adamgav

Bump, will now take £22 for the BNIB quad

Hobbycraft 5mm foamboard is 2 sheets for £7 and works perfect. I built a spitfire and tiny trainer from 3 1/2 sheets.

I have two available. These have large controllers with built in storage for the quad unlike the horrible micro controllers supplied with other nano quads. This is the new 'Worlds Smallest Quadcopter'. Makes other nanos look huge. Works well outside in calm conditions. These have an auto flip function and 3 sensitivity modes. Both include 4 spare blades and a USB charger. These are selling for £30+ on eBay Perfect gift. Im looking for £27 posted for a brand new in box, unopened one. £23 for the opened lightly used one. I accept PayPal. Feel free to collect from Yateley, Hampshire GU46

Search it in google. Should be on 3dr robotics website. Some good guides on the APM 2.5 flight controller that's in the nova

The RTH issues can be solved by adjusting the RTH final decent height, decent speed and the loiter time before decent in the mission planner or APM planner software . So many parameters to play about ! Once you have a little experience you can change the max tilt angle to make it a much more agile quad. And able to fly against wind better.

Sold!

For sale is my Cherson CX20 Quadcopter. 350 size, its a cheaper alternative to the DJI phantom, however once set up correctly it boasts the same if not more features due to it being powered by the Opensource APM 2.5.2 flight controller. This is fully customizable through Mission Planner software. It is capable of fully automated waypoint missions. It has a very stable loiter mode and many other flight modes such as intelligent orientation and Return to home. I am only selling this as I have built a bigger hexacopter as I require a larger machine for heavy lifting. I bought this from china, and have opened it up to check all solder joints were acceptable and all was correctly positioned and stuck down. While I was in there I added a 12V power for a brushless gimbal I had fitted. I have modified and fitted some carbon phantom legs. The originals are also included. It has standard props and also some carbon 9445 self tightening props. The charger is brand new as I have been using my Turnigy Accucell 6. I have sharpied on the transmitter my gimbal controls to make it easier for me to adjust while flying. Im guessing it would come off with a little elbow grease. Whats included: Cheerson CX20 Transmitter Charger Solid GoPro mount Carbon Landing gear Carbon 9445 Props 4x Turnigy 2200mah Lipos 1x Cheerson 2700mah Lipo Looking for

As the title says preferably a roller, but any considered! Thanks

Sold

I am not sure on what pole the motor is. It's originaly from a hpi firestorm so a quick search should answer your question. I can take a photo for you asap

I have an HPI Motiv esc, which I believe is a rebranded castle creations sidewinder v2. It's in good condition. Can be run on 2s lipo and I think also 3s but check before you buy. Also have a HPI 4600kv motor also in good condition. I am only selling it as my brother bought a sensored setup and I prefer it to the unsensored gear. Looking to get back what I paid.

Hi looking for a brushless combo. Let me know what you have got!

Thanks for the replays however I have found a car now!