bigdaddy1968

If its the 2013 model 4 bolt engine like mine it should have a walbro 997 carb fitted I've had no trouble tuning mine it come way to rich from the factory

i have the km 002b the quality of the parts is good but quality control isn't that good if you buy one cheak every nut and bolt lock tight were needed and grease and oil also i was also surprised to find on the new 4 bolt engine thay now use a walbro 997 carb i've had no problems with tuning this carb

when my baja was doing that it was the low end needle was to lean put it back to factory setting a adjust it 1/16 richer at a time you might have to adjust the idle screw to tune up the idle as well

I have the Hong nor red ones in my hyper with fastrax enduro .21 brilliant clutch shoes bit like nothing esle I've used

Fastrax enduro I've got one and it is a very good engine if run in write I done 16 tanks before I started to tune

Thanks for the help he's found they use them at his work

I'm just bashing I got it because it was cheaper than a hobao rtr .21

there are a brilliant engine would recommend to any one

I'm still running it rich when I have finished this 1/2 gallon will tune it some more plus l'm running a 16 tooth clutch bell might change to a 15 or 14

I Know ive got nanda tyres on in the vid i normaly run angle spikes with the outside pins cut off but thay are worn out so need to get some new ones

Just a short vid of my hyper 7 with a fastrax enduro

Cheers mate its just he's had problems getting things from the us was hopping to find one in the UK

As in the title where can you get the o ring from

Using a hyper 7 went out last night and it goes well with the 16 on it picks up well and good top end speed

well its broke in and tuned and its fast was only using a 13 tooth clutch bell so fitted a 16 tooth today will see how it go's tomorrow night