jacko_barber77

Gaz, i want the exact same as the photo, so yeah, tucked under then lowered, but so the tyres are only slightly inwards Same colour scheme too, if i can find the same beautiful paint Also, how i paint the wheels so they have green in the center? like the photo, the green on the inside, would it be a masking job? or hand painting? thanks for the help, Jack

thanks for that mate, but i've changed my mind and fallen in love with this: http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Raekelboom%20Kevin/DSC03695.jpg So i'm thinking these wheels: http://r2hobbies.com/1-10-rc-car-net-wheel-sports-26mm-4pcs.html And this shell: http://www.ebay.co.uk/itm/Tamiya-51339-Body-Set-Volkswagen-Golf-GTI-Cup-Car-1-10-/390340705058?pt=Radio_Control_Parts_Accessories&hash=item5ae21e7b22 Jack

got a few ideas, the standard subaru body shell is crap. So i'm thinking this: http://prolineracing.com/1956-ford-f-100 But would it fit? and if not, what would it take to make it fit? thanks again, jack

sweet, thanks for the help guys!

Lads, Lads, Lads, calm down This is what's in my basket so far: X2: http://r2hobbies.com/1-10-rc-car-lp29-t-drift-bridgestone-potenza-re-11-drift-tyres-tires-4pcs.html X1: http://r2hobbies.com/1-10-rc-car-12-spoke-wheel-sports-26mm-black.html X1: http://r2hobbies.com/1-10-rc-car-5-spoke-sporty-wheel-black-4pcs.html Any opinions welcome, but please no bickering

what's the best way to lock rear diff? bluetack trick? thanks guys!

just read the sticky thread about tt01's at the top, and yeah, going to lock the rear diff tomorrow, any other sensible mods i need to do?

Hi guys, this is my first time drifting so go steady! i wanted to try something new other than scale/trail r/c, and as a mate of mine had an TT01 lying around, i was quick to take it from him for nothing at all! As it must be atleast 5 years old, i ripped out the old- fashioned ESC and motor, and threw in a VXL brushless esc and motor out of my traxxas rustler, plugged in a battery and took it for a spin, but i cannot get it to drift unless the road surface is slightly wet; is this due to tyres? i'm pretty sure they are the standard ones on there, so what would be best for tarmac use? and is the motor and esc too powerful? or should they do the trick? Also, where would i be able to pick up a Ford F100/ similar bodyshell? Ebay job? Thanks alot, Jacko

Any updates? or has it defo been sold?

ahh, fair enough, i'll have to get one of those purchased then, also whilst i'm here, what would i need to make working indicators? to make them flash and to turn them on and off with the steering of the wheel? thanks alot, jack

Hi all, thought this would be best here, so here goes: I'm in the process of kitting out my Ibex CC01 with led light, i've wired them all up and they gladly work perfect. But i've run myself in to a bit of a dilema, basically i don't have the slightest clue how to wire them to my esc using a seperate switch. I'm going to add the wires that will connect to my esc battery leads, then add a switch, which then goes to the led's. But i don't have the wiring knowledge to wire them to my 6-pin switch. Which wires go where? Thanks, sorry no pictures to help, but you hopefully get the idea! Jack

I'm looking for a transmission of some sort, any make, but it would be better if it was Axial, with motor, not bothered what motor it is at all. Needs to be in good working order, spur gear and pinion etc. Would pay extra if it came with the original mount for the axial chassis an driveshafts etc... PM me if you have anything that may be of interest to me Cheers, jack

100 minimum, sorry guys, need as much as i can get for this, got things to pay for :/

huge price drop, looking for 100 GBP posted!

bump nobody interested?