How much for the red alloy (?) fan cover and silver Flm front shock tower with the silver uprights??
Thanks
Also: what wheels/tyres are they? 5b/5t?? Fronts? Rears?
Looks like these Tim
http://www.freeprawnracing.co.uk/hollow-point-rc-high-strength-exhaust-studs-35mm.html
Just undo the nut and the vrc pipe header should slide off the threaded bolts mate, if not you can use an alarm key in the end of a bolt and slowly back it out
You may need the baja brothers side pipe mount or the kraken side pipe mount?
http://abbotsrc.co.uk/Kraken-RC-Roll-Cage-Side-Pipe-Bracket-for-VRC-Pro-Side-Pipes-P5204903.aspx
Get a hole saw and drill out your plastic gear cover then get some Perspex and glue/fix inside! Job done and cheap!
Python made/make some nice bling gear covers tho
I did buy them and a few other bits, not recieved them yet as they was away on their holidays for a week, lol
They've sent me tracking nos: so should be here in next few days
Or team hoonage (pricey tho) http://shop.teamhoonage.com/losi-5ive-performance-parts/losi-desert-buggy-xl-driveshaft.html
Rcmk use a similar design coupling (same as losi 5t design) and should be in UK soon
Millpond models should have some Rcmk parts in stock very soon, been speaking to him on facebook about the drivetrain! Prices are not too bad tbh but nobody knows is anything will fit Losi dbxl yet!
Well surely the mx g290 will be better then a stock g290? But more money but gotta be worth it mate!
What I did was found a cheap stock g320 that's a few tanks old so that's now going in my dbxl and I'll probably have to upgrade drivetrain ect now tho!
27cc is great in a dbxl too! All depends what you want out of it and all that stuff lol
If you get white rpm arms to dye them, make sure you test fit them 1st as you may need to Dremel a little bit off the bottom rears mate! Some ppl dye them then fit and have to cut the arms looool
Those filters are just magnets that act like ferrite rings!!
Wrap a magnet around the killswitch wires up close to the coil/onboard engine killswitch as you can, then test the range/glitching ect
Assuming you have any magnets spare that is lol
Decision on what engine to put in what car was made easier tonight as I just picked up another g320 lol
30.5 pro mx will go on the baja and both losi's will now get a stock g320 :-D
Cheers guys!
I have both engines and can't decide which vehicle(s) to put them in pmsl!
Think I'm going to put the stock 32 in the losi 5t and 30.5 pro mx in the baja 5t and keep my 27 fm in the dbxl lol
Freeprawn sell a bottom end machined with the +2mm stroker and they sell the modified top end kit so you can make a 34cc. I think they sell both parts for to make a 32cc but no longblock yet!