ProjectBrutality

For sale is this almost brand new BSR Berserker Brushless Truggy. Only ran once for 20 minutes to test. Works like a charm and is super quick on 6S. Upgraded Hobao front and rear differentials (hardened steel) with 45000 wt differential oil and greased up with marine grease. Centre differential oil has been changed to 35000 wt to cope with the 6S power. Shocks have been rebuilt this week and now have 20000 wt shock oil. This is super fun to drive. Reason for sale is because I just don't have the space to run it. Spec list is as follows: - Motor: Turnigy XK-4082 1450KV 4 Pole ESC: Trackstar 150A Gen 2 1/8 Sensored / Sensorless Brushless ESC Servo: Turnigy HV 1269 High Torque Battery tray: 145 x 54mm Length: 530mm Width: 410mm Height: 205mm Wheelbase: 370mm Ground Clearance: 50mm Wheel size: 145x80mm Wheel hex: 17mm Drive Train: Full-Time 4WD Oil - front shocks: 20000 wt Oil - rear shocks: 20000 wt Oil - Front and rear diff: 45000 wt Oil - center diff: 35000 wt Required to run: - 1 x LiPo Battery Charger 1 x 2 Channel wheel style Radio TX/RX system Comes with extra shells (original is not pictured but it is included in the sale) stock photo for reference is in the photo list. Comes with extra differential parts, differential housings, rear wheelie bar carbon hop-ups and parts to fit, new RPM mud guards (One new in bag and the other was opened just to see what they looked like), a set of extra wheels and tyres as well as the originals, Arrma Notorious body shell, Horizon Hobby Chevrolet pickup truck shell, spare centre differential (46T) and larger pinion to run 4S lipo, a dust guard (Dusty Motors) and a 17mm wheel hex wrench. The battery has been used and is fully charged. Comes with the correct adaptor cable to fit to the truck's Speed Controller. Official Turnigy Basher 4000 MaH 6S 65C discharge battery. Local pickup is preferred but I can post (Ash, Aldershot, Surrey (UK). Clearly this item will cost quite a bit to post so buyer will have to cover charges unfortunately. I am looking for £350 (Paypal goods and services) which is a fair price considering all the extra parts you are getting in the sale. This truggy is pretty much RTR all you would have to include is a lipo charger and a Radio Receiver to get you going. Thank you for looking.

**Tamiya TA02 SW fully ball raced and complete with alloy and carbon hop ups** It is time to sell this very sought after Tamiya chassis as I am not using it anymore and it has been completely rebuilt with carbon and alloy hop ups over the last 2 months. Fully ball raced with Eddie's fast bearing kit. Loads of extra parts/spares which are included in the sale. Body posts and body clips are included. This comes with a radio receiver and servo (35Kg). You would still require a battery, motor and ESC to get this up and running. Comes with a balance charger as part of the sale. I can break this down for parts and sell separately. Ask for price on the parts that you need. Happy to post items. Perfect condition never been ran since new parts have been installed and everything you see in the photos is practically brand new. Happy to post at buyers expense and local collection is preferred. I'm looking for £300 or nearest offer posted recorded and insured also includes PayPal fees. Thanks for looking, Project 😄

Love this mate. Used to have one back when I was a little lad brings back so many awesome memories. Thanks for the post

Finally finished building two ta-02's. Porsche's naturally, the white one is a ta-02sw fully hopped up and ball raced with carbon chassis (the green duck tape is for protection). The black one is a standard is a normal ta-02 with some minor hop-up such as alloy steering arms and a 20kg servo again fully ball raced. Haven't taken them out yet but probably will in the near future.

BSR

Just fixed up the BSR beserker and general maintainence new diff oil and new shock oil. Back together now looking fresh. Prob will bash it this weekend and do a video.

Did a massive shell project for the tamiya TA-02 Polizei Porsche 934 with lights and livery.

Just some hop ups for the DT-03 and some new wheels for the ABC gambino.

Finished building and having a maiden voyage of the Tamiya DT-03 racing fighter today. Then turned it into a lifted NSU TT.

Chaps she is back together fully working again. Took her out for an hour and ran 2 packs through her. No problems so far. Will keep you updated on the progress.

Yes I shimmed the differential. The gear differential oil weight I am using is 20,000 wt. Lol thanks for the advice Jumper in regards to the oven temps not being high enough. I just need really hard diff gears. I think I know where I went wrong I didn't grease the crown gear on the differential so that could have caused problems and the temp got way to high and broke the diff gears. I will be taking apart the hobao differentials when they arrive to check if it has washers inside the diff housing which could be another reason why the BSR diff gears shattered (BSR diff does not have washers inside the diff housing from the factory). Many things to consider but I will keep you updated. Cheers guys.

Hi all, I have this truggy and have owned it since last year (October). I have run it 5 times so far within the last 8 months and it has gone through 3 rear differential internal gear sets so far. It seems to like to eat them, the gears have been hardened through sticking them in the oven for 20 minutes and then letting them cool down appropriately. This has made no difference to the longevity of running the BSR Berserker (Run time normally 10 to 20 minutes until differential failure). I don't bash my BSR hard normally just race it up and down the grass so the dog can chase it and have fun. I run a 6s with the correct running gear that comes with the BSR kit. I have now ordered 2 complete Hobao Hyper 7 Differential kits including housing from ebay. I will install them into the BSR and see how they get on. I will keep you all updated. We will see if it is a success.