bigsi40

Thanks for all the good advice i double checked all the settings and they are what have been posted,After doing this it ran a bit better and not so fast but it was still running fast enough to keep the clutch engaged. So i was getting fed up with it and went mad and undid the idle screw all the way so there was no gap and tryed to start the engine,And to my surprise it started and ran but not as fast as before so i thought what have i done in between undoing the screw and starting?? The only thing i did was turn the radio gear on (there was no trim set) so i thought that could not have opened the carb,To check i looked down the carb. with radio off and there was no gap turn it on and worked the throttle a bit to make sure it moved and a gap appeared I watched what was happening and the spring on the throttle link was pushing the servo so this would create a gap. Not sure if the servo has worn out or just needs adjusting problem is i only saw this happening just before the battery died so have not been able to try and fix it yet will have another go tommorrow. I'm a bit more pleased now that the engine might not be broke and just needs a servo or adjustment and maybe a bit more fine tuneing. Thanks again for the top advice Bigsi

I have taken the HSN out to 3 turns the gap on the carb is roughly 1mm. I have read and re-read the tuneing guides and think every thing is were it should be but still no luck it just revs like mad. Thanks Bigsi

I am having problems with my engine in my hyper the engine is a Thunder Tiger Pro 28. The engine was running fine when i stored it away got it out about a month ago and had problems with it cutting out. While investigating this i noticed that the clutch had fell apart so fixed that. The problem now is that the engine just revs really fast no matter where the tuning is set. I am confidant that it is all set back to factory settings and the idle speed gap is set correctly there is no trim added either. I have checked to see if there is an air leak by covering up the carb intake and it just stops dead so no air leak. Anyone have any more ideas? Because i'm stumped and getting p'ed off . I have no cash to get a new engine so this looks like it could be the end of the hyper for a while and could spend the rest of its life living in the shed or bin So can you help to stop me from throwing it away because that's what i fell like doing now. Bigsi

Thanks for the reply i did meen the one from the tank to the engine it sits at the top of the tank and once the fuel fell just below that it would cut out only thats why i was gettin confused as there is loads of fuel left in the tank but it was stopping it never even crossed my mind that there is a tube inside the tank going to the bottom that could be broken Unfortunatly i have not got time to take a look now of to a family bbq will have to wait till next weekend Thanks Bigsi

Hi all, I took the Hyper 7 out today for the first time in a few weeks and it's developed a problem.The last time i had it out it was fine but today every time the fuel went below the supply nipple it would cut out.I checked that it was tuned proplery it would run perfectly for a few mins then would cut out after a few attempts the only thing i noticed different was that the fuel level had droped below the nipple filled it back up and it would run fine till the fuel dropped. So there is the problem full fuel runs fine drops just below nipple stops.Any surgestions on what could be causeing this? I have checked the fuel pipes are not split,i can't see a hole in the tank,the tank lid seems to be sealing.These are the only things i could think of checking that might be causeing this problem. Thanks for any help Bigsi

Hopefully the more people that listen or just open up the player will give the bbc a better listening figures and they will be more inclined to do more live commentrys good for Ice Hockey fans Its just like viewing figures on t.v more people watch a programme the more of that programme they will make

Thanks just copied and pasted this one should work Live Ice Hockey Linky Also after clicking listen live on their site you will need to click on open in stand alone player. Thanks again Bigsi

Hi, I am a Ice Hockey fan who supports the Coventry Blaze and G.B Ice Hockey teams and i would like your help as a fellow playstation user.Ice Hockey is still a minority sport in G.B. so any coverage we get is good.This post is to ask you to read this and if you can click on the link:- Guys and gals - this is the big one. Friday night at 7pm. We need you supporting the GB team at home and we need you clicking on the comentary link. One final time from Poland and I'll leave you alone !! Just a few minutes makes all the difference. PLEASE make the effort to click the link and get the hit count up as high as possible. This is so important. If any of you can post this on your own club forums I'd really appreciate it. Great Britain will go for bronze on Friday night at 7pm Great Britain's mens team will have the chance to skate for bronze on Friday night when they close the 2009 IIHF World Championship Division 1 Tournament in Torun, Poland. GB will play the final game of the event against the hosts in front of a patriotic home crowd knowing that the winner of the game will take home a bronze medal. It's the biggest game for the team for eight years, the last time the team won a medal at this level being in Slovenia in 2001 when they finished in second place. After surviving five straight relegation battles to finish in fifth place between 2003 and 2007, Paul Thompson's men made a significant step forward at the 2008 Championships in Austria by moving up one place to finish fourth. With one game to go in this tournament, the team is already assured of fourth spot but now has the chance to go one better and bring home a medal. Live commentary of the game in a programme that starts at 6.55pm UK time Live Ice Hockey <------------- LINKY The more people that can do this and get the hit count up will give the BBC more incentive to keep on doing live broadcast whice every Ice Hockey fan would be greatfull for If you could do this it would be excerlant any more info please just ask Thanks in advance Bigsi

Jump as high as you can lots of fun.I have broken more things on my hyper from small jumps and running into things than i have from jumping high. Me and my mate were at the local track and he wanted to get some video of it doing some jumps so he stood near the biggest jump with his camera,I wanted to make it look good so i really gave it some over this jump but got the angle a bit wrong and it headed straight towards my mate but i could see it was going over his head (it was about 8ft high) i landed safely and ran over to him saying "hope you have that on tape",His reply was DAMN NO I WAS WORRIED FOR MY FACE (cleaned up for family forum) These are strong cars and only seem to damage if they land or hit something at weird angles Have fun Bigsi

Hi, I have been clearing out my bed room and i have found some old official football programmes i remember sending of for these from Match football Magazine when i was at school and before i found the great sport .They are all from the late 80's early 90's There is nine in total all good condition and from different clubs.There is one or two that stands out as its a Chelsea v Tottenham and it says on the front its a 80th anniversary special edition.The other is a Sheffield derby game in the Zenith Data Systems Cup 2nd Round Northern Section.(never heard of this comp.) After that long opening basicly my question is were do you think the best place to sell these would be im guessing people collect old programmes would it be on e-bay or is there some where more specific. Thanks for any info/help Bigsi

Just seen this on the local news (midlands today) to save me alot of typeing i will post a link :-R/C LAND SPEED RECORD sorry if its been posted before Bigsi Ps hope he does it good luck

I was thinking that there may be a problem with that, but i was taken in by the bling of the nice BIG wheels I will have a search for the HPI ones mentioned i couldnt find many 12mm hex ones when i searched earlier Thanks you both for the replys Bigsi

I want to put some bigger/better looking wheels and tyres on my Thunder Tiger ssk but i have a problem so i thought i would ask you knowledgeable people The wheels tyres im looking at are made by pro-line i think they are called 40 series with moab tyres but the problem i have is the hex size, on my ssk its 12mm but the pro-lines are 24mm .Is there an adapter to make these fit?Can you get good looking 12mm hex wheels?(i've had a look and can't find many). Thank you for any help/info/abuse/anything. Bigsi

I had the same problem with the ssk i just brought (exhaust hitting wheel on right turns) all i did was cut the cable ties on the rubber bit of the exhaust and push the metal bits closer together and re-cabled tied,It worked for me no longer hits the wheel It also had a problem with the grub screw that holds the rear drive shaft to the diff output shaft comeing loose all the time so it would try to put all the power through the front wheels i just took them out put lock tight on them and havent had a problem with that know. The only problem i have know is i cant do the screws that hold the engine still up enough so the engine moves and strips the plastic spur gear Will need further investigation on how to stop this when i have time Bigsi

Thanks for the quick replys.Its amazeing how much fun it is going round the back garden looking for things to drive over I'm like a little kid all over again even looked for some old cars to drive over proper monster truck still Bigsi