Scotty97

That second charger is very similar to the Annsmann one I have, slightly different looks but same functions

I was given a hump pack charger with some bits I bought, so I bought a few hump packs for my hyper 7s and hyper ST. the charger charges at 80mah and it’s a 1600mah battery, so 20 hours is ridiculous when I got 3 batteries and plan on getting one or two more. I also have a Annsmann Racing X base charger for my Lipo batteries. it states it charges NIMH batteries and that I can adjust current , but I’m not sure if the voltage is adjustable, the manual shows 7.2v, but these batteries are 6v Is this charger better to use with the hump packs?

What about the set RCButcher has then?

Ok, I thought you may have found some as JamesB and RCButcher have replied saying they have some?

Hi are you still after badlands? if not, I’d be interested in them

My mate give me one and it fitted, looks a like a Fastrax one, so I’ve order some spares too. thanks everyone for ur help

Thanks all, just found another thread from 2013 we they said the Fastrax rubbers are a better fit, but are not as strong and split. any others I could try

Anyone fitted a Jammin Jp-2 or similar exhaust to a hyper. seems to be a really tight fit over manifold rubber? any tips to fitting it??

Yes I was looking at badlands but they come in 2.8” or 3.8”??

Well I’ve got an ST on order, and been looking at some different wheels. what size wheels would people recommend for the Hyper ST? ive seen this car which looks awesome, and was wondering what size these wheels are?? (who Evers car this is? I hope you don’t mind me stealing the photo?)

Thanks anyone recommend a good hump pack then??

Thanks for the info, wouldn’t want to damage connector my plugging it in all the time

I’m looking to try a 6v hump pack on my hyper 7s and Hyper ST. just wondering, if I buy a hump pack with the two leads on, can I leave one connected to switch all the time and charge through the other lead?? or do I need to disconnect it from car every time I want to charge it?? my concern is unplugging it all the time could cause the springs to go in the contacts, this happened to me on one of my hypers causing a dodgy connection of the 4 AA battery pack and the buggy ending upside down in the river 🤦‍♂️🤦‍♂️

Looking for a truggy for around the £300 mark. going to be used for general bashing and not racing, whst are your recommendations?? thanks

Ok Thanks i’ll measure the voltages and see the difference, and look to swap somethings around