check cable is connected to receiver? The cable on my ESC snapped in the radio box.
Info from manual about ESC and LEDs
1. During the Starting-up Pr ocess
• The RED LED keeps flashing rapidly indicating the ESC doesn’ t detect any throttle signal or the neutral thr ottle value stored on your ESC may be dif ferent from the current value stored
on the transmitter.
• The GREEN LED flashes “N/ (number of)” times indicating the num ber of LiPo cells you have connected to the ESC.
2. In Operation
• RED & GREEN LEDs die out when the thr ottle trigger is in thr ottle neutral zone.
• The RED LED tur ns on solid when your vehicle runs forwar d. The GREEN LED will also come on when pulling the thr ottle trigger to the full (100%) thr ottle endpoint.
• The RED LED tur ns on solid when you brake the vehicle, the GREEN LED will also come on when pushing the thr ottle trigger to the full brake endpoint and setting the “brake
amount/maximum brake for ce” to 100%.
• The RED LED tur ns on solid when you r everse your vehicle.
3. When Some Protection is Activated
• The RED LED flashes a short, single flash that r epeats (☆, ☆, ☆) indicating the low voltage cutof f protection is activated.
• The GREEN LED flashes a short, single flash that r epeats (☆, ☆, ☆) indicating the ESC thermal/overheat pr otection is activated.