liamb2387

Hi. Anyone have any tips on setting up the above flight controller. I have just acquired a dji 450 and it seems to be flying ok but it does pull to the right and doesn't hold it position that well. I have calibrated the gps, made sure the quad has a good centre of gravity and checked the trims on the Rx. Anything else I could try for a more stable flight? Also, has anyone recently upgraded the naza m lite to v2 firmware? I tried this just the other day and it didn't work. I wondered if dji had possible cracked down on it.

Turned out to be a dodgy motor!

I don't but the one I'm using is brand new

Tried a 3s - no difference Sent from my Nexus 5 using Tapatalk

Could the problem be that I'm only using a 2s lipo until my 3s arrives?

Cheers for the suggestions

So your saying it should be ok as it is?

I'm sure the minimum is 1000 and max is 2000! Sent from my Nexus 5 using Tapatalk

Wonder if it's something to do with the transmitter

Nope. Not been in the air yet Sent from my Nexus 5 using Tapatalk

I'll take a look. Anything else it could be? I tried to calibrate the escs but I didn't get any beeps to confirm it had worked

Yeah

No, just the firmware it automatically gives you. How would I pick another version?

I have yeah. Repeatedly gone through the full setup wizard. mainly out of frustration Sent from my Nexus 5 using Tapatalk

Hi. Anyone have any experience with the arducopter fc's? Problem im having is that everything thing seems to be set up right. The drone arms but the motors won't spin! Any help?

You definitely adjusting the right thing? Normally similar to the twisty bit on a radiator

60 is too high for a blow gun. Max pressure on mine is 30 I think. Try that Sent from my Nexus 5 using Tapatalk

Or could be opposite to what Danny suggested...is the reg psi set too high for the blow gun?

Sounds strange because if the tank really is full it should take a little while until it's empty and you'd hear the air escaping Sent from my Nexus 5 using Tapatalk

Is the little brass screw at the bottom of the compressor closed?

Raspberry pi 3

Pm'd Sent from my Nexus 5 using Tapatalk

Cheers for the suggestions. So should I stay away from the team Orion one? Sent from my Nexus 5 using Tapatalk

Don't really understand charge rates if I'm honest Sent from my Nexus 5 using Tapatalk

Not a massive lipo user and not likely to ever be. Couple of 3s and 4s lipos for my drone - around 2300mah and a couple of 2s receiver packs for my nitro buggy. Couple of 12v leisure batteries and then the usual NIMH and nicads Sent from my Nexus 5 using Tapatalk