Search the Community

Ok guys, so due to financial issues I am going to have to sell my car, no electrics except steering servo, read discription. The HPI blitz rolling chassis started life as a blitz flux roller, now it is a beast, used but in good overall condition, all you need is to add your own radio gear, motor, esc, servo, wheels and battery.

Ok so here's my ftx vantage pro, it is as new, I used it once for around 1 min, went out for a first run, started driving then it decided to start raining so packed up and we went home, weather has been poor since so it's been sitting on my shelf, the only damage/ signs of wear atall area is to the lexan under shield as shown in the pic, it has the original wheels dyed black, tyres glued, also has 2x pairs of vantage rear wheels with traxxas jato anaconda tyres belted and glued I had to import these at

HPI Firestorm This car has been built from scratch using a German Stainless Steel screw kit and a couple of essential upgrades. It has had many new parts (listed below) and is now in very, very good condition. New parts used... 2014 chassis (with waterproof receiver box). Front bulkhead. Front shock tower. Front upper brace. Upper brace set. Servo saver set. Motor guard. Rear skid plate. Rear upper brace. Gear cover. Battery brace set. Servo mount. Body mounts. Full ball bearing set. Essential upgrades... 70mm Blue/Firm rear springs (original rears springs now fitted to front). T-Bone Front bumper. Full stainless steel screw kit. Also comes with a HPI Firestorm Flux body (damaged @ rear). 20 tooth motor pinion. Motor mounting screws and washers. Original box and manual. Looking for

Picked this up new, before xmas as a little project to do however due to a promotion at work I have not had the time to complete, I have used a few stickers and sold the front sway bar kit however I will include a hot racing motor mount. they are

Traxxas eMaxx roller. In reasonable and perfectly usable condition. The body is tatty. It has been running with a 2200 Castle motor and ESC on 4s and was great fun, very nice match of speed, run-time and could wheelie easily etc too. I've got two sets of battery holders for different size LiPo's as well as a wheely bar, which isn't in the picture. I'm after

Hot bodies d413 excellent condition b5 shock caps including original, loads of spares red front springs blue rears plus originals, comes with a set of worn minipins, chassis protector, box and instructions Sold as a roller so no electrics or servo included

This is a 3Racing Sakura XI Sport touring car race chassis and bodyshell. Has the optional extra alloy floating servo mount fitted. Bodyshell is painted in a similar style to the box art. Decals have not been fitted and are included. Three Schumacher brand pinions included 48dp - 33T, 34T & 35T. The 35T is brand new in sealed bag. Also included is a brand new in pack front foam bumper and a brand new 80T spur gear. There's also a number of other useful racing spare parts as seen in the photos. Only ever run on an indoor carpet track where it was very quick. Loads of photos so please take a look. Recently bought this second hand, but due to a change in circumstances it now needs to move on. Looking to get back what I paid, so

Great all metal construction but to be honest I bought the wrong car I also bought a SCX10 the other week and I can see this being used so much more than the Gelande ever will,purely because I couldn't bring myself to scratch up that chassis The chassis has a couple of marks to it,some where the radio gear had been stuck to the radio plate and I had to remove them. Both front and rear bumpers have some traces of silver on them where I dry brushed the body whilst it was on the chassis. This is the chassis ONLY that is for sale,will include the pinion and the two screws to mount the motor to the gearbox. Any questions please ask. Looking for

Hi all I'm having a clearout to get funds in for a unexpected bill and my hyper7's are just on display not used anymore.There is a lot to list individually so I would prefer it to go cheap but as a bundle,these cars are not abused and have both been rebuilt on new unmarked chassis and with lots of new parts. The black car is a complete pbs roller inc mac28 motor and hyper pipe with lots of carbon and alloy parts also unused wheels and tyres. The other is a tq sport that is a roller and was going to be converted it brushless. There is a new 2speed box included for the nitro and a trackstar brushless combo for the other plus loads of other new and used spares as in pics. As for the price

Vbc wildfire D06 comes with used but good bodyshell, option fan holder, used wheels and tyres, with box, manual and car bag which came with it when new only been used for 6 meetings, really good and strong car only selling as upgraded to D07

Hi all Would any one be interested in swaping my trail finder 2 which has front and rear 4 link set up,punisher shafts fitted.everything is nice and tight and truck runs great. I would like a good condition scx10 pref with a couple upgrades jeep wrangler unlimited rubicon kit version jeep wrangler g6 kit version honcho kit version Or hopped up gmade r1 or axial wraith price is to obey any forum rules

Right here we have my trusty savage 25 that I have had from brand new (circa 2004). It has had countless upgrades and mods performed (ofna 4 gear diffs, hobao steering saver, reinforced engine plate, updated radio tray, Derlin roll over bar etc etc) to make it the bulletproof savage that you see before you today. This savage is almost like a member of the family so I would like it to go to someone who will look after it. The only downside is that the wheels and tyres are pretty shot and will need replacing as the centres have pulled through, hence my creative solution with the wheel fixings. It comes with all the spares in the bottom picture and I am looking for

Here I have for sale my Team Assosiated RC8T Factory Team truggy. This is an amazingly durable truggy, I have run it pretty hard and never broken a single thing. I have maintained it to a high standard though and has had regular attention paid to oils/bearings etc. The reason I am selling this is the fact I have just started racing a 1/8th E-buggy and I need the room so it has to go. I have not used this for a few months but before I took it out of action I stripped it, cleaned it and replaced any dodgy bearings and also changed all the oils. It has been run on dirt so the chassis has some scratches as you can see in the pictures Also included in the sale are 5 sets of wheels/tyres. 2 sets are in good condition, the other 3 have some defects, whether that be heavy wear or some small tears etc. For bashing/testing purposes they still function ok. There are quite a few spares with the truggy as you can see from the pictures, included with them are loads of shock spares (shafts, pistons etc), a spare pair of drive shafts which are brand new in the pack, 2 pairs of rear uprights/hubs, new link rod ends, a few spring sets, air filters and loads of other stuff as well (its all in the pictures). The body shell is in good condition apart from a crack appearing from the corner of the windscreen where I cut the ventilation hole, this can be easily repaired though. To make this work you will need an engine, pipe, clutch setup (any 1/8th buggy clutch setup/bell will work), servo's and a radio. Alternatively this would be a prime candidate for a brushless conversion, I was intending on it but racing takes priority so it has to go. I'm looking for

sold thanks all

decided to sell my kat k1 which i bought with the intention of getting into buggy racing but just not my thing it comes with loads of spares most new in packet i will try to answer questions the best can do more pics if needed looking for

I've had this project on the backburner for awhile now and to be honest I don't think I'll be finishing it off :/ So rather than it just sitting there gathering dust I've decided to put it up for sale As you can see its got a centre diff conversion which although straight and fully working - I wasn't 100% happy with it I wanted the motor mount to be sitting at a certain point on the chassis which meant drilling some new holes - in hindsight I should have used a drillpress rather than just having a few glasses of wine and thinking "pffft! yeah, I'll just use the drill, everything'll be fine...." You can see that there's also a bit of play with diff - also down to me drilling those holes... A brand new chassis is a tenner on eBay.... The rear shocks are actually 2 sets of front hyper 7 shocks - really good and I wanted to get hyper 7 front shocks for the fronts on the mta4, but didn't get round to it The diffs are in great condition - new diff oil was put in 20k-50k-20k It comes with the centre diff/motor mount, a good set of wheels, a set of driveshafts, some really good RPM arms, 2 spare complete diffs (in great condition) The stock arms, another chassis (with 2 botched holes...*ahem*) Spare set of side guards and some other bits and bobs The shell is in good condition apart from a small split on one side (pic to follow) The current chassis was a replacement one I got from ebay and has got some cosmetic blemishes on it (who knows what the last owner was trying to do to it??!) It doesn't affect the rest of the truck in any way Although its not perfect it won't take much to complete and would make a great project to finish over the winter I'd like

Just bought this, but now I need a new Esc as mine, as coughed and farted, comes with ok shell, wheels, set of spare arms, Ali rear hubs. Thats it really.

As per title Kyosho RB6 no electrics included complete with Gear diff with 5000wt oil X Gear orange super hard springs on front X Gear Gold rear springs Exotek thumb nuts and posts Carbon fibre battery brace Alloy rear hinge braces Yaiba racing alloy steering rack It has the RB5 rear arm mod on it Alloy rear block I think this it's what it's called it fits under rear shock tower lol! Spares package includes ball diff which requires assembling It will need new balls which are not included Wishbones Shock shafts Front and rear shock tower Ball cups Spring kit No returns accepted due to the nature of the hobby Car is in good working order and got me 4th in the b final at TRAC this weekend only selling due to buying kf.

Hyper 7 pbs brushless roller, new chassis, new motor mount, new battery tray, rebuilt diffs swaps or

HI this is another roller i have was wanting to buy a brushless system but cant be bothered just going to get something fully RTR once ive sold this and the thunder tiger nitro car i have also for sale on here. the truggy is in really good condition has shock socks fitted and the chassis is in very good condition has steering servo fitted. checked the main spur gear and is again in really good condition. has wheelie bar fitted, this is a roller so has no motor, esc or controller/reciver. rear tyres are worn and not got alot of tread left but the fronts are like brand new. wanting

HI Guys got this today and the engine i have is the wrong one so absoulty no good to me the car has all the alloy hop ups and is fully belt driven, the car is 4wd but only comes with rear shafts so is only rwd at the moment. i have included a engine mount that fits as it didnt come with one when i bought it.

Hi all, im selling my Hot Bodies D8T roller It has two shell (white one recently done which has also been shoe gooed with matching wing) A set of badlands Selection of spares TBR bumpers front and rear Box (if collected. can maybe flat pack but it will more than likely be useless then) and manual Truggy is self is in good condition. Drivetrain showing signs of wear and just general signs of use which is expected. Truggy will be sent fully insured with next day delivery Sold as seen so please study pics carefully but feel free to pm me with any questions etc you may have What you see is what you get No returns due to nature of the hobby Mainland UK only SOLD

Baja sc roller can include cheap radio gear so all thats need is engine and exhaust and a gear set (55t spur ) as 19t pinion included Overall good nick it jas been used so dont expect a shelf queen Couple of km braces http://pages.ebay.com/link/?nav=item.view&alt=web&id=400820824712 Baja 5t wide body

Next week i will be selling my mi4cxl as a roller. Ive had it just over a year and its been a great car to drive and work on but i fancied a change and am now going to be racing a hobao h4e so am selling the mi4 to fund some spares for the hobao. It will be getting used for the last time this friday so providing nothing breaks condition is as follows. Rebuilt last week spec r gear diff with 1000cst oil Alloy rear suspension blocks to allow more tuning options on the rear Carpet and asphalt top decks supplied Spare slider inserts for the diff and spool CNC delrin centre pulley was put in a couple of months ago to reduce wear on the belts as the alloy one was worn out. Bottom of the chassis is in good nick as i only ever run it on carpet, however there are 2 slight nicks on the edge of the chassis but these has been sanded and sealed again with super glue Shocks rebuilt with new o rings an bladders about 4 meetings ago. The front cvd's are quite worn and one of them has got a minor bend in it but i have run it like this for over a year and it has caused no issues at all. Car will be fully stripped and cleaned before posting out. Collection from sheffield

I've got too many projects on the go so this needs to make way for some parts. It's a vintage Schumacher CAT XLS in the option saddle pack chassis comes with the servo and receiver pictured both un tested and no front bumper. Diffs seem ok and its got a MMS layshaft. It's in need of a little tlc but it is 25 years old and would make a great little project. I'm looking for