Search the Community

For sale is a habao hyper 10TT. It is pretty much brand new only been used once outside. It was bought as a roller from modelsport about a year ago. Since has been on the shelf collecting dust! Included is - -The car itself and shell. -Proline 2.2 titan beadlocks -Proline big joe 2.2 tyres. -Turnigy 100a esc - one wire needs bullet connector resoldering, its the 'A' wire. -Turnigy 10t 3900kv motor - 2 5000mah 2 cell lipos. -Origional tyres and wheels. -Loads of spares all new in packets. A-arm, hubs, towers etc. Ever since getting a baja i have spent money on and used that so i just never got round to really getting into it, its a fun little car though. Not sure on price, make me an offer. Bare in mind everything is pretty much new or brand new. For rules sake

Hpi trophy truggy v2 with 3.5 with transmitter and receiver just add Ur own battery and wheelz/tyres just had a new 3peice clutch flywheel and vented bell also had new pullstart 150 good clean condition

Very very regrettable sale, but after an unwanted house move, I'm having to give up most of my collection due to a severe lack of space to run them. I built this with the intentions of beating the snot out of it because they're such awesome truggies, but sadly, it's not to be! So, onto the truggy. As per the title, it's a brushless converted Losi 8ight-T 2.0. Hobbywing Quicrun 150a ESC. Leopard 2000kv motor (I shall get the exact spec as soon as I find the box) Savox 1258TG servo, sticker is missing off the top but it is a genuine Savox 1258. ESC will need programming as I haven't run it properly yet. Quite a lot of spares, one of the tyres on the spare set of Grinders needs some fresh glue, it's also got a couple of tears, but that's what the spare one is for, just a different colour, but theirs a white wheel too. Couple of shells, which are in usable condition but obviously not perfect. Spare chassis, arms etc... All in good condition. Please check the pictures to see everything included as theirs a fair bit I'm looking for

Hpi Firestorm This is less than 4 months old and started life as a brushed version but i soon got bored of the lack of power the brushed setup offered. I upgraded to a Etronix Photon SBS 2.1FW 60 amp ESC with a 4350kc motor. I also fitted a wheelie bar to help with it flipping, the brushless set up also comes with a digital program card to adjust the ESC. Comes with the spares it came with in the box, manual, boxed It is listed as ARTR because you will need your own TX as i use a flysky setup and i need to keep my tx for my other cars, i will leave the flysky receiver in though. Runs and drives exactly as it should and is very quick, i have only ran it on 2s/3s and on 3s it is rapid. Please see below for pics and a price

Artr losi ten rally cross fitted with 17mm hex extenders with buggy tyres appart from that its stock Bradford area looking for 260 good clean condition really good quality rally car very strong ... ill post at buyers cost thanks for looking

my lovely TT01 drifter is up for sale with transmiter and all!! car is on a BRAND NEW CHASSIS! just need a battery!

Hyper GT 1/8 road car flux rtr as new vgc / it is big for a 1/8 car Teasted once only 5 min No lipo battery , will include the lipo charger also has the program card that is in the box not used it 22 tooth pinion, plus comes with a spare 46 tooth spur gear, 250 Need gone Boxed it up so not in the way Collect only North London

baja shorty not sure if it startetd life as hpi or km ,, diy shorty 45mm shorter than stock ,, all near enough standard bar black window kit,, rpm front bumper,, alloy rear towers,, proline bowtie rear tires,, red beadlocks and turnigy 22kg throttle servo and custom rx box,,,, if the other parts on the car are owt to go by i think it maybe hpi as the filter,, wheels ,, steering servo,, spur cover etc are all hpi ,, now the buggy runs but refuses to idle so it could just need a new plug at worst case it needs a headkit what can e picked up at rc modelz for

http://pages.ebay.com/link/?nav=item.view&alt=web&id=121654873314

Here we have my hpi vorza which up until Friday was all working perfectly. Basically I went out with it on Friday and was having a play around doing a few jumps etc then my mate had ago and it stopped working we had been playing for a while and I thought the battery had gone flat came home charged it etc yesterday tried it and its still not working. I have checked all connections etc and everything is still plugged in. Basically I am under the impression that either the esc or receiver is faulty. You plug it in it still does the usual beeps etc but is unresponsive no steering throttle etc just a red flashing light on the esc. I am buying a house so don't have time to mess about. I will either sell it as it is with everything in the pictures or if enough interest I will sell it in parts. It has the castle creations motor and fitted with a 150a hobbyking esc, hpi 2.4ghz, turnigy hardcase 4s battery there's loads of wheels and tyres some perfectly useable and some have seen better days theres also a set of hard rubber ones for on road use. I am looking for

Hi, cheers for looking, i have decided to sell my axial yeti kit version, its fully built and almost ready to run, you will need tx/rx and lipos to run, it comes with a brand new etronix photon 6s capable combo, 150amp esc and 2150kv motor, brand new spektrum 22kg steering servo. Honestly i have run this monster buggy on 5s for about 1 minuite in the front garden, litrally 1 minuite, its a awesome buggy but i want to concentrate on my 1/8 racing now as i dont get out much now with my rc's so i have decided to let it go, i would prefer collection due to the size but i will post if i can find a box big enough. it is the kit version so has the upgrades already over the stock rtr one, i would however highly recomend the alloy steering servo saver set up, it's very bendy as is,

For sale sooner than expected but I have just bought a E-Revo brushed that I am going to convert to brushless. The Stampede has been used about a dozen or so times. Has the usual battle scars as a result Tekno rear drive shafts fitted,I have the fronts on order as well and will forward those to the buyer when they arrive. Also has blue alloy shock caps. Comes with the stock parts that have been removed to fit these as well as the other spares and tools it usually comes with as well as the controller. The cover that goes over the centre driveshaft broke so it isn't there and as a result the centre driveshaft has some battle scars on it Body has taken a bit of a beating but still pretty solid. Wheels/tyres have some water trapped in them from the last time I ran it. No instructions but can be downloaded from the Traxxas website. Comes ARTR with just a suitable lipo and charger being all that is needed. Will have to get a box for it from work so postage wont be till Tuesday at the earliest. Looking for

Up for grabs is my Parkzone BF-109 messerschmitt Beautiful looking warbird that i have never been brave enough to fly, i haven't been doing the hobby long and i am training on my Super cub and i thought it was an injustice to have this sat on the wardrobe when it should be up in the sky. It comes almost ready to fly all you will need is a 11.1v 3 cell lipo battery and a 6 channel transmitter. The plane comes with a 6 channel spektrum receiver, esc and brushless motor, all servos. The wingspan is 1100mm wide and the length of the plane is 940mm (approx) Never been crashed as you will see on inspection, speaking of which any inspection is welcome prior to bidding. Due to the nature of this hobby i cannt offer returns I cannot offer postage on this item because of its size and danger of damage in transport. Collection only from the L15 area of Liverpool

Hi, These don't get used much now so might as well let them go to fund other things.... Namely a replacement gearbox for my discovery. Traxxas rally vxl 1/16 scale, super fast and all stock, but the shell is used and so are the wheels/tyres, I will include another set (maybe 2) of wheels and tyres, another basher shell and a new un painted shell and new body post set in packet too. Looking for

I have for sale these 2 little beauties on eBay, take a look, make a bid or message me an offer if your interested, hate to sell but my collection is too big and due to a job change I need to buy a new 1/1 car. Turnigy rally extreme inc lipo artr :- http://pages.ebay.com/link/?nav=item.view&alt=web&id=161696947303 Hpi formula ten, inc brushless mother and esc, lipo and upgrades artr :- http://pages.ebay.com/link/?nav=item.view&alt=web&id=161697003472

Hotbodies D812 almost RTR good condition very well looked after had recent front and rear arms ball ends andsteering assembly. Comes with Reds R5 Classic and pipe 2 sets of tyres hump pack etronix radio and spares all you need is servos and fuel looking for

Hi guys, another RC18R up for sale, was going to make this a rally car but managed to get a TB-01 for fairly cheap so I'm only keeping my on road apex mini. This comes with a brushless ESC which works fine, and a hitec servo. You'll need a brushless motor (pinions too), batteries and radio gear. Upgrades included are aluminium steering rack, aluminium dogbones, aluminium motor mount, front short aluminium shocks, rear standard long shocks. 3 bodies included, one of the Mitsubishi shells is like new, the other 2 are for general bashing and have scratches as you can see. Comes with extra wheels. The diffs are new and rebuilt, the spur gear is also new. The chassis has some scratches but is in good overall condition. Looking for

SCX10 Rubicon, comes artr, no tx/rx. Lipo in pics not included. Gutted to sell but... Savox SW-0231mg waterproof servo HPI Racing SC-15WP Waterproof ESC (2s) Saturn 35t Motor Alloy case gearbox and full metal gearing inc spur Boom Racing Boomerang Internal shocks Brass beef tubes front and back in axles Killer RC Baja lights on front Aluminum Front C-Hub & Knuckle Arm set Alu rear knuckles Full alu steering linkage and servo horn. Trepador tyres all round... Check out the pics, I've probs missed something out. Also comes with a Saturn 55t and Tamiya Torque Tuned 33t Motor too (not pictured). Gutted to sell but needs must eh.... Payment via paypal (plus fee's) or cash on collection. Any questions fire away, not splitting. Will be fully cleaned for new owner, not that its really dirty! Full pics here - http://s1070.photobucket.com/user/alandavidson80/slideshow/SCX10

Hi guys, my first ever post here. I decided to sell all my rc cars and get a Axial Yeti ( I just love how it looks), and the Vaterra is just not for me, my driving style. It needs a charger and shifting servo as I used one from my other car I need to sell. It's the RTR version, with a radient reaktor 3500kv brushlesa, the battery tray has a broken holding pin, I use a zip tie, has the stock 2000mah 2s, and a saddle pick from turnigy nanotech 5100 that fits properly. I also add the old brushless system and metal gear for the transmission. The top 2 screws for the rear shock are worn, I used some long nose pliars to undo them. For all of the above I am looking for 220

Hi, I am selling my Tamiya Panther G, due to losing interest and having other commitments, as you can see, it is in quite an advanced state of assembly, upgrades I have fitted are Impact metal tracks, aluminium gun barrel, tow cables and other accessories from Welsh Dragon and Axels, I have not been happy at the gun elevation gearbox and have tried fitting a Savox metal gear digital servo, which kind of works but needs more effort than I can put into it at the moment, the rest works exactly how it should, all parts to finish this kit are in the original box, + a spare gearbox and motor, as the original one had a bent drive shaft, also the original elevation gearbox. There's is a little Turnigy widget connected to the motors which slows down the acceleration and braking to look more realistic (sorry can't remember what it's called) and works well. The tank has only ever been run on carpet and wood floors, never outside. Due to the weight and size of this kit and box, I am reluctant to post and would prefer collection, now to the important bit, price, offers in the

Hyper 7. 28 pullstart engine. Just needs, steering servo, TX/RX. Can be seen running. Collection only, near J28, of M1.

Hi all Up for swaps is my old type 1/16 clutch type tamiya king tiger project comes with 4ch futaba radio. fitted with metal tracks etc swap for nitro rally x buggy or battery short course truck like sc10 or slash or may consider tamiya cc01 hard body rig may take cash offer also,located in brigg north lincs

The TT-02-R is one of the most sought after kits available from Tamiya. It features the popular TT-02 chassis which has been hopped-up. They also feature some incredibly detailed body shells of iconic cars such as the NEW Porsche 911 RSR Chassis body shown here. Paint is in ICONIC bold Blue with race detailing. Also fitted with a set of all chrome BBS's wheels, extra wide on the rear and slimmer on the front which set the car off. Includes Electronic Speed Controller. A complete kit ready to use or race. These kits are well balanced from standard with the additional minor upgrades listed below help with better car control. This refined, race-spec version of the TT-02 chassis features a wide range of option parts and newly-designed components to make it ready to race! The included racing spec parts include upgraded uprights, motor mount, shafts, joint cups and more, while the suspension is fitted with metal parts and CVA oil dampers. It retains the TT-02's versatility and easy-to-drive characteristics. Brake disc-shaped, wheel hubs which add to the chassis' highly realistic appearance. The 4-wheel independent double wishbone suspension features friction dampers and uses identical L/R suspension arms and uprights for ease of assembly and maintenance. Both the motor and the battery are longitudinally-placed in the ABS resin chassis for excellent balance. Upright assembly can be changed to give the chassis an extra 4mm of travel for Rally racing Here for sale is my KIT Tamiya TT02-R car, started life as a TT-02-R with minor upgrades as listed below. Its been great fun for the hand full of indoor runs and has so much potential for many more upgrades. Here is a list of the parts fitted. Painted Tamiya Blue un-marked Porsche 911 RSR body shell (NEWish) (some minor marks and little over spray on paint over laps) Deep dish all speedway 7mm fronts and 10mm rears stance alloys with drift tyres, deeper rears (NEW) Fully ball raced from hubs to prop-shaft and diff's (NEW) Ally Blue steering arms (NEW) Ally Dampness/height adjustable oil filled suspension/dampers (NEW) Electronic Speed controller (NEW) Tamiya Sports Tuned Motor (NEW) Suspension: Fully Independent Double Wishbone Adjustable ride height Adjustable gear ratio Adjustable wheelbase Adjustable track width Adjustable shock angle HPI radio gear - Transmitter/receiver Acoms servo Electronic Speed Controller 2000 tamiya mAh Battery Heavy duty Ni-MH Battery charger Supplied with body un-used stickers if needed to convert body into a race looking. Price -

My eBay ad - http://www.ebay.co.uk/itm/151664837218?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Took my T Maxx out the other day, the conrod failed and took the piston with it. The sleeve looks undamaged but I'm not sure I can replace the piston without replacing the sleeve due to mating of the two. Up to this point the car has been well maintained and has always run great from brand new in 2008. You don't need me to tell you how fast or powerful these 3.3 TRX engines are..this car will when tuned right wheelie as long as you can keep your 'foot' down and will hit 40mph+ on almost any surface. Amazing fun and hugely satisfying...The upgraded rear end with the firmer springs, true track kit and heavier oil really gets rid of that saggy TMaxx feel meaning you can run a lower centre of gravity for massively improved handling and responsiveness - stopping it flipping over in corners at speed and also makes it capable of bigger. longer jumps. This car is great for bashing and tough too, I've only ever broken a arms before now. The car has had some recent upgrades and new parts prior to one failed run including...head protector, high quality silicone fuel lines, fuel filter, fuel cooler, HSP throttle servo failsafe, RPM truetrack kit, RPM rear shock tower, RPM rear body mounts, glow plug, all rubber seals and clips recently replaced, cable harness, four shock springs, shock oil, digital steering servo, new 2.4ghz radio gear and a new air filter to get this ready for summer but I can't afford to spend any more money on this unfortunately. All the above parts have had next to no use, maybe a few hours at the most. Diffs, tranny, brakes etc all in very good condition and well maintained. Clutch, bell, carb etc and other engine parts all in good condition. Failed parts included. The engine has been given after run oil and is in a sealy bag to prevent any moisture getting to it before it can be rebuilt. The parts required to get this back in full working order are available here for about