Titaniumrc

We push them as far as we can dan but limited in what can be achieved with the length of the grass, also running BRP's lowers COG and makes even more drag. The field I got 70.2mph on the max I'd got with a small bore on the same field was 51 if memory serves, that's a massive increase. I've been down Arron's end and actually had a race his is a 71 mine 48, and it was embarrassing tbh. Tbh mine was only getting 14k iffy coil limiting revs, but he'd have won anyway. The vids don't do justice at all Arron's just sits on its ass and it's gone ??‍♂️ Although I'm waiting for him to have a rematch down my end, then I'm sure he will get some record off road speeds because the fields plenty long enough.

My old OBR Dan was on road and 60.2 the SCZ did 62.6 on road but it's how quick you get to that speed, at the time I'd have thought it was quick but nothing compares till you've ran a big bore. Hard to explain but the big bores gets to 60 plus on grass in half the time the small bore was on road. The spot arron runs at don't help with max speed off road it spends most its time on the back wheels, I've seen it go and it's mental the vids don't do it justice. I did a road run with my smaller bore 48 ALX, and still spun the wheels well above 60 and to top that off a faulting coil. Big bores ain't for everyone but I'd never go back to a small bore unless it was a small bored twin, the smiles just from the sound of them.

Cheers for the kind words .AJ. Yeah Arron's been running BH parts for quite some time now, Spents also runs every part on his OBR twin and they're also on quite a few over seas bajas running big bores [emoji106]

Made a twin tranny plate £45

Made further tweaks to this plate more beef [emoji106] https://www.ebay.co.uk/itm/112233112671

Rear plates made these at the mo will be special order, they are 4mm and are for the TR brake mount set up. If one requires one to fit stock brake mount then this is no bother, and can be later modded by the end user if you decide to fit the TR mount. These are beefed up and based off the stock design weight comes in at 37.8g carbon stock is only 3mm and comes in at 42.6g TR rear plate 66.5g I've machined these on both sides because the pocket that's needed to clear the plastic brake hex washer, so fit and forget with no no binding washers. Ignore the steel dowels they are just used to line the part up to machine the underneath, these are also chamfered on the bottom side. Price will be £34.99 1st class signed for UK post and a lead time of 2 days.

Not to worry Scott I'm sure you'll get one when needed mate, and cheers.

Now on eBay They don't come with he sharpie highlight though

Y plates will be RRP of £23.99

Bumps away for winter rebuilds.

Sure will Scott

Front Y plates will be made to order shortly.

Shock towers will be stocked at Ian's RC spares, see post 3 10% added on 3 or more items automatically if used the basket meaning barging parts just got better.

Another Baja part got the BH-RC treatment this one offers limited warranty, search eBay for Bonehead RC

More carbon parts made to add to the BHRC range

Deffo puts the carbon to the test those heavy ass engines Arron [emoji106]

http://stores.ebay.co.uk/IANS-RC-SPARES/Bone-Head-RC-Baja-Parts-/_i.html?_fsub=13657776014 Now in stock

All done

These parts are nothing like anything else out there at this time, will only be stocked at https://www.ebay.co.uk/itm/191941345784 Check out the bonehead section on the left column will also be stocking brace below shortly. The brace will be priced at £6.99 each and come with oil filled bronze bushes.

Lol blackbone gears already mate Now the proud owner of my own personal CNC machine happy days.

To start with easy stuff like petals but gunna make things out of carbon first all in good time, first things chassis plates. Now the proud owner of my own personal CNC machine happy days.

I got mine from bajacarsuk if he don't have any in stock he maybe able to get you one in. Now the proud owner of my own personal CNC machine happy days.

Another vid Also scz reed petals are now cnc machined. CNC parts in production, now the proud owner of my own personal CNC machine happy days.

Got my revs back TTO is poorly