olixmb4x

righto, thanks guys, much appreciate your help. did a bit of vacuum forming at school - hopefully Uni have one to use.

hi everyone, im currently part of a team manufacturing from scratch a rocket car which will be roughly 450mm long, and have a weight limit of 500g minimum. as part of the aerodynamics we are having fairings / a bodyshell to cover the wheels etc.. having thought about carbon fibre and fibreglass, im just wondering whether i could make a bodyshell using lexan like an rc car shell. it would be lightweight and as its not structural it can be flexy to absorb any potential impacts with a fence or somebodys foot! has anybody made a bodyshell before? im looking at this lexan : http://www.jemodels.com/nitro-models?page=shop.product_details&flypage=flypage.tpl&product_id=7066&category_id=222 or can i get some from somewhere else in a greater quantity (ebay).? any help appreciated. thanks

as above really, want to replace a couple of tips just wondering if the HUDY ones will work with the fastrax team tools thanks

if you now have a gap in the carb of around 1.5mm on idle, and its still stalling - its either got a dragging clutch, too rich on the low speed needle, or a dud glow plug. my guess would be a dragging clutch -do the wheels spin on idle if you lift the car off the ground? - if so its the clutch

yay or nay? i beleive its similar / same as acetone but want to make sure! thanks

threadlock should be used on the engine mount screws, and only a small amount on the clutch bell - if it gets stuck you will be in trouble!

the best sealant for nitro engines is the black RTV sealant, can get it from machine mart. works a treat. i was told to use it when i had a similar issue and its the best stuff http://www.machinema...tails/051110157

sorry have been busy and havnt had chance to reply till now, still for sale if interested

bump

hi all, time has come to change my SMD evo starter box wheel, i have the wheel assembly out the box with the gear teeth and bearing assembly still attached to the rubber wheel, how do i get these off to put my new wheel on? help appreciated, thanks

bump

pm'd, bump,

PRICE DROPPED !!!

bump

bump

bump

make it 35 posted and its yours mate

BUMP, make an offer!

hi, here i am selling this Acoms technisport DSSS 2.4ghz system, which includes the transmitter, micro reciever, instruction booklet and original box / packaging. cracking radio ideal for uprgrading to 2.4GHz, it is in excellent condition, all in working order, just add AA batteries. Features: LCD Display 10 Model Memory Steering Rate Adjustment Throttle Trim Lever Steering and Throttle ATV Servo Reverse Low Battery Alarm Micro 3-channel* receiver Built in fail-safe i am after

hi all, im thinking of getting a new radio because my current one seems to have poor range / looses signal too often, which is costing me when racing - (often just have to pull out of the race in fear of crashing into somebody uncontrollably) so i have been offered a Dx3C, a lot of the guys i race with use spekky but the dx3r and dx3s which are rather pricey for me. just wondering are they any good, and will i end up experiencing similar range problems, what other radio should i consider, max

will be sometime end of this month / early march. only the team drivers have theirs at the min, pre orders being taken at JE spares

'sway bar' is what the americans call anti roll bars, as the name suggests it resists roll of the car through corners, effectively connecting the two sides of the car, limiting the amount of suspension travel when the weight transfers to one side through corners. worth having

yes Sold to Budgetblown, thanks

im selling these wheels / tyres because i have no use for them, but im sure someone will! they are Medial pro tarmac II wheels and tyre. plenty of tread on them, look like they have been used for about 10 minutes. wheels in excellent condition