scotty1986

first is a xtm monster gt

bump

hi all got this savage flux 1/5 roller for sale alza 1/5 5b style chassis with roof and skidplate also got the alza lip tray fitted and a 1/5 losi servo for the steering,, rpm arms all round alza hinge pin braces front and rear integy tie rod deletes xl extended axles with hyper 17mm hexs bitty design wing proline wheels with max mulcher tyres irc v1 shocks (4mm shaft but all alloy i.e shock tops,, bodies and spring perches with irc mounting kit integy alloy shock towers had to extend a couple of the shock mounting holes to fit the irc shock mounts will come with the servo in and a bag of diff spares,, a few plastics,, couple of spare rpm arms ,, 2.4g 4 ch radio gear,, 2x 3s floureon softcase 5500mah lipos only had 1 charge and alloy front hubs and cblocks ,, and a set of losi xxl wheels with 20mm hexs to fit them £260 collected from derby

losi lee palmer on fb makes panel kits mate give him a search

yes bud pm me

hi all ,, gonna sell my savage flux 1/5 as decided i need a second car for my as my zafira sri seems to be picking damage up going down the a38 and back and also in the work car park by careless idiots chucking nails!! (i work in a pallet yard) yesterday from nowhere ive got about 8 chips on my wing look like there from nails,, so im wanting to buy a old land rover discovery ,, as i can insure one on a classic policy for about 150 for the year plus do a bit of off roading with my brother,, so i need help deciding what my rc is worth?? ill give a run down of specs below alza 1/5 chassis 1/5 servo rpm arms all round alloy rear tie rod deletes ally front c hubs and castor blocks alza hingepin holders irc v1 shocks (4mm shaft ) with mounting kit steel spur gear alloy slipper locker bitty design wing hobbywing quicrun 150a waterproof esc traxxas branded castle motor 2000kv 20mm hexs with losi xxl wheels savage xl extended axles will come rtr with following 2 spare upper rpm arms,, 1 lower rpm arm spare plastic fron c hubs and castor bloxs original axles ,, about 8 spare driveshafts ,, plus 1 extended driveshaft (alza) bag of diff bits few plastics i.e shock tower diff case etc 2x3s 5500mah lipos (1 charge old) 4 ch 2.4 ghz radio gear and thats about it heres a few pics cheers

got 16/44 on mine on losi xxl wheels and tbh it wasnt as fast as i wanted , motor esc and lipos were still cool after 10 mins runtime on grass longer than the grass in the your pic heres mine

brought the same ones as you have fitted mate

that will just make the issue worse bud ,, the top is fine just bottom needs to sit further out

hi all im after a few bits to finish my savage build if anyone can help,, 1x savage body mount,, 1 x rx box the smaller the better,, x4 shock standoffs around 5-8mm .. and either a flourescent yellow spoiler or black spoiler 1/8

be rude not to stick a couple of pics up of it though,, did irc do v1 shock for the savage as these are pretty much identical bar not having the 8mm shaft ,, alloy top caps,, alloy body ,, alloy spring perches etc

mine ar like a two prong fork

my lower mounts are different bud

hi all im in the process of building my 1/5 savage ive fitted some shocks what i think are irc v1s or lst,, ive redrilled my alloy towers as the irc top mounts wouldnt line up with existing holes and there fine,, the issue im having is with the lower shock mounts and the rpm arms,, obviously the irc lower shock mounts dont fit with the rpm arms,, so when fitting without them its bending the shocks inwards and pushing them against the lower arms,, so wondering the best way to rectify this?? was thinking some shock standoffs,, but not sure ,,, is anyone else running irc shocks with rpm arms?? if so what was your solution??

just received my 1/5 savage project today,, wheels,, have been ordered ,, hexs and spacers for the xl axles,, caustic soda to deanodise bits,, rit dye to get rid of the purple rpms,, brought a st of all alloy losi lst shocks and irc mounting kit,, some shock socks,, just need to find time to strip it and do it all,, cant wait to see vids of yours on 6s bud ,, its looking nice

so its got 4 beast modes but its missing the only one we all want ,, (the hold my beer and watch this mode)

Hi all looking for some 17mm hexs for a savage flux , ideally ones that dont have a ugly nut to hold them on , would be interested in onescthat would make the truck a bit wider too

You wouldnt believe ive had about 6 savages in the past on my last flux i remember fitting 23mm hexs and the nut that held them on sat inside the hex and i still used a enclosed nut , where as if i used 17mm hecs tje same way i wouldnt be able to ise a enclosed nut as the nut holding the hex would be outside due to it being too big to fit inside the 17mm hex is that right?? I obviously dont want it to look like a bodge with a small nut showing

My bad i thought savage axles was 8mm , was i right in thinking there is 2 different axles ?? One with a grub screw to hold the pin and normal axle with

yeah ive brought some proline full offset wheels with maxx mulcher tires ,, to add more width just wanted to add a bit more tbh ,, ive got most the stuff to build the savage up as ive been out the hobby for a good 10 months now but sice buying the savage i brought the leccys for it and radio gear,, brought wheels,, brought tools,, just need to order lipos and a charger and wheels hexs

are they the only options?? would the ones in the link not work bud??

i put on the post im not wanting hot racing ones bud,, i had some on a flux before before and still stripped a wheel and it also took the edges off the hex to so they wasnt much good after so looking for a alternative tbh plus the hot racing are only about a 5mm extension aint they mate??

hi all ,, after some info if anyone can help,, i brought the 1/5 alza project from the fs section a few days ago and should be here monday,, ive ordered some 17mm hex wheels ,, but now i need hexs for it,, i want proper hexs not the hpi set with the flanged 6mm nut or whatever size is it,, ideally id like to add a bit more width if possible,, now ive been looking about and from wht ive seen there is 2 different stub axles on the savages and im not sure what are on this one as the chap has now removed the pics etc from the listing,, the only thing i do know is he offered me a set of baja wheels and the hexs he ran on it for extra cash but i wanted to run 8th wheels and tires due to less strain on the diffs etc,,, so going by the fact he had baja conversions on it,, what proper 17mm hex kit would fit straight on??not interested in hot racing ones as had them on a old flux and i didnt rate them tbh ,, ive found some on blacksmitch products,, not sure if they will work but ill put the link on here at the end so iff you have any suggestions that would be great,, thanks in advance http://www.blacksmithproducts.co.uk/products.asp?cat=243&pg=7 its the black ones im looking at getting with the 2.5mm pin i believe thats the right size for a savage axle ,, please correct me if im wrong

still for sale mate?

is that £15 all in with fees etc ??