hi everyone,
im currently part of a team manufacturing from scratch a rocket car which will be roughly 450mm long, and have a weight limit of 500g minimum. as part of the aerodynamics we are having fairings / a bodyshell to cover the wheels etc..
having thought about carbon fibre and fibreglass, im just wondering whether i could make a bodyshell using lexan like an rc car shell. it would be lightweight and as its not structural it can be flexy to absorb any potential impacts with a fence or somebodys foot!
has anybody made a bodyshell before? im looking at this lexan : http://www.jemodels.com/nitro-models?page=shop.product_details&flypage=flypage.tpl&product_id=7066&category_id=222
or can i get some from somewhere else in a greater quantity (ebay).?
any help appreciated. thanks
if you now have a gap in the carb of around 1.5mm on idle, and its still stalling - its either got a dragging clutch, too rich on the low speed needle, or a dud glow plug. my guess would be a dragging clutch -do the wheels spin on idle if you lift the car off the ground? - if so its the clutch
the best sealant for nitro engines is the black RTV sealant, can get it from machine mart. works a treat. i was told to use it when i had a similar issue and its the best stuff
http://www.machinema...tails/051110157
hi all,
time has come to change my SMD evo starter box wheel,
i have the wheel assembly out the box with the gear teeth and bearing assembly still attached to the rubber wheel, how do i get these off to put my new wheel on?
help appreciated, thanks