Dazg23 Posted April 18, 2022 Share Posted April 18, 2022 Thanks storm. So is my video normal ? apologies for going on but want to make sure I don’t damage the car. I have the o ring in but seems to do very little. thanks all Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 18, 2022 Share Posted April 18, 2022 The O rings stop the dogbones moving to far into the cup so that looks normal 1 Quote Link to comment Share on other sites More sharing options...
Seminole81 Posted April 19, 2022 Share Posted April 19, 2022 Ah, didn't see the video, yeah looks about right. If you haven't got power to one of the drivetrains, it's either diff. or on the dogbone, one of the pins is missing. We lost FWD on a MT because the pin fell out 😄 1 Quote Link to comment Share on other sites More sharing options...
Dazg23 Posted April 19, 2022 Share Posted April 19, 2022 Thanks, really appreciate your help. Quote Link to comment Share on other sites More sharing options...
Pinzarufilip Posted October 29, 2022 Share Posted October 29, 2022 On 14/02/2021 at 16:19, Loboo said: Just finished a prototype. Its reinforced in some parts. Lets see how it fits and how long it will survive 🙂 Could you please share the STL for lower arms ? thank you ! Quote Link to comment Share on other sites More sharing options...
Guaca_custom Posted February 3, 2023 Share Posted February 3, 2023 On 14/02/2021 at 15:19, Loboo said: Just finished a prototype. Its reinforced in some parts. Lets see how it fits and how long it will survive 🙂 Hi, I'm new here. Where can I get the stl file of this? I'd be interested in trying to print it in carbon fiber Quote Link to comment Share on other sites More sharing options...
Guaca_custom Posted February 3, 2023 Share Posted February 3, 2023 On 04/05/2021 at 18:50, Dan brookes said: Do you have the stl file for these, I’m new to rc and bought the maverick quantum flux as my first car and first drive out I already broke the suspension arm. Any chance you could help a newbie out. Thanks Hi, I'm new here. Where can I get the stl file of this? I'd be interested in trying to print it in carbon fiber Quote Link to comment Share on other sites More sharing options...
Guaca_custom Posted February 3, 2023 Share Posted February 3, 2023 On 14/04/2021 at 19:36, Seminole81 said: Printing done. Only PLA as the ABS extruded broke. Guessing these will be super brittle, but worth a try I suppose 😅 Hi, I'm new here. Where can I get the stl file of this? I'd be interested in trying to print it in carbon fiber Quote Link to comment Share on other sites More sharing options...
loryriga Posted October 5, 2023 Share Posted October 5, 2023 (edited) Hi everyone! This is my first mesaage here, I have a quantum+ flux XT and I'm planning a conversion to 4s. I have my eyes on the hobbywing 120A esc and rocket 3674 motor but I have some doubts on the kv rating. Considering it would be a very light 4s rig I'm wondering if 2500kv would be ok or if it's better to stick with a lower 2150kv motor and eventually use a larger pinion gear. What's your thought? Thank you very much! Edited October 5, 2023 by loryriga Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted October 5, 2023 Share Posted October 5, 2023 Hi and welcome to the forum 1 Quote Link to comment Share on other sites More sharing options...
Adam87 Posted February 1 Share Posted February 1 Hello! I am new here. Where can I get the stl file of this arms? My is broken and i wanna try print it myself 😉 Quote Link to comment Share on other sites More sharing options...
Rozzleshnozzle Posted February 2 Share Posted February 2 G'day everyone. Well, I have joined the dark side and acquired a maverick quantum+ xt flux. It has the 100amp esc and is 3s capable. I have been lurking in this part of the forum for a few days now, so I have definitely learnt what I need to get done asap, and what I want to put on the list of bits and pieces I need to buy for the future. I've only put 2 packs through it at the moment, and only today, on the second pack did I get a bit trigger happy and get it cart wheeling and tumbling around. Nothing broken so far (although the 3yr old had a tantrum and puffed my body clips, so missing one of them) but I can see a few things that need adjusting. Also, this thing was way bigger than I was expecting when I was told I'd won it, I don't think I would have personally bought a car this big, but hey, I'm not complaining. Well, I look forward to the pain that seems to be this car, and complaining, asking advice or departing with hard earned lessons about this platform. 👍🏻 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted February 2 Share Posted February 2 Nice win and hope you enjoyed using it Quote Link to comment Share on other sites More sharing options...
Rozzleshnozzle Posted February 2 Share Posted February 2 Thanks! Definitely been a bit of fun. Trying to sort out the rear toe in, and the front right hand has a bit more toe in than the left, so just fiddling with them now. Have ordered a bunch of bits and bobs for it, but I feel I may have ordered the diff oils too thin. It'll be better than what is probably in there now, so will experiment and see. Quote Link to comment Share on other sites More sharing options...
Adam87 Posted February 6 Share Posted February 6 Hello. Would someone be so kind as to provide me with an STL file for Maverick Quantum Flux swing arms? I break them quite often and I'm tired of buying it, and I would like to try printing it and see if it will be better. Quote Link to comment Share on other sites More sharing options...
Rozzleshnozzle Posted February 9 Share Posted February 9 On 06/02/2024 at 11:08, Adam87 said: Hello. Would someone be so kind as to provide me with an STL file for Maverick Quantum Flux swing arms? I break them quite often and I'm tired of buying it, and I would like to try printing it and see if it will be better. Mate, if you go back a few pages, there is definitely a link there somewhere. Quote Link to comment Share on other sites More sharing options...
Adam87 Posted February 12 Share Posted February 12 On 09/02/2024 at 19:48, Rozzleshnozzle said: Mate, if you go back a few pages, there is definitely a link there somewhere. Mate, i looked trough the entire forum first and found few links but they dont work or are out of date. That`s why im write a reqest here. Quote Link to comment Share on other sites More sharing options...
Rozzleshnozzle Posted February 13 Share Posted February 13 On 12/02/2024 at 08:23, Adam87 said: Mate, i looked trough the entire forum first and found few links but they dont work or are out of date. That`s why im write a reqest here. Ah sorry fella. They did work not too long ago. I was having a browse. I didn't keep them though as I don't have the means to print. Quote Link to comment Share on other sites More sharing options...
Rozzleshnozzle Posted February 17 Share Posted February 17 Hi all, hope you are well. So I was wondering if anyone has put diff oil in there quantum? If so, what weight did you go with for each diff any why? I bought some 7000, 5000 and 3000 cst for the front mid and rear respectively, but from a few vids I've seen here and there I think I may have made way too light choices. Would be interested in y'all opinions. Cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.