Titaniumrc

You don't realise how much parts flex until seen in this vid, nice vid. Sent from the I6 via talktapa

Hope it goes well for you like I say I just got both TTO's in the end. Sent from the I6 via talktapa

Made a mounted and connected to the coil bolts Sent from the I6 via talktapa

Yep same has what I tried ended up packing in has it was unreliable, if you got the sensor to even stay connected (vibration unsoldered or broke the wires twice) then I'd get false readings and the telemetry was only working for around 50ft. Sent from the I6 via talktapa

Sent you a PM mate Sent from the I6 via talktapa

I always oven and freeze bearings, if this fails then the tolerance is to tight and you should abort and send them back. All well and good getting in IE forced in but clearly the spec was way off, interference fit of just 0.02 is plenty on stock sized bearings. But forcing bearings in will result in a failed bearings in no time, the case on the bearing will be putting unwanted force to the balls and then the inner race. If the bearings spin smooth and free then you maybe fine, if not then it's collapsing in on its self. Sent from the I6 via talktapa

What TX you using and sensor for revs, I did some pretty decent work on mine trying to get these to work right. In the end the TTO Rev and temp sensors was the best. Sent from the I6 via talktapa

I've not had a prob with either, but fit enclosed deffo if you run in sand. Sent from the I6 via talktapa

Just giz a Tenner all in mate Sent from the I6 via talktapa

I've got an HPI 1 same has in post 2 Sent from the I6 via talktapa

I had one and caused the engine to run way to hot for my liking, sold on eBay after just a few runs. It's also not very neat and a pain to fit spot on, it's ok fitted off the engine but don't line up to smart once fitted. Loads of air gaps so plenty of silicon is needed, also the KN style filter clogs up external and internal, remember this was just used for a few runs. Was summer and thought this be a good idea to stop grass build ups, but made it worse. Avoid. Sent from the I6 via talktapa

Mine failed after just a few weeks avoid