fasi Posted April 19, 2014 Share Posted April 19, 2014 i just installed 12 led setup on my mt4g3 , it works fine and everthing, 4 on the front with throttle and 4 on the back with brake and indicators front and back with steering when turning left and right, but i need to know if i take it out using 6s or usual 4s, do i need to use external bec or my hobbywing 150a esc's builtin bec is adequate to supply the power my mt4g3 needs? cheers, guys Quote Link to comment Share on other sites More sharing options...
norcoforever Posted April 19, 2014 Share Posted April 19, 2014 i would run an external bec tbh hobbywings bec's aren't known to be the best Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted April 19, 2014 Share Posted April 19, 2014 If your lighting kit is running off the receiver...then I would DEFNITELY fit an external BEC to provide power. In theory, your ESC is supplying 6V to the RX, but with the servo and all the LEDs to power, I wouldn't rely on it. BEC is cheap.... fried ESC isn't Quote Link to comment Share on other sites More sharing options...
fasi Posted April 20, 2014 Author Share Posted April 20, 2014 ok cheers guyz... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.