emilevirus

I'm looking a multi charging board like this. Would anyone have or know where to buy one? They're out of stock everywhere. I know I can buy a multi wire with all plugs but I really need a board.

If the battery isn't puffed, you should be fine. Your charger should refuse to charge it if your voltage is under 3v per cell.

That's kinda hard, my ESC is a 8bl150, so it can punch 1000A.

I'd like to try my truck to see what it's like with 5S. I have a Zeee 5200mah 50C 2s and a HRB 5200mah 50C 3s but 100C burst. Is it okay to use them in series for a few runs just to try it out. Eventually I'll get another battery same brand same rating but I'd like to try it out first. Is that okay or will the Zeee battery go boom?

I found a Rovan Torland XL is the same size as a Savage XL. Can get a shell for like £20 and it's in PC.

My friend gave me a Savage XL Flux roller without body shell. I'm looking for a cheap body shell. Don't want to overpay as it's to bash and it'll get destroyed within a few days. Would a ZD Racing truck MT-8 shell fit on it? If not, what should I be looking at? I have a 3670 2500kv laying around with a 120A ESC. Will that be fine to run on 4S or do I need a bigger one?

No, it's a esc combo and the servo is a 5 wire so whole electronic needs to be changed

No receiver 😕

I'm looking for a 1/12 car for small tracks and indoor use. I'd like it to come with a real receiver so I can use my own transmitter. I was looking for the Feiyue FY03H brushless but it seems very bouncy and seems to roll over easily. Any suggestions?

Direct contact. I ended up buying a smart charger and soldiering a plug on the balance board to bypass the main lead requirement. It works just fine.

I have a deal on a Ezrun MAX10 SCT 120A I wanted to get, but spec sheet says it's for 1/10 only. Why? The ESC in my 1/8 truggy is also 120A and it works just fine. Why would it not handle a 40xx motor if it's 120A? Is it just for marketing purposes? My motor is a 2200kv Thanks for clarifying.

Not really, it's not a plug. I know that some chargers allow charging using balance lead under 3A, but I'm not sure which. I know RedCat sells a rebranded P403, but it's out of stock as well. There may be other variants.

I meant a "smart" one, where you can see the MAh, change the charge current, etc. Like the P403 does

I'm looking for a smart charger that can charge 2S only from balance lead. Yes, I know balance lead can't push up more than 3A, but I don't mind. It's for a battery with a proprietary connector and I cannot change it. I found the Turnigy P403, but it doesn't seem to be available anywhere. Any advice?

Today I turned it on and it automagically stopped having the delay. But yeah, these most likely have fake ratings. There's no way mine has 120a. It's more like a 35a.