fornowagain

Some google fu has Scott Kerkes at [email protected] as a helpful sale rep

Payment Sent

Anyone have such a thing?

That's fine please forward payment details. Bank transfer or paypal is fine.

Can you price me a kit as follows? Axial Yeti XL rubber sealed (4) 6x10x3 (4) 5x11x4 (2) 6x12x4 (4) 8x16x5 (4) 10x16x5 (6) 15x21x4

Hi, I'll have to stick with the

My second son's xs for sale, he's into metal detecting now apparently. His since Christmas. It's just had a recent service, two packs since then. Anything worn was replaced, so bearings, drive cups on gearbox and diffs, dogs & slipper clutch. All stock except, replaced e-clips with bolts and extra strong traxxas shock ends. Adjustable turn-buckles. Comes with the new 60T spur gear fitted and the stock 56T. Wheelie bar, 3ch TR-40 transmitter, fresh un-bashed shell and 4x shock sox, manual. Priced to sell, SOLD

Don't need it, but never hurts to have a spare > Laing DDC 18w pump -

You were unlucky, he's got both 2200/2650 combos and sent the wrong one. Happens. I'd have asked him to ship the 2200KV using the discount, knowing his are not fakes, has stock (probably) and offered the discount as a good faith measure. I'd have taken it on face value. Agreed, sending it back was not an option, and that's the main drawback right there. Personally it wouldn't put me off, the savings are substantial and I can't say I've had the same issues, not in the last dozen HK imports. The motor alone, from a UK supplier is what?

No problem, pm'ed

Price drop

As above. Savage XS shock set (4), with aluminium threaded bodies (70-103mm) from the upgraded SS kit. Part number HPI 108169, cheapest retail approx

Just going by the axle which is 2.5mm

Nope, loads of bits and no car kit, sitting in customs

What's a funny size exactly, they look like 2.5x15mm? Try Axial AX31223 pins (Asiatees have some) or buy a length of silver steel and cut it down.

Looking for two of the short springs from the above kit, HPI 86762

No, 30k wouldn't flow through the piston holes. It would lock solid.

There's no difference, other than the viscosity. 40, 70 is thin. Look at it, if it pours, liquid, it's for shocks, diff viscosity is thick like treacle or even solid. Usually says 40k (40'000) or 70k up to 500k even 1m and higher.

Stick to traxxas 2443 and be done with it.

I have Gensace 140/47/25 and they're hardcase with modified power leads, 90 degree bananas. Can see anything much longer going in.

You want the case? Long shot, put a wanted for a doa one or try the guy that repairs ESC's. Maybe he has a dead one laying around.

I have the Alza servo plate which uses two braces and does away with the whole box. One of the braces becomes a top spar for the servo linkage. Far stronger setup than stock.

Rock solid.