So I bought my car ran it in for a good tank and then only slightly throttled after that and then used it decently the last time I took it out so only took out three times, anyways I bought a kill switch switchblade version 1 wired in and then started the car but this kill switch button nor the actual stop button worked so the only way I knew from nitro to turn the engine off was by putting my finger over the exhaust pipe, I then took it apart again and took the coil off of the flywheel and wired the kill switch directly into the car so now the only way to turn the car off is by the controller, anyways I used a business card to get the correct spacing and then went to start still not starting so I took the kill switch off and then took the spark plug out and I’m not getting a spark on the plug now so would you say it’s a spark plug problem and to buy one and try again with the new plug as I could have messed it up ? What’s your thoughts will give more details if needed. Just want to go out and bash it around but have spent a good 4-5 hours now putting together and taking apart.