welshiemaxbash

Hi mate, only just seen this sorry, Lipo is brand new boxed Not sure what there worth at all Message me?

Hey, got some bits from a family member, not needed by me at all. Open to offers as not a clue what there worth. 1. Bionic battery lipo 2. Tc4 carbon kit (31042)

Due to some circumstances that have come up, i need to free up some cash, i started this conversion a few months ago and have sunk some decent money into it, its never been run as i don't have batteries. I have replaced the chassis to a new black one, new 2200kv motor, new 150a esc, this on a 4s would fly, Losi EU shock tower, green springs, Couple other ally upgrades, its fitted with new proline badlands as new, proline wheels, proline shell, the shocks have been serviced, it comes with losi spektrum 2.4ghz radio gear, hi torque steering servo, new charge. i have the boxes for the combo, they have never been run like most things. as i can see itll only need a few batterys to get it running. Im sure you will enjoy the car. Comes with a fair few spares ill throw in also. Any questions fire me a message! Thanks Im looking for £250 but i'm listening too offers so don't hesitate to fire me a message with a offer i will listen.

Cheers matey, looking forward to seeing yours get going!

So today my conversion kit came, thanks to @Oh How Original for the link to that aswell as all the help. The kit was pretty much straight forward, was really nice as it covered all the holes in the bottom of the chassis. Only part i struggled with was replacing the pinion in the centre drive shaft but i had a quick googled and managed to find a little tutorial on another thread. So if anyone else is struggling here is a step by step to changing it. So for now, we will trust in Losi that I need to change the nitro spur gear (48) for the electric one (45). To do this it's pretty simple 1. Take the centre diff you removed and identify 4 screws holding on the spur 2. Take those off and remove the spur (being careful not to spill diff oil everywere 3. Carefully remove the diff gear on the inside of the spur to uncover a pin. Use something flat to help leverage this off if you need to 4. Now take the pin out and remove the shim if there is one. 5. Slide out the drive cup and remove the blue gasket and orange rubber seal. You can reuse these if like mine its pretty new 6. Take the new spur gear and note that it comes in two parts. A centre piece that slips into the spur gear 7. Put the gaskets in as they came out and slide the drive cup back through. Add the shim and and pop the pin back through to hold it together 8. Put the diff gear back over the pin and carefully place it back on and put the 4 screws in. It might make sense to add a tiny drop of loctite for this. So thats it. Thanks to member - @evilhomer for his guide back in 2015! Now time to wait for my Motor and ESC, then just need to pick up some packs and a charger Picks to follow.

Looking to upgrade/repair the shocks on my e8ight truggy the shocks on it now the caps have ovaled and are leaking fluid aswell as rattling Was wondering what other shocks fit on these truggys for bashing? or maybe repair?

cheers dude, i will take a loook into them! thanks

Yeah i got the standard shocks, but the tops have ovaled so they rattle really bad. going to upgrade i think. Its mainly going to be for bashing so want them quite solid. Hobbywing it is

Yes mate Eu shock towers was looking for one of these for soooo long! also looking for some new shocks? any idea on some that wont skint mee? yeah i think MAX8 is the best bet also :)D

Thought id start a thread for my current build a losi 8ight - brushless conversion, I have never done a brushless conversion before so i can get help and ideas along the way. So It started out i managed to pick a car that i have wanted for so long for such a bargain price, my Losi 8ight 2.0 truggy , I managed to get it on Facebook market place for £80 + £20 Postage. BARGAIN.Brought it as a previous nitro track race car. it had a alpha pro plus z852 engine with a Ryan Luts pipe(currently selling these) I whipped that straight out and cleaned some of the parts up and stuck it onto the new chassis that he also threw in, SO my plans are so far to order the losi conversion kit, but im currently stuck with what combo to go for either the MAX8 or the Arrma BLX 185? what are peoples opinions with each of these, i think i may use just on 4s? maybe 6s? i have also been told to upgrade to a metal spur gear. Any help is greatly appreciated. Bye for now! Pics attached below!

Looking to sell/swap my Alpha pro plys z852 race engine with efra 2106 Ryan Luts exhaust system, the engine is boxed with spares and in great condition as you can tell from the photos! I got it on a race tuned car but haven't ran it in my ownership as i am wanting to go brushless Looking to either sell or swap for a brushless 1/8th 4s combo Im asking for £100 as this is what the rough price they seem to be going for on there own without a pipe around ebay/facebook pages, so im completely open to swaps/cash offers Message me for more photos and info

I wouldn’t know how many gallons it’s ran. It’s boxed And no marks on the head

Just brought a Losi Truggy with one of these engines fitted was just wondering if i'm able to fit a Pull start to it rather then the bump box? Researched but cant seem to find anything about it Also wondering what its worth with a EFRA 2107 exhaust as im thinking swapping to Brushless at some point Any help will be much appreciated! Thanks

Looking to buy a combo for my losi 8ight truggy Been looking at the GoolRC esc and motors Worth the money or not? What would you advise? Thanks

Here i am selling my Losi 8ight 2.0 Buggy race spec I brought this a couple of week ago with the aim of using it, but managed to grab myself the truggy i wanted. Seller before me has fitted a brand new engine ( bump box) so itll need running in from new. Requires Radio gear and bump box to run as its a race spec buggy, the car itself is in great condition and looks great, What you see in the photos is what you get. Loads and loads of spares, spare chassis, servo trays, arms, knuckles, bolts, shells, itll keep you bashing for a fair while. Any questions dont hesitate to ask Due to the nature of the hobby i cant accept refunds. Will be shipped with DPD next day! Looking for around £300 posted,