Rodo

This is the last of my RC stuff to look to sell (see other adverts). It's my HPI Baja 5B SS buggy. It's 5th scale, petrol, 26cc. I've used it mainly for bashing so it does have some raod rash here and there. It's been sitting for a while, so I've just stripped it all back and built it back up. I've replaced the driveshaft gaters, rear wheel bearings (fast eddy), front shock tower uprights. It's standard apart from the outerwears for the engine, pullstart and shocks, it has killer rc suspension limiting straps and a killer rc superbee. It comes with a Spektrum SLT3 Radio, bought a month back to go with this (sold my Futaba separate). Has Savox Digital SV-0235MG Servo for steering and Savox Digital SC-1256TG for throttle. Great fun for bashing. Again, I cannot seem to get files to load for pictures (it's beyond my technical ability), but I have a Flickr album where you can see pictures. If you have any question, please let me know and I'll do my best to answer. I'm looking for £350. It's a heavy thing, so would rather a pickup, it's Motherwell, central Scotland. https://flic.kr/s/aHBqjAbeKh

Photos: https://flic.kr/s/aHBqjA6znD HPI Baja / Kraken RC 5th Scale parts. This was a project I started a few years back, but it's been sitting neglected and it'a time to move it on. I know it's hard to pick up on someone elses project, but it's not that far in so gives you a chance to put your own touches to it and build how you want. These parts have never made it further than the workbench and some are still in original packaging, so if there are parts you do not agree with, you can move them on. Looking to see if I can sell as a whole before I break it for parts. Listed below is what I have. Kraken X3 Steel Polymer Chassis Kraken TSK-b Class 1 Conversion Kit Kraken X2e Extended Arms Kraken Titanium Hinge Pins Set Kraken Rear Spolier Light Kit Kraken Light Rack Kit Kraken Bumper Light Rack Kit Kraken Spare Wheel Mount Kit Modified RC Rear Chassis Skid Plate 5B PhatDad RC Rear Anti Squat Brace 2 Degree Turtle Racing Front Shock/Tower Brace Gunmetal Turtle Racing Front Chassis Brace Gunmetal Turtle Racing Alloy Servo Saver DDM Aluminium Bell Crank Post Braces IRP Steel Racing Rod End Set IRP Extended Front Turnbuckles FastEddy Wheel Bearing Kit Threshold Rezzies V1.5 Threshold 1/2" Rezzi Clamps Tony's Screw Kit FastEddy Hub Cones HPI HD Front Hex Hub Grey HPI Battery Tray Bottom HPI Rear Bulk Head Team Chase Shock Tower Mounts It's a solid foundation if you were looking to do the TSK-b conversion and gives some additional parts. I reckon it's about £1600 worth when I bought all this stuff, so looking to recover about half of that. If it doesn't sell as a whole, I will look to break it up and sell the parts, but I'm in no immediate rush, so that will be a little while away. I'm based in central Scotland, Glasgow area, so would prefer a local pick up, but I have some original boxes so could look to ship, but would need to work out costs etc. Again, I wasn't able to link an image from Flickr to the post, but the link will get you to an album of photos of all the bits. https://flic.kr/s/aHBqjA6znD Any questions, or comments, please let me know.

Team Associated RC8.2e Factory Team 1/8 Scale RC Car #80907. I've had this car for a good few years but it really has not been used much, but it has been used, so there is some road rash on it, espcially on the front shocks and towers as you can see from the photo. The car is the Factory Team edition, so it was a build and comes with some hop-ups as part of the kit. It is with a Castle Creations 1512 Series motor rated at 2650kv. It has the Castle Creations Mamba Monster 2 ESC with Castle Creations connectors. The car is nice and fast. It has a Savox SC1256TG Digital steering servo and a Futaba 304SB Reciever. The is NO transmitter with this car. The body shell is a JConcepts and while fine, might not be everybodies taste in colour schemes (it was my first and only paint attempt). Car comes with a build manual, 30C 4SIP 3200mAh Lipo Battery (has been sitting for a while), charge cable with castle connectors, Voltz Vault Charge bag. If there are any questions please do ask. I'm in Motherwell, central Scotland and would prefere a local sales as the car would be expensive to post, although I am willing to look into it. I'm looking for around the £300 mark for it. There is a Flickr album with photos. https://flic.kr/s/aHBqjA6CDh I cannot get the image URL to accept the Flickr link, so not sure how to display a image here,

@NitroholicThank you for your reply. I does make sense parting it, it would be the same with a real car, so I think I would look to do that. Half the price of what I paid would be a fair return I think. Appreciate your thoughts

Hi, I feel bad being a new member and the first post is about selling items, but it is what it is. I've not been active on the hobby for a few years now and have decided my RC days are over. Too many other hobbies eating my cash. I'm selling everything on and have already got shot of a transmitter, HPI Savage and I have an idea of prices for my Baja 5B SS and Associated RC8.2e Factory, however I am struggling with pricing for a project I started and like all projects, never got round to completing. It was a build from scratch of a Baja 5B but with the Kraken RC TSK-b Class 1 body. I have some bits from said project and would really appreciate some advise on potential value and if it is better selling as a whole or for parts. I've listed below the main parts that I have. Everything is pretty much new, with just being taken out the packagaing an assembled. The only issue is one of the bolts on the modified chassis seems to be stripped, not sure aluminium was a good idea and to be honest, I would probably have removed these and just used a nyloc nut. X3 Steel Polymer Chassis Kraken TSK-b Class 1 Conversion Kit Kraken Rear Chassis Skid Plate 5B Modified RC X2e Extended Arms Kraken Rear Anti Squat Brace 2 Degree PhatDad RC Front Shock/Tower Brace Gunmetal Turtle Racing Front Chassis Brace Gunmetal Turtle Racing Alloy Servo Saver Turtle Racing Titanium Hinge Pins Set Kraken Aluminium Bell Crank Post Braces DDM Steel Racing Rod End Set IRP Extended Front Turnbuckles IRP Wheel Bearing Kit FastEddy Rezzies V1.5 Threshold 1/2" Rezzi Clamps Threshold Rear Spolier Light Kit Kraken Light Rack Kit Kraken Bumper Light Rack Kit Kraken Spare Wheel Mount Kit Kraken Screw Kit Tonys Hub Cones FastEddy HD Front Hex Hub Grey HPI Battery Tray HPI Rear Bulk Head HPI I'd appreciate though on this, Robert