Jump to content

scotty1986

Members
 View Profile  See their activity

  • Posts

    2,399

  • Joined

  • Last visited

 Content Type 

Everything posted by scotty1986

  1. scotty1986
    hi all ive been offered a losi lst2 brushless converted roller for my 8 eu roller,, now ive always been a sucker for the huge shocks ,, big wheels and a wing so im tempted the lst2 also has blue alloy diff cases ,, rpm arms all round etc so has a few bits done to it ,, now by the pics he sent me sent me it looks like its still has a brake servo in there so im guessing it has mechanical brakes on it ,, how would i go about removing these and using the motor and esc braking and reverse??? also how would i go about running a single servo as im guessing they run double servos like the lst1?? i should be going to have a look at it at some point today but just needed answers to these first tia
  2. scotty1986
    bump
  3. scotty1986
    bump
  4. scotty1986
    not sure on value so ill just say
  5. scotty1986
    also if you have batterys to go with the flux i have 2 6600mah 60-120c turnigy hardcase that can go with the losi
  6. scotty1986
    losi 8 eu brushless castle mamba esc hobbywing 2000kv motor ,, new bitty shell and wing etc in the fs section for trade bud
  7. scotty1986
    interested in a trade roller for roller ive got a losi 8b 2.0 eu brushless ive just put on here
  8. scotty1986
    hi all decided buggys aint for me so its going ,, its a losi 8 eu 2.0 i brought from a racer ,, i have ran it twice at my local track (ndor) and i just find the buggys too sharp for my driving skills so im after a truggy or may even go for a truck either must be brushless ,, any way its full eu spec with added alloy castor blocks and spindles,,proline wheels with losi stepstud tires in decent condition,, brand new unrun bitty design shell,, brand new unrun bitty design wing,, electrics wise it has a ace ds1015 on the steering,, castle mamba monster esc,, hobbywing 2000kv motor ,,, its got a metal 45t spur gear instead of the plastic one that comes with the conversion kit,,, its also got a spare set of trimmed minipins and a well used proline shell,, im looking to trade this either artr for artr or as roller for roller,, im only interested in electric and nothing smaller than 1/8 ideally id like a decent truggy roller or maybe even a lst2 electric roller ,, all i can say is try me ,, im based in derby but could meet within a sensible distance
  9. scotty1986

    tried my losi 8 e brushless on the track last week and wasnt really keen on buggys,, ive been offered a hyper st pro brushless roller in mint condition on a trade for my 8b roller ,, will the hyper be any good round the track?? im no pro driver at all ,, i know the st is a great basher but not sure about the track

    1. jordan_bench10

      jordan_bench10

      Theyre actually quite competive set up right mate

    2. RCbutcher

      RCbutcher

      Come collect my losi 8t lol its got some issues but can be sorted. Put your losi bl stuff on it and the nitro parts on the 8b

  10. scotty1986

    tried my losi 8 e brushless on the track last week and wasnt really keen on buggys,, ive been offered a hyper st pro brushless roller in mint condition on a trade for my 8b roller ,, will the hyper be any good round the track?? im no pro driver at all ,, i know the st is a great basher but not sure about the track

  11. scotty1986

    tried my losi 8 e brushless on the track last week and wasnt really keen on buggys,, ive been offered a hyper st pro brushless roller in mint condition on a trade for my 8b roller ,, will the hyper be any good round the track?? im no pro driver at all ,, i know the st is a great basher but not sure about the track

  12. scotty1986
    http://www.ebay.com/itm/GO-Nitro-Engine-20-for-TRAXXAS-REVO-3-3-T-Maxx-Jato-4-Tec-Slayer-Pro/171433927070?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29947%26meid%3D08c42112b0a047f3b23e94c8723a69c5%26pid%3D100011%26rk%3D1%26rkt%3D1%26mehot%3Dpp%26sd%3D151580965387 there is also these the go .20 engine ,, not checked for reviews though but going by the go engines i had in the past i.e go.28 and go gx5r there decent mills bud
  13. scotty1986
    who did you buy it off bud
  14. scotty1986
    only a lil 1.6 bud but goes round the bends pretty well for a 7 seater
  15. scotty1986
    my little bus, few little mods,, i.e tinted back lights ,, debadged rear end ,, debadged grill,, subtle backbox,, vectra phase 2 gsi wheels,, coilovers,, irmscher side moulding badges
  16. scotty1986

    are 4mm bullets ok on a 150a combo,, ordered some batterys on hobbyking and they come with 4mm bullets but before i buy some bullets for my esc and charger wire just thought id ask on here or will it be better to go to xt60 or xt90 or deans

    1. Show previous comments  3 more
    2. HYPER-BOY

      HYPER-BOY

      Should be ok for 4S ?

    3. Oh How Original

      Oh How Original

      After 5mm bullets it won't make much odds unless you're running 8s+

    4. capri-boy

      capri-boy

      Xt's just make it near impossible to short them Scott - each to there own there - I prefer straight bullets now, for neatness, and just ensure that the batt/esc leads are complimentary lengths so makes it harder to make a mistake.

  17. scotty1986
    just brought 2 new 6600mah 4s 60-120c hardcase for 97 new bud
  18. scotty1986

    anyone know a discount code for hobbyking ?? i want to order a couple of lipos but it comes to near enough

    1. Show previous comments  23 more
    2. scotty1986

      scotty1986

      http://www.hobbyking.com/hobbyking/store/__52396__Turnigy_6600mAh_4S_14_8v_60C_Hardcase_Pack_UK_Warehouse_.html
    3. scotty1986

      scotty1986

      sorry it 2 of these im after http://www.hobbyking.com/hobbyking/store/__52401__Turnigy_6400mAh_4S_14_8V_60C_Hardcase_Pack_Removable_Leads_UK_Warehouse_.html

    4. HYPER-BOY

      HYPER-BOY

      Think there is something wrong with the site, i tried it and got errors.. Try later, no way postage should be that much

  19. scotty1986
    thanks bud
  20. scotty1986
    planning to run at the track bud so not sure if i need hardcase or if i can run softcase
  21. scotty1986
    as above to use with a 150a combo cheers
  22. scotty1986

    whats the going rate for a losi 8b 2.0 brushless roller with a few hopups I.e alloy spindles and camber blocks etc decent shell and wheels

    1. Show previous comments  6 more
    2. scotty1986

      scotty1986

      funny guy i might keep it for 2 weeks lol

    3. Oh How Original

      Oh How Original

      Put me down for dibs in two weeks then lol.

    4. Cambergang

      Cambergang

      I'll give u 120 now If it's decent condition

  23. scotty1986
    sold please lock
  24. scotty1986

    please close

    scotty1986 replied to scotty1986's topic in Wanted

    bump
  25. scotty1986
    inboxed you
×
×
  • Create New...