Toxic Basher

Spectrum sr3000 receivers. Just tested in garden and bind and work perfect. One has slight knock in wire so £15 posted that one and £18 posted the other Hi tech servo. Fully working as should, not seen much use £18 all in. Next up two nano tech lipos 2s 5300mah 50-100c hard case. Not had a great deal of use battery connectors look to have slightly warped on the + side but doesn't affect in any way. I'll take £30 the pair all in. There £25 each on hobbyking. Next we have well used badlands on vorza rims. Still som life left £14 all in. And the proline bead locks, not sure what hex but it's big 23-24mm not sure sadly lost the screws but may find them soon, I only bought them for the tyres so no use to me no idea on price for these so say £20 all in if I'm way off let me know Lastly for now a dynamite wheel balancer and a centre diff from a Lodi lst I think with an alloy hot racing diff case £25 all in for the balancer and £15 the diff Sent from my iPhone using Tapatalk

I built this over the last six months with the intention of building a bulletproof vorza I could really thrash, the vorza is incredibly tough anyway but after owning around 4/5 vorzas I'd definitely seen some weak areas that needed sorting so that's how this build got started. Firstly the shock towers will nearly always buckle after a lot of heavy use so I've fitted two shock towers front and back, now it should stand up to 99% of abuse, next the front hinge pin holder, this always snaps on stock vorzas so the hotbodies aluminium upgrade part fits nice, is twice as thick as the stock part and I've never snapped one yet, it's normally the first thing I'd upgrade on the vorza. Next the t bone bumpers, an excellent upgrade and provide lots of protection, I also fitted d8 alloy hubs front and rear, no more snapped hubs, titanium turnbuckles front and rear, the front steering plate and chassis brace are also alloy, diffs are from a hotbodies d8, centre diff has the hardened and lightened spur gear and the d8 lightened wheel hexes, also the front and centre diff have the lightened diff outputs fitted. Various new plastics fitted including new wing mounts, new battery box, new steering assembly, new centre diff mounts and new servo/Rx box with some used but good condition bits, there's a few bits that don't look the best aesthetics wise but perform as they should. The savox sc 0252mg takes care of steering, still have the box for servo so will include that, the esc is a brand new mamba monster 1, unsoldered and was a replacement from castle, I took the lower half of the case from it for another esc so it's only got a top half of the case, I've mounted it on some foam and fitted it to chassis but really it needs the rest of the case before I'd run it. The motors the trusty castle 2200kv motor, used in a few rides and works flawlessly although it does have a dent in the side (see pic) it doesn't affect it at all, I've fully tested the motor and servo but obviously not the esc as I don't want to solder it up. The motor mounts been dremmeled to allow the motor to fit, it's fitted ok but could use some more dremmel action to provide a better fit or just swap it for a flux torq motor with someone [emoji1303] Its rolling on proline step ups barely used on kyosho green rims. Sadly don't think I have a body shell, tons of spares though including lots of d8 lightened bits and spare used alloy hubs etc, new spiral crown gears, steering assembly, hubs plus a spare set of new shock towers. All in all there's a fair bit of kit, it needs some work to finish but should be an awesome ride when it's complete and should be one of the strongest vorzas on the planet [emoji1] Anyway pics and lots of them Any questions just ask. Price is £400 all in, that's fully insured delivery to your door and all PayPal fees covered etc, obviously I'd do it cheaper for cash on collection, can meet anywhere near Liverpool, Warrington etc Sent from my iPhone using Tapatalk

I think it's clear he's talking about someone else hemi [emoji106] we know your a good guy [emoji41] Sent from my iPhone using Tapatalk

Ive possibly got a savox servo id swap for the amplifier. I've got other bits to add to sweeten deal [emoji1] I'll check shed tomorrow and report back with more info. Sent from my iPhone using Tapatalk

I ordered Cree led bulbs and the wrong type came plus one was defective, basically just refunded me for the defective bulb and wouldn't do anything with the others unless I returned them at my cost. I won't be using them again. Some of the bulbs actually started to melt so all got binned, lesson learnt. Sent from my iPhone using Tapatalk

Where they the ones we ordered as a group on this forum ?? We all grouped together a while ago and had 20 sets made with a custom offset. Pretty sure it's these wheels, I'll check against mine when I'm home. If they are there a one off wheel and only 20 sets exist Sent from my iPhone using Tapatalk

I found 18t to be a little bit much on my xl'd flux with the huge wheels. Extremely fast but temps ran a bit on the hot side for me. Sent from my iPhone using Tapatalk

I'd start low around 14t/15t if poss the big wheels are like gearing up a tooth or two so I'd definitely start low. Check temps then adjust gearing. If you need to borrow a load of pinions to try I'll send you a load then just return them when your done Sent from my iPhone using Tapatalk

Yep a a lot of members are not very active myself included. Fell out of love with rcs and found climbing rocks lol Couldn't sell everything though:) Sent from my iPhone using Tapatalk

I've still got your old soldering station and your tool pouch with tools Funny how the cycle goes. Considered selling everything myself but just couldn't do it. Sent from my iPhone using Tapatalk

I used a vorza diff for mine but just because it was spare. It's got the lightened internals and has performed perfect. No idea what size spur gear I've got on it though. Sent from my iPhone using Tapatalk

Badlands step ups and balancer left. Don't be shy make an offer Sent from my iPhone using Tapatalk

Check out the documentary called dubai's secret slaves. They might be the richest but there also killing people daily to build the place. And I'd back China any day. Nearly 1.5 billion population vs 250 million in Dubai. Sent from my iPhone using Tapatalk

The post won Easily fixed. Sent from my iPhone using Tapatalk

Bump. Badlands step ups and balancer left. Sent from my iPhone using Tapatalk

Road rage sold:) Sent from my iPhone using Tapatalk

Nandas have sold sorry bud. Everything else still available Sent from my iPhone using Tapatalk

Okay folks nearly sold all my 1/8 buggy stuff but have four sets of wheels and tyres to sell plus a dynamite wheel balancer. All wheels and the balancer are 17mm hex First off proline road rage. Had some use but not much. Fitted to red 5 spoke wheels and mounted on a nice tire stick holder thingy also included. These are £32 from Modelsport not including wheels so I'll take £20 plus postage. I'll cover fees. Next up the nanda blocks brand new mounted on black dish rims with orange de racing stickers on. Also mounted on a de racing tyre holder spike these are around 20 new so I'll take £12.50 plus postage I'll cover fees. Next up the proline step ups mounted on kyosho rims. Also has a home brew holder included. Used a couple of times on grass so there practically like new but have had one set of the lugs cut on two wheels to aid handling. The wheels are used before but all good except one gauge out the back, see pic. These are around £26 for a set of 4 tyres without wheels so I'll ask £14 plus postage and I'll cover fees. Lastly for wheels. Used proline badlands. Seen some nice usage. May need a dab of glue here and there but lots of life left in them. Comes with a de racing tyre holder stick thingy also. £10 plus postage I'll cover fees. Lastly dynamite wheel balancer. This cost me nearly £50 and I've probably balanced 3 sets of wheels in two years lol can't see me using it much so time to go. The c clip holding the shaft has a few tiny rust spots from being left in the shed but it's a 10p clip and easily changed. And it's a bit dusty but other than that it's near perfect. I'll take £32 plus postage and I'll cover fees Sent from my iPhone using Tapatalk

Hmmm works for me but just takes a min to load using tapatalk app. I'll upload to YouTube and try again. Sent from my iPhone using Tapatalk

https://vimeo.com/157055893 I decided to blow the dust off my old savage flux and get it out for a quick bash. Filmed by my 4 year old son. And he's not a bad little camera man [emoji1] Sent from my iPhone using Tapatalk

I was going rock climbing:) I've tried looking in the shed but unfortunately I've started digging for my new shed so everything's piled up in the shed and the boxes of vorza stuff are at the back Sent from my iPhone using Tapatalk

Tug this has been around a good while. Read it myself years ago. Sent from my iPhone using Tapatalk

Ill have a check tomorrow bud ( off climbing now) definitely got at least 3 steel ones in shed Sent from my iPhone using Tapatalk

Tekno chassis kit sold to jbolton. Cheers bud Sent from my iPhone using Tapatalk

Just pm'd you bud. Been out for valentines with the Mrs If I don't reply I'm errrr busy Sent from my iPhone using Tapatalk