toyolien

I built these two up for my Daughters to use last year, but in the end, they decided they would have more fun with Lunchboxes, so decided to sell these two. Started as a TT-02d but built up in the higher ground clearance options. They are both identical apart from the body colour. The hops included are: Tamiya GT Tuned motor. Tamiya alloy blue center shaft and cups. Tamiya carbon rear body post supports. 55mm Tamiya CVA's (instead of the 50mm kit one, that are also included). Steel pinion. Fully ballraced. Tamiya 54550 Low Friction Step Screw for smoother steering. Steering turnbuckles. Tamiya Ford Focus wheels with Rally tires. Includes 1060 esc and steering servo. (NO RECEIVER is included). Also comes with original box, manual and left over parts trees. Looking for £150 each including UK shipping. Will be extremely well packed. Paypal, and buyer pays fees please.

I'd like this please. I'll PM you.

Aah, I found that out too after buying the TA05 shafts. I then had to buy the WR-02 shafts too: The #53792 (tt01) & #54394 (wr02) are the same length but the #54394 (wr02) come with the longer stub axles. These are both for the shorter WR-02 arms. If you want universals for the comical length arms these are #53847 (wr02cb). However, these don't come with the longer stub axles. On my comical I wanted it to be a little wider so I used the #54394 (wr02cb) shafts with the #53847 (wr02) stub axles. This allowed me to then use the longer 9mm hexes. (#54610) Here's the option parts list for both the WR-02 and WR-02CB https://d7z22c0gz59ng.cloudfront.net/cms/img/usr/inst/parts/wr02_PARTS_CATALOG.pdf https://d7z22c0gz59ng.cloudfront.net/cms/img/usr/inst/parts/wr02cb_PARTS_CATALOG.pdf Hope this helps.

My Hobbywing 10.5t was very fast. I certainly wouldn't want it any faster. And I was using the stock diffs that were all plastic. So I'm sure the plastic internals and the oil diff would be more than fine.

It's only the front that need some filing. I used Tamiya #42102 dampers, which I think are 55mm length. I ended up with 25mm of clearance under the chassis, which is more that enough if you intend to do some "scale" rally driving.

Thanks. for that. I don't use this forum too often so didn't see that change. Hopefully it'll be changed back soon.

Has the option to edit posts gone? I want to edit a few for sale threads I started, and now only have the option to 'report' or 'share'? Thanks.

What terrain are you using them on to wear the tires out so much?

SOLD

Bump

Happy to accept sensible offers now, before I end up eBaying it! Would also consider selling without electrics, however, the ESC fits neatly into the centre console box.

I no longer have a need for this lot. Looking to sell as a bundle. Happy with £35 posted.

SOLD

Prices lowered.

SOLD

SOLD

I've used them loads. Usually get customs charges. But they're prices are so cheap compared to buying in the UK that it doesn't really matter. Having said that, the last few times I've used the japan post ems shipping which Royal Mail bring and these haven't had charges. More by luck though I'd say.

PRICE LOWERED a little. Thanks very much. Aah, yes. I enjoyed the Trail King build.

Welcome to the reluctant sale of my beautiful custom built Hilux Flatbed. It was fully built using my own choice of custom parts. The build thread can be found here (note: some things have changed since the build. See specs below): https://www.msuk-forum.co.uk/forums/topic/227885-just-a-tf2-hilux-flatbed/ Here's a quick run down of the specs: RC4WD TF2 Chassis with Gelande 2 front hoops Bowhouse RC Skid RC4WD Yota 2 axles with hardened gears & Ballistic Fabrications diff covers with scale hardware. GCM Racing scale transmission with 8% overdrive with custom brazed mounts Gmade scale steel drive shafts Custom fabricated interior. Cubby box houses the HW 1080 esc RC4WD bucket seats and harnesses Custom brazed front winch bumper Custom brazed steel sliders Custom brazed steel flatbed/roll bar Custom built rear battery box, sunken into the bed RC4WD Hi-Lft jack included Fully working RC4WD Warn winch, and winch controller Working front led lights with a custom made light switch (works off 3rd or 4th channel) RC4WD 1.7” steel wheels with Yota hub, scale hardware, and disc rotors RC4WD Goodyear Wrangler 1.7” with custom foams, and weights RC4WD Bilstein shocks Soft rear red leafs. RC4WD rear shackle relocation kit RC4WD front shackle relocation kit Custom brazed rear anti-wrap bar (stops the rear leafs folding same as on 1:1 leaf trucks) Includes the following electrics: 2x Turnigy 3s Lipos suitable for the rear bed mount Holmes Hobbies 35t Torquemaster Pro motor HW 1080 esc Hitec 7955tg hi-torque metal gear servo RC4WD Warn winch RC4WD winch controller (works off 3rd or 4th channel) YOU WILL NEED to supply your own suitable 3 or 4 channel radio (needs to have a 3 position 3rd channel for the winch, and a 4th channel for the led's), and a suitable receiver Now the difficult part. The price. Adding this all up is well over £1200, and that in no way included the hundreds of hours in fabrication time, brazing rods, steel tube, etch primer, paint etc etc... So, seeing that a bog standard RC4WD Mojave RTR is £560, I'd be happy to clear £750 NOW £699 for all this. I'd rather have this collected but can post if absolutely necessary. Some up to date pics:

I've got a brand new one of these: https://www.lindinger.at/en/RC4WD-1-10-SCALE-RACING-SEAT-DARK-BLUE/9725084 £10 posted?

Bought these for a couple of projects but never used them. £22 each or £40 for both (inc postage). Details: +4mm option is great for Marlin style rigs that need a more aggressive approach angle. A&M Garage TF2 Regular, Marlin and LWB Leaf Spring Shackle Relocation kit. These brackets move the shackle from the front to the back of the front leaf spring. This provides the correct leaf functionality in a nice package, without having to force fit a different bracket. Includes all hardware. Instructions included. Watch the video... DRILLING A HOLE IN THE FRAME IS NO LONGER REQUIRED AS WE PROVIDE SPACERS AND HARDWARE NOW... https://aandmgarage.com/shop/ols/products/rc4wd-tf2-shackle-reversal-kit Here's the kit: Here's what it looks like fitted: Here's mine fitted (after I painted them): And finally, here's the fitting instructions:

I'll take these please. I'll PM you now.

Pm'ing you now

SOLD