rsremco

Yeah i don't like the carbon tower too, thats why i use the alu D8T one I still use the original CVD and dogebone,s all around. Luckly no problems with poping out or anything. When they wear out i will replace them with D8T Tessmanns. Just because i like the looks of them :-)

thanks for the tips, i found it out! i use imgur and with the copy link it doenst copy the .JPG part. so just added that and it work

I,m always looking in this topic for tips and tricks so thank you guys! Now i am almost finisht with mine i think i,m going to put up some pictures Front, with D8T Arms, shocks and tower D8T Tessmann knuckles and hub Rear with Tessmann shocks, D8T tower, arms and suspension holder Tessmann Servo saver, i neded this one because a bent the chassis a little for the D8T pivot plate, and the TT one jams against the diff housing D8T Suspension holder, screwt down to the chassis. (old photo TT servo saver still here :-D ) I put D8T Arms all around, D8T Tessmann Hubs and steering knuckles, D8T Shocktowers, Front D8T Bigbore shocks Rear Tessmann shocks, D8T Tessmann servosaver, D8T Suspension holders and pivotplates. Xerun 150A Esc and 2200KV sensored motor. I am verry happy with how it handles and the power on 4S is great with this motor. I bent the front of the chassis a little bit to fit the D8T suspension holder, it has a different angle. And i drilled two holes to bolt the suspension holder to the chassis. Also replaces the 2 long screws going tru the diff housing with 4mm Hex screws, mutch better!

Get the correct size screwdriver, i have no problems with mij screws and i have taken it appart many many times only the correct size screwdriver wil not strip screws

So i have been bussy this weekend, after a lot of reading and searching with google i made a bell crank servo saver on my bullet, (Sorry dor the bad pictures, my phone sucks) Only like to have the servo saver in alu, so more searching to do It seems to word perfect :-D

If someone want's 17mm hex wheel u can use these 17mm Hex They fit a mt2 and this uses a 5mm shaft zo it will fit the bullet.

has anyone already fitted the swaybars from the Lightning buggy on his bullet, or the Center diff? And so does the cornering gets any better with the swaybars?