Lucas2504

I've got some strangely Branded "GOOLRC" transmitter and receiver that looks suspiciously like a rebranded dx2l, anyway, when binding, with the receiver in bind mode and the LED rapidly flashing as it should be, I turn the controller on while holding the bind button, then the led on the receiver stops flashing, so it must detect the controller, it should do this if the bind is finished. But then after this if I attempt to turn on the esc, it blinks red indicating no receiver signal...... Any help would be great

i've got one attached to a .28 macstar, I believe thats what your after?

bump

Selling all my Hyper stuff to make space in the house, car is working apart from i threw an old servo in there so the steering may/may not work. Otherwise has an etronix 150a 6s rated esc with a REDS racing v8 (2100kv i think) motor, both have original box, losi 8ight battery tray modded(ish) to fit, just bought the receiver and transmitter only used a couple times, tire wise, there is a good set of proline badlands+some white disk worn offroad tires great for bashing, the rest of the tires are all in fine condition, just are in various states of being glued/not or have inserts/not. £ 410 Listing is open to offers, more details in the listings description. Feel free to ask any questions, (also no delivery it is far too large) more details on listing: https://www.ebay.co.uk/itm/263533639285

OK no worries, I'll take it anyway I'll PM you when I'm home in an hour

Would you be willing to sell without shocks?

Looking for a chassis for an electric conversion, does not need shocks, wheels/tires or spoiler. Can be very barebones I don't even really need a rear assembly/centre diff, mine is just battered and so much needs replacing and another one would be much less hassle than a total rebuild. If anyone has one, PM me and we can decide what parts.

ok motor works perfectly now on other esc, must be the esc, thanks all

I would have had to remove the wires but I suppose I could, I'm just not great at soldering.

ok I managed to borrow a friends 4s capable esc and the motor responds but it jitters at a constant rate, when i pull the throttle it spins up but whilst jittering (yes i used a 4s batt). But tbf it was not wired up well, im thinking my esc->motor wire is cut internally somewhere.

Oh, ok then, not sure what I do from here, is there a way to see if its the esc? Like test for current on motor wires, just so I don't have to buy both new ones.

Not too hot to touch, but more than just warm

Oh the lipo is fully balance charged, also the ESC flashes red on low voltage so I doubt its that but thanks

Yeah it is 6s capable, reds v8 2100kv motor. I'm also on a budget, so I have no other motors or escs to test with :-/, sell anything I don't need. Abuse wise, I've driven it for 20 mins no issues, that's it, it was second hand though...

After finally getting my 6s hyper 7 running this afternoon, the motor has suddenly become unresponsive, does not beep when ESC is on, no stutter or anything. But the ESC flashes when I pull the throttle so it is getting the signal. The solder points do not cross and are solid, nothing has been changed I'm rather confused, any help appreciated

Thanks! Just ordered it.

Struggling to find a motor mount in England for my Hyper 7, looking for the sort the replaces part of the centre diff housing ideally.

thanks I just had a look (bit too much),I think ill just get some proline badlands, nanda blocks aren't fairing well

Yeah I probably am being a bit ham-handed, maybe i'll change the throttle sensitivity to compensate

Thanks! that helps a lot, i'll grab one of those trays.

oh of course, embarassing mistake

are there many already 5s batteries?, running a 3 and 2 in parallel seems like it would use a lot of space. But i had forgot about that

I've revently made a return to the hobby after a long break by converting my hyper 7 to 6s, although I'm finding that even whilst slowly winding up to half throttle the tire foams are flying out of the tires, the esc is dislodging itself and the battery is flying out of its velcro straps causing it to be badly damaged . Are there any tires that can hold up to 6s rpm's? Road or offroad I just want something that I use without limiting the car. Additionally what are the best methods for mounting an esc and battery in a hyper 7, i can't find much space for anything...I'm tempted to revert to 4s. Thanks in advance!

Would you be willing to sell either of the savages with no electronics?

dismantled and old hyper ss so that only the rear suspension was left for use as a trailer on the back of my hyper 7.