drcarlos

Total will be about

I am fine with it being a roller, I have a brushed ESC and LRP motor to go in to start with and then like you said we'll be off to hobbyking for some brushless action (probably a Turnigy Waterproof setup). Don't want an RTR really as I already have 2.4ghz radio sets spare and it's a waste really. Were on a low budget for the rolling chassis,

Hi, I am looking for a 2WD racing buggy for my 12 year old to race at the local track and was looking at the H2 Pro as it's only

So I got 3 LRP brushed (Blue E, White E and Pink E) motors delivered today (for my lads Maverick Strada MT) and have tried out two of them but I seem to be getting massive amounts of interference on the 2.4Ghz system that it won't run at all, as soon as you apply power it drops connection. There are caps fitted to the motors and I experimented with moving the receiver, cabling and antenna but it has little impact (hold long enough to move slowly then drops). I am using Acoms technicsport 2.4Ghz systems and have tried both sets and they both perform the same. So I dug out the old Technisport 27AM from the loft and plugged it in and away we went (it was a little glitchy but mostly fine) and it's certainly faster than before. Getting fed up of stripping down changing things now. I have a new ESC coming from MSUK tomorrow (Hobbywing Quicrun 1060) but this was intended for my WildOne so I can run one of these new lairy LRP motors and I also have my Eurgle 2.4 set too in case the Technicport in known to have these problems. I really want to use the Acoms 2.4Ghz setup though so does anyone have any ideas that I can try to eliminate this interference? According to the marketing 2.4 is supposed to fine with motors, but this clearly isn't. Could it be the cheap ESC I got from eBay? Cheers, Carl.

So I just won an auction on 3 LRP motors freshly rebuilt and tested for about

Just found this on the MS site http://www.modelsport.co.uk/team-orion-rush-27x1/rc-car-products/12869 and it looks like a bargain at half price, any good? Carl.

Would both esc's be able to handle those? I know the tamiya has a 25t limit so it could be a bit brutal for it. Just want something the will be fun and not melt.

So after 20 years away from electric rc (Been gas powered in the meantime) I bought my boy a maverick strada evo mt, quite decent for the price but omg it was so slow. My first thought was that the first owner damaged the motor, so I popped down to the local rc shop and bought a replacement which they recommended an ansmann clash 23t stocker. This was used about 10 times and wasnt really much better and then the ESC packed in, off to the bay this time and one of the