of rc nitro cars and buggy's when I was younger a good ten years ago so didn't really have a clue with engines ect so I never ever had them running right at all so put me off until now im back and hoping it was me been dumb or are nitro cars a pain in ass to run , do you have too adjust carb every outing . how do you know what fuel too use and glow plugs I could of had it all wrong before who knows all I know they were a nightmare too start then once started 5 mins then cuts out and never starts . im fancying buying either hpi wr8 nitro or a hpi trophy if people convince me nitro is good if not electric .

hi all I had loads of rc nitro cars and buggy's when I was younger a good ten years ago so didn't really have a clue with engines ect so I never ever had them running right at all so put me off until now im back and hoping it was me been dumb or are nitro cars a pain in ass to run , do you have too adjust carb every outing . how do you know what fuel too use and glow plugs I could of had it all wrong before who knows all I know they were a nightmare too start then once started 5 mins then cuts out and never starts . im fancying buying either hpi wr8 nitro or a hpi trophy if people convince me nitro is good if not electric .

hi all ive finally fit switchblade i took out foam in boxes only downside now the led is on all time even when tranny is off aparently my receiver wont work with this im using spectrum SR310 and a spectrum DX2E can i just change receiver if so what will work

what extension lead m8

looks like ill need bigger battery box where can i get this other than usa

cheers i think i know how to fit it but just want few pics of peoples to see how they mounted it ect

hy all i have a 2ch switch blade fail safe to fit my losi dbxl but have no idea how to do this seems tricky also doesnt seem to fit in receiver box for a start please can someone help or is there a better and easyer failsafe i should have got , im using a DX2E transmitter and on the receiver the only port left is AUX i do have a Y-Lead please advise thanks

thanks guys for info i supose i need to just try her and see how she works for me , to be honest i still love my 5b but from the start i was spending money just to keep it running everything went on this ive spent £100z on it and it still looks crap. i dont mind spending money on these to upgrade to faster but not when the parts fail straight out of box .