BusyBeingBorn

Definitely way too rich lean off the LSN a fair bit also u need to check the gaskets are a tight fit

.28 will have more torque, .21 will be overall quicker

I'm sure I have one in the garage will see if I can find it for you

I also have a gtb3 with 3 receivers, 1 brand new in packet,

Engine and radio tray out, soak with GT85 and either karcher or uses compressed air. Remember to relube the wheel bearings afterwards or they won't last too long.

The one that doesn't return may have a bent shock shaft, or a bit of dirt stopping it. The other may need the seals replacing. Strip them down and rebuild them I would. There are quite a few vids in YouTube, shocks do vary but same principles.

Are front and back wheels driving the same time? If not check the grub screws in the drive shafts, if say the front grub screw is lose the back end will get all the power and the cars not designed for that.

Losi 8 definitely even if ur bashing if your plan on racing then great buggy to start with.

HPI no competition

One of my friends tried making his own shell by using 1mm polycarbonate and vacuum forming it around a shell precut. Didn't turn out too good, the poly was too thick and wouldn't form properly in te tighter spots. He tried again with 0.5mm poly and had a lot better results but still not the best quality it could be. If its a fairly basic design, no tight corners etc then I'd say vacuum forming would definitely be the best way to go. He used a product packaging one in out work which was fairly small compared to some u could prob use.

I use the bob smith tyre glue, sets instantly, can be a pain if u get it in your hands but I won't use no other

Prob either interference, faulty radio gear or low batteries in TX or rx

Bump

I have my sworkz s350 bk1 1/8 buggy for sale as a roller, will come with standard pro kit plus a few hop ups such as ally rear holder, performance bake pads and plastic chassis braces. Will come with all the kit extras, original box an original shell which is worn but useable. This car has been well looked after, raced but never bashed Also included us the pro painted shell done but ant death spiral, not a mark on it, used 2 times, has foam and heat tape in inside to protect too. She'll is a Mugen FTW. Will include a good set if wheels. Engine and servos NOT included. Engine can be bought seperately. See other add. Will listen to offered around

Ally parts are more expensive to replace once broke, they also tend to strengthen one part and weaken the next part attached

Hello and welcome, I race at a club in swansea check them out Swansearc.com

A good car. Not my preference any more as I race hence why I race an Sworkz

I have had 2 Trophys and for the price they are they are great quality, extremely good cars for bashing, much better than any hyper 7 i have compared them againt down the local bmx track. never had a single problem.

If you already have one that's working fine then keep the other as a spare

You should be able to buy the parts if there the shock cap and bottom holder in the shock. Upload a pic of the broken part

Trophys are much better than the hyper 7's

Sold!!!!!

If your tyres are going off hen try some tyre addictive, I tried some last weekend on carpet a d wow amazing like a brand new set of tyres

Any clubs open on the 30th December this Sunday indoor or outdoor 1/10 electric? Myself and a 2 others are wanting to race, most a lot if clubs are closed