Exos Posted May 28, 2018 Share Posted May 28, 2018 (edited) I've had this up on eBay for some considerable time, however I've had all of probably 2-3 bites from people wanting it for stupidly low money (which was never going to happen especially when some of the kit is probably worth more as individual items and it cost me almost a grand originally). Probably eBay is the wrong place as it's more a piece of speciality kit. I've recently changed jobs and I have even less time nowfor this and my 1/5th and 1/8th cars. so I need to get rid. I never really flew it though, couple of times unsuccessfully in the garden, and frankly had more fun modding it with bits and pieces (legs, ceramic GPS etc). The compass/NAZA has been re-calibrated and re-setup so the TX/RX at leasts functions in the correct modes and the rotors start up. It will still need configuration post me swapping between the original TX/RX. Trim and AETR etc will need some config, so for this reason I'm selling as ARTF (although to be fair most people would need to setup to their preferences anyway). It powers up, but as above needs to be configured for correct flight. (Requires NAZA-M V2 2.4 software and a suitable windows 7/8/10 PC/Laptop with Naza (unsigned) drivers install to configure) Thought I would see if there is any interest here as a job lot before I consider breaking it up and sell as parts (not that really have the time anymore to do so lol!) Comes with: QuadCopter: TBS Discovery Top and Bottom Plates TBS Core TBS Shield 4x Black DJI 450 Arms (+2 White Spare) 4x DJI Opto 30A ESC's 4x Kopterworx KW2 Pro Motors DJI NAZA-M v2 GPS Flight Controller + GPS + Remote LED DJI Naza 4mm Ceramic Antenna Kit DJI450 / TBS Disco Leg Extenders 3 Full Pairs of 10x5 HQProp, Graupner Style Propellers 4x Graupner Carbon Reinforced Propellers 10x5 FPV: 1 x Fatshark Attitude Mig v5 Head Tracker 1 x Fatshark Receiver 1 x Fatshark SpiroNet Antenna Only need to add the camera and adapter cable and away you go. I recommend the Turnigy HD WiFi Action Cam Controller (TX/RX): 1 x Turnigy 9Xv2 2.4Ghz Receiver / Transmitter; Mode 2 with AUX Switch set for ATTI(Manual)/GPS/FAILSAFE Modes. Batteries/LiPo: 1 x Turnigy Accucell 6, Balance Charger & Cables 2 x Turnigy Zippy 30C 5000mah 4 Cell 14v LiPo (Although I recommend the Zippy Compact to close the battery door as these are a bit heavy) 1 x Turnigy 5.0 25-30C 5000Mah 3 Cell LiPo Storage: Peli 1550 Carry Case Misc: TBS Discovery Screw set RC 2-8S LiPo LiFe Cell Low Voltage Alarm / Checker GPS Folding Antenna Mount Holder for Multicopter TBS vTX Mount Custom Battery Door DJI NAZA-M v2 Phantom Spare Controller Unit DJI Naza -M v2 Spare Remote LED 4 x Propeller Guards Looking in the region of £475 Cash / via PayPal Collected. Edited May 28, 2018 by Exos Payment update. Quote Link to comment Share on other sites More sharing options...
Exos Posted May 30, 2018 Author Share Posted May 30, 2018 ..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.