abarth_1200

One of Banggoods 1/24 crawlers, highly rated I understand but I'm new to the hobby and needing pass it on to go towards other interests as haven't used it much since purchasing. Comes with controller, 2 lithium battery packs, original wheels/ tyres. Has upgraded shocks and rc4wd steel rims with rc4wd beadlock tyres which make a huge difference. Never used outdoors and only ran 2-3 batteries through it. Comes with everything out the box so ready to run. Asking £60 plus £4.50 postage in the UK. PayPal accepted, please add 3% if paying goods. I have great ebay feedback if your interested I can provide a reference.

So I've got this on it's way looking for wheels and tyre sizes and battery type so I can order up a few bits ahead of it's arrival Interested to hear anyone's views on these models and owners upgrades etc. And decent place to find spares/upgrade parts for them, I understand they are similar to FTX mini outback at least. Thanks for now Sent from my iPhone using Tapatalk

I just found the mini crawler section Please move if possible Sent from my iPhone using Tapatalk

Hi I’ve just jumped in and bought a RGT 1:24 crawler. Now while I wait for it to arrive I’m looking at upgrades, wanting to sort out some wheel weights/ heavier wheels and a second set of tyres. Also another couple of batteries and decent charger. Are the wheels 1 inch diameter stock and 7mm hex fitment? Until I get the model I’m just reading as much as I can and I’ve gathered these bits of info. Will be used indoors 99% of the time Sent from my iPhone using Tapatalk

Got it thanks, all boxed ready to post.

Sold pending funds

Just your radio gear and a Lipo charger. I could sell you mine but not at this price. Pmed you.

Bump Price drop, need this gone to fund Kitchen rewire project

Might look into that, needing some alu rims too with some better drift tyres. I take kyosho bodies only come in one length so any will fit the wheelbase as is. Sent from my iPad using Tapatalk

Great info thanks, car looks great. Ordered the alu hubs and diff brackets already. Will add those aly bushes. I'll wait till I break a shaft tho, this little car is doubling in cost. What are some good diffs for drifting with this car. Do I want solid diffs like it currently has or do I want a ball diff or something. Also what is that bracket at the front, is that to hold mini-z bodies.

Hi guys, recently picked up one of these for a really good price, almost throwaway. Great little drifter, ideal speed and size for indoor tile, wood and carpet. I've trimmed the body a bit better and moved it lower on the body mounts, looks way better but I can't help thinking the stock wheels are too small. On to the problem I'm having, the front suspension hub pops out of its bushing when it gets compressed all the way, ending up in the car slammed onto its chassis, wih only about 4mm ground clearance you can see my problem. Anyone have these cars and any fixes or ideas, I'm thinking about getting the aluminium hop up hubs to see if they are a better fit. But as for right now this is how it's staying. Right hand in picture you can see the hub has popped past it's bushing. Left is currently still in place for comparison. Sent from my iPad using Tapatalk

1/14 you will need your own radio gear at the price im advertising. I would like to keep my radio gear for my other models. You can pick up a decent setup for

Sorry I cant go that low, postage alone is going to cost close to

Anyone interested? It's nearly new. Sent from my iPad using Tapatalk

I did see your sale thread, im not looking for nitro at the moment, new house means no garage and full shed so no space to work on cars unless indoors. Good luck with your sale.

So I'm selling my newly acquired M8, I have run it 8 times on the new Nanotechs I bought to go with it. It's got a few upgrades, t bone bumpers front and back, traxxas shock ends, exotek carbon top plate and spur gear guard. New Associated RC18 pinion and fresh losi spur gear. Mesh is set and runs great. I opened up the diffs when I got it and greased them for peace of mind. This is a tidy little M8 ready to run. Comes with manual, original parts, diff cases, 1/10 touring car wheels and tyres and the turnigy nanotech 2200 2s lipos. Delivered for

Hmm mine makes this similar noise, I have had everything stripped down, car was 10 packs old when I checked all these things and the only thing that might be causing it is the fear mesh. Other than that it's hard to not point to the driveshaft rattling in the out drive cups, which should be fine unless they are really worn out

Pm sent Sent from my iPad using Tapatalk

Hi guys, just bought a new house and obviously loft is a priority so I can get all the junk out the old house returned to its rightful resting place. So I have a ventilated loft space, 120mm thick glasswool fitted between the joists. And above me, Felt directly below the tiles all means it's a cold loft situation. I have this afternoon, cut up some kingspan 70mm insulation boards to fit in the loft hatch and laid this over the joists and then loft chip boarding over this. Only done about 2 sq metres, roughly 20% of the floor space in the loft. I will be doing another 6 boards of chipboard worth this way and then I will roll out 200mm knauf earthwool over the remaining loft area not needed for storage, keeping a small gap at the eaves to provide ventilation. But- I'm now rethinking my great idea, I'm worried about condensation, warm moist air rising up through my plasterboard ceiling, through the existing glasswool and hitting the foil face of the kingspan board. Do I need to worry about this? And another thought, can I staple building paper to the underside of my roof rafters to keep the draught and dust/dirt out my loft space, this would still allow ventilation to the underside of my tiles but would keep the most of the draught and dirt out my loft, possible to do this? Should I use breathable paper? Or foil backed bubble wrap even Sent from my iPad using Tapatalk

Hi everyone, I havent used this since the start of this year so looking to sell it on to somebody who will use it. I stored it with after run oil and checking just now the motor turns with good compression. Last I used it she was running fine, nice and torquey engine, pulled wheelies and drifted on tarmac. Comes with original radio gear. Spare body shell in great condition. Have got all original spare parts bags with longer arms and stiff spring set. When I got it I replaced the soft springs with the stiffer ones and renewed the shock oil, cant remember what weight. Also have the manual. Also new one way bearing for eazy starter. I had bought a new ST racing 3 shoe clutch set and flywheel and Traxxas clutch bell for it along with bearings just before I stopped using it so they are inlcuded. Not much more to say other than it is an honest, clean rc car. Any question pm me, ill try my best to help. Looking for around SOLD

I have a Traxxas revo waiting for a new owner

Now SOLD thank you.

Any offers

Run on 25% nitro fuel by original owner, I popped a few drops of after run oil down its throat when i decided to pack it away.

Hi everyone, I bought this off here end of last year with the intent on fitting it in my Hyper SS buggy, didnt realize at the time of my spontaneous purchase that I would need a starter box! So I have had it wrapped up in my garage waiting for a rainy day, but since then I have changed interests and decided to sell it. Here is the engine spec And here is the orignal post I bought it from Pictures of the engine in my hands Losing money on it anyway so im only looking for